[PATCH 33/57] arm: Remove mx53ard board

[Tom Rini <trini@konsulko.com>]

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/mach-imx/mx5/Kconfig            |   5 -
 board/freescale/mx53ard/Kconfig          |  15 --
 board/freescale/mx53ard/MAINTAINERS      |   6 -
 board/freescale/mx53ard/Makefile         |   7 -
 board/freescale/mx53ard/imximage_dd3.cfg |  82 ------
 board/freescale/mx53ard/mx53ard.c        | 319 -----------------------
 configs/mx53ard_defconfig                |  31 ---
 include/configs/mx53ard.h                | 170 ------------
 8 files changed, 635 deletions(-)
 delete mode 100644 board/freescale/mx53ard/Kconfig
 delete mode 100644 board/freescale/mx53ard/MAINTAINERS
 delete mode 100644 board/freescale/mx53ard/Makefile
 delete mode 100644 board/freescale/mx53ard/imximage_dd3.cfg
 delete mode 100644 board/freescale/mx53ard/mx53ard.c
 delete mode 100644 configs/mx53ard_defconfig
 delete mode 100644 include/configs/mx53ard.h

diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
index 2ffa3fa61690..f7ea471fe717 100644
--- a/arch/arm/mach-imx/mx5/Kconfig
+++ b/arch/arm/mach-imx/mx5/Kconfig
@@ -44,10 +44,6 @@ config TARGET_MX51EVK
 	select BOARD_LATE_INIT
 	select MX51
 
-config TARGET_MX53ARD
-	bool "Support mx53ard"
-	select MX53
-
 config TARGET_MX53CX9020
 	bool "Support CX9020"
 	select BOARD_LATE_INIT
@@ -87,7 +83,6 @@ config SYS_SOC
 
