From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bin Meng Date: Fri, 12 Mar 2021 21:36:01 +0800 Subject: [PATCH v2 20/21] ppc: qemu: Enable eTSEC support In-Reply-To: <20210312133602.31105-1-bmeng.cn@gmail.com> References: <20210312133602.31105-1-bmeng.cn@gmail.com> Message-ID: <20210312133602.31105-21-bmeng.cn@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de QEMU ppce500 target can dynamically instantiate an eTSEC device if "-device eTSEC" is given to QEMU. This commit enables eTSEC driver and the required fixed PHY driver to create a usable network configuration using eTSEC. Unlike a real world 85xx board that usually stores the eTSEC MAC address in an EEPROM, CONFIG_NET_RANDOM_ETHADDR is required for QEMU otherwise U-Boot ethernet initialization complains no valid ethernet address is set. Signed-off-by: Bin Meng --- (no changes since v1) configs/qemu-ppce500_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index 151834b4cf..a1b9ea56ca 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -27,6 +27,7 @@ CONFIG_OF_CONTROL=y CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SIMPLE_BUS_CORRECT_RANGE=y CONFIG_BLK=y @@ -35,8 +36,11 @@ CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_FSL=y # CONFIG_MMC is not set +CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y +CONFIG_TSEC_ENET=y CONFIG_DM_PCI=y CONFIG_PCI_MPC85XX=y CONFIG_DM_RTC=y -- 2.25.1