 source "board/beckhoff/mx53cx9020/Kconfig"
 source "board/freescale/mx51evk/Kconfig"
-source "board/freescale/mx53ard/Kconfig"
 source "board/freescale/mx53evk/Kconfig"
 source "board/freescale/mx53loco/Kconfig"
 source "board/freescale/mx53smd/Kconfig"
diff --git a/board/freescale/mx53ard/Kconfig b/board/freescale/mx53ard/Kconfig
deleted file mode 100644
index 41f46a04ac78..000000000000
--- a/board/freescale/mx53ard/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_MX53ARD
-
-config SYS_BOARD
-	default "mx53ard"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "mx5"
-
-config SYS_CONFIG_NAME
-	default "mx53ard"
-
-endif
diff --git a/board/freescale/mx53ard/MAINTAINERS b/board/freescale/mx53ard/MAINTAINERS
deleted file mode 100644
index fa81afe9a330..000000000000
--- a/board/freescale/mx53ard/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MX53ARD BOARD
-M:	Fabio Estevam <fabio.estevam@nxp.com>
-S:	Maintained
-F:	board/freescale/mx53ard/
-F:	include/configs/mx53ard.h
-F:	configs/mx53ard_defconfig
diff --git a/board/freescale/mx53ard/Makefile b/board/freescale/mx53ard/Makefile
deleted file mode 100644
index e963a240256f..000000000000
--- a/board/freescale/mx53ard/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2011 Freescale Semiconductor, Inc.
-
-obj-y	:= mx53ard.o
diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg
deleted file mode 100644
index fd033187b7cd..000000000000
--- a/board/freescale/mx53ard/imximage_dd3.cfg
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009
- * Stefano Babic DENX Software Engineering sbabic at denx.de.
- *
- * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM	sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *	Addr-type register length (1,2 or 4 bytes)
- *	Address	  absolute address of the register
- *	value	  value to be stored in the register
- */
-DATA 4 0x53fa8554 0x00300000
-DATA 4 0x53fa8558 0x00300040
-DATA 4 0x53fa8560 0x00300000
-DATA 4 0x53fa8564 0x00300040
-DATA 4 0x53fa8568 0x00300040
-DATA 4 0x53fa8570 0x00300000
-DATA 4 0x53fa8574 0x00300000
-DATA 4 0x53fa8578 0x00300000
-DATA 4 0x53fa857c 0x00300040
-DATA 4 0x53fa8580 0x00300040
-DATA 4 0x53fa8584 0x00300000
-DATA 4 0x53fa8588 0x00300000
-DATA 4 0x53fa8590 0x00300040
-DATA 4 0x53fa8594 0x00300000
-DATA 4 0x53fa86f0 0x00300000
-DATA 4 0x53fa86f4 0x00000000
-DATA 4 0x53fa86fc 0x00000000
-DATA 4 0x53fa8714 0x00000000
-DATA 4 0x53fa8718 0x00300000
-DATA 4 0x53fa871c 0x00300000
-DATA 4 0x53fa8720 0x00300000
-DATA 4 0x53fa8724 0x04000000
-DATA 4 0x53fa8728 0x00300000
-DATA 4 0x53fa872c 0x00300000
-DATA 4 0x63fd9088 0x35343535
-DATA 4 0x63fd9090 0x4d444c44
-DATA 4 0x63fd907c 0x01370138
-DATA 4 0x63fd9080 0x013b013c
-DATA 4 0x63fd9018 0x00011740
-DATA 4 0x63fd9000 0xc3190000
-DATA 4 0x63fd900c 0x9f5152e3
-DATA 4 0x63fd9010 0xb68e8a63
-DATA 4 0x63fd9014 0x01ff00db
-DATA 4 0x63fd902c 0x000026d2
-DATA 4 0x63fd9030 0x009f0e21
-DATA 4 0x63fd9008 0x12273030
-DATA 4 0x63fd9004 0x0002002d
-DATA 4 0x63fd901c 0x00008032
-DATA 4 0x63fd901c 0x00008033
-DATA 4 0x63fd901c 0x00028031
-DATA 4 0x63fd901c 0x052080b0
-DATA 4 0x63fd901c 0x04008040
-DATA 4 0x63fd901c 0x0000803a
-DATA 4 0x63fd901c 0x0000803b
-DATA 4 0x63fd901c 0x00028039
-DATA 4 0x63fd901c 0x05208138
-DATA 4 0x63fd901c 0x04008048
-DATA 4 0x63fd9020 0x00005800
-DATA 4 0x63fd9040 0x05380003
-DATA 4 0x63fd9058 0x00022227
-DATA 4 0x63fd901C 0x00000000
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
deleted file mode 100644
index f9ec5ca6ef35..000000000000
--- a/board/freescale/mx53ard/mx53ard.c
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx53.h>
-#include <linux/errno.h>
-#include <netdev.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <asm/gpio.h>
-
-#define ETHERNET_INT		IMX_GPIO_NR(2, 31)
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	u32 size1, size2;
-
-	size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-	size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
-
-	gd->ram_size = size1 + size2;
-
-	return 0;
-}
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-
-	return 0;
-}
-
-#ifdef CONFIG_NAND_MXC
-static void setup_iomux_nand(void)
-{
-	static const iomux_v3_cfg_t nand_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
-				PAD_CTL_PUS_100K_UP),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
-				PAD_CTL_PUS_100K_UP),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-	};
-
-	u32 i, reg;
-
-	reg = __raw_readl(M4IF_BASE_ADDR + 0xc);
-	reg &= ~M4IF_GENP_WEIM_MM_MASK;
-	__raw_writel(reg, M4IF_BASE_ADDR + 0xc);
-	for (i = 0x4; i < 0x94; i += 0x18) {
-		reg = __raw_readl(WEIM_BASE_ADDR + i);
-		reg &= ~WEIM_GCR2_MUX16_BYP_GRANT_MASK;
-		__raw_writel(reg, WEIM_BASE_ADDR + i);
-	}
-
-	imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
-}
-#else
-static void setup_iomux_nand(void)
-{
-}
-#endif
-
-#define UART_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
-			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-static void setup_iomux_uart(void)
-{
-	static const iomux_v3_cfg_t uart_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, UART_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, UART_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-}
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR},
-	{MMC_SDHC2_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	int ret;
-
-	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
-	gpio_direction_input(IMX_GPIO_NR(1, 1));
-	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_4__GPIO1_4);
-	gpio_direction_input(IMX_GPIO_NR(1, 4));
-
-	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
-		ret = !gpio_get_value(IMX_GPIO_NR(1, 1));
-	else
-		ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
-
-	return ret;
-}
-
-#define SD_CMD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
-				 PAD_CTL_PUS_100K_UP)
-#define SD_CLK_PAD_CTRL		(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
-#define SD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
-				 PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(struct bd_info *bis)
-{
-	static const iomux_v3_cfg_t sd1_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_CLK_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
-	};
-
-	static const iomux_v3_cfg_t sd2_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_SD2_CMD__ESDHC2_CMD, SD_CMD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD2_CLK__ESDHC2_CLK, SD_CLK_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD2_DATA0__ESDHC2_DAT0, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD2_DATA1__ESDHC2_DAT1, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD2_DATA2__ESDHC2_DAT2, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD2_DATA3__ESDHC2_DAT3, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA12__ESDHC2_DAT4, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA13__ESDHC2_DAT5, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA14__ESDHC2_DAT6, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA15__ESDHC2_DAT7, SD_PAD_CTRL),
-	};
-
-	u32 index;
-	int ret;
-
-	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-
-	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
-		switch (index) {
-		case 0:
-			imx_iomux_v3_setup_multiple_pads(sd1_pads,
-							 ARRAY_SIZE(sd1_pads));
-			break;
-		case 1:
-			imx_iomux_v3_setup_multiple_pads(sd2_pads,
-							 ARRAY_SIZE(sd2_pads));
-			break;
-		default:
-			printf("Warning: you configured more ESDHC controller"
-				"(%d) as supported by the board(2)\n",
-				CONFIG_SYS_FSL_ESDHC_NUM);
-			return -EINVAL;
-		}
-		ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-#endif
-
-static void weim_smc911x_iomux(void)
-{
-	static const iomux_v3_cfg_t weim_smc911x_pads[] = {
-		/* Data bus */
-		NEW_PAD_CTRL(MX53_PAD_EIM_D16__EMI_WEIM_D_16,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D17__EMI_WEIM_D_17,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D18__EMI_WEIM_D_18,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D19__EMI_WEIM_D_19,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D20__EMI_WEIM_D_20,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D21__EMI_WEIM_D_21,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D22__EMI_WEIM_D_22,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D23__EMI_WEIM_D_23,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D24__EMI_WEIM_D_24,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D25__EMI_WEIM_D_25,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D26__EMI_WEIM_D_26,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D27__EMI_WEIM_D_27,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D28__EMI_WEIM_D_28,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D29__EMI_WEIM_D_29,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D30__EMI_WEIM_D_30,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_D31__EMI_WEIM_D_31,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-
-		/* Address lines */
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
-				PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
-
-		/* other EIM signals for ethernet */
-		MX53_PAD_EIM_OE__EMI_WEIM_OE,
-		MX53_PAD_EIM_RW__EMI_WEIM_RW,
-		MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
-	};
-
-	/* ETHERNET_INT as GPIO2_31 */
-	imx_iomux_v3_setup_pad(MX53_PAD_EIM_EB3__GPIO2_31);
-	gpio_direction_input(ETHERNET_INT);
-
-	/* WEIM bus */
-	imx_iomux_v3_setup_multiple_pads(weim_smc911x_pads,
-						ARRAY_SIZE(weim_smc911x_pads));
-}
-
-static void weim_cs1_settings(void)
-{
-	struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
-
-	writel(MX53ARD_CS1GCR1, &weim_regs->cs1gcr1);
-	writel(0x0, &weim_regs->cs1gcr2);
-	writel(MX53ARD_CS1RCR1, &weim_regs->cs1rcr1);
-	writel(MX53ARD_CS1RCR2, &weim_regs->cs1rcr2);
-	writel(MX53ARD_CS1WCR1, &weim_regs->cs1wcr1);
-	writel(0x0, &weim_regs->cs1wcr2);
-	writel(0x0, &weim_regs->wcr);
-
-	set_chipselect_size(CS0_64M_CS1_64M);
-}
-
-int board_early_init_f(void)
-{
-	setup_iomux_nand();
-	setup_iomux_uart();
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
-	int rc = -ENODEV;
-
-	weim_smc911x_iomux();
-	weim_cs1_settings();
-
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}
-
-int checkboard(void)
-{
-	puts("Board: MX53ARD\n");
-
-	return 0;
-}
diff --git a/configs/mx53ard_defconfig b/configs/mx53ard_defconfig
deleted file mode 100644
index 7ccd40e6d978..000000000000
--- a/configs/mx53ard_defconfig
+++ /dev/null
@@ -1,31 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX5=y
-CONFIG_SYS_TEXT_BASE=0x77800000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_TARGET_MX53ARD=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg"
-CONFIG_DEFAULT_FDT_FILE="imx53-ard.dtb"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_USE_FLASH_BBT=y
-CONFIG_NAND_MXC=y
-CONFIG_MII=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0xF4000000
-CONFIG_MXC_UART=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
deleted file mode 100644
index b613e9816dac..000000000000
--- a/include/configs/mx53ard.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the MX53ARD Freescale board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MACH_TYPE	MACH_TYPE_MX53_ARD
-
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_SYS_FSL_CLK
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR_AXI
-#define CONFIG_MXC_NAND_REGS_BASE	NFC_BASE_ADDR_AXI
-#define CONFIG_MXC_NAND_IP_REGS_BASE	NFC_BASE_ADDR
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_MXC_NAND_HWECC
-
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_ESDHC_NUM	2
-
-/* Eth Configs */
-#define CONFIG_HAS_ETH1
-
-/* Command definition */
-
-#define CONFIG_ETHPRIME		"smc911x"
-
-#define CONFIG_LOADADDR		0x72000000	/* loadaddr env var */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"uimage=zImage\0" \
-	"console=ttymxc0\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_addr=0x78000000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"update_sd_firmware_filename=u-boot.imx\0" \
-	"update_sd_firmware=" \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"if mmc dev ${mmcdev}; then "	\
-			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
-				"setexpr fw_sz ${filesize} / 0x200; " \
-				"setexpr fw_sz ${fw_sz} + 1; "	\
-				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-			"fi; "	\
-		"fi\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${uimage}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loaduimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
-
-#define CONFIG_ARP_TIMEOUT	200UL
-
-/* Miscellaneous configurable options */
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-/* Physical Memory Map */
-#define PHYS_SDRAM_1		CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
-#define PHYS_SDRAM_2		CSD1_BASE_ADDR
-#define PHYS_SDRAM_2_SIZE	(512 * 1024 * 1024)
-#define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
-
-#define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
-#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
-#define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* environment organization */
-
-#define MX53ARD_CS1GCR1		(CSEN | DSZ(2))
-#define MX53ARD_CS1RCR1		(RCSN(2) | OEN (1) | RWSC(22))
-#define MX53ARD_CS1RCR2		RBEN(2)
-#define MX53ARD_CS1WCR1		(WCSN(2) | WEN(2) | WBEN(2) | WWSC(22))
-
-#endif				/* __CONFIG_H */
-- 
2.17.1