public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 05/21] net: phy: fixed: Be compatible with live OF tree
Date: Fri, 12 Mar 2021 21:35:46 +0800	[thread overview]
Message-ID: <20210312133602.31105-6-bmeng.cn@gmail.com> (raw)
In-Reply-To: <20210312133602.31105-1-bmeng.cn@gmail.com>

From: Vladimir Oltean <vladimir.oltean@nxp.com>

On systems that use CONFIG_OF_LIVE, the "ofnode" type is defined
as const struct device_node *np, while on the flat DT systems it
is defined as a long of_offset into gd->fdt_blob.

It is desirable that the fixed PHY driver uses the higher-level
ofnode abstraction instead of parsing gd->fdt_blob directly,
because that enables it to work on live OF systems.

The fixed PHY driver has used a nasty hack since its introduction in
commit db40c1aa1c10 ("drivers/net/phy: add fixed-phy / fixed-link support"),
which is to pass the long gd->fdt_blob offset inside int phydev->addr
(a value that normally holds the MDIO bus address at which the PHY
responds). Even ignoring the fact that the types were already
mismatched leading to a potential truncation (flat OF offset was
supposed to be a long and not an int), we really cannot extend this
hack any longer, because there's no way an int will hold the other
representation of ofnode, the struct device_node *np.

So we unfortunately need to do the right thing, which is to use the
framework introduced by Grygorii Strashko in
commit eef0b8a930d1 ("net: phy: add ofnode node to struct phy_device").
This will populate phydev->node for the fixed PHY.

Note that phydev->node will not be valid in the probe function, since
that is called synchronously from phy_device_create and we really have
no way of passing the ofnode directly through the phy_device_create API.
So we do what other drivers do too: we move the OF parsing logic from
the .probe to the .config method of the PHY driver. The new function
will be called at phy_config() time.

I do believe I've converted all the possible call paths for creating
a PHY with PHY_FIXED_ID, so there is really no reason to maintain
compatibility with the old logic of retrieving a flat OF tree offset
from phydev->addr. We just pass 0 to phydev->addr now.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210216224804.3355044-2-olteanv@gmail.com>
[bmeng: keep fixedphy_probe(); update mdio-uclass.c to handle fixed phy]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

(no changes since v1)

 drivers/net/phy/fixed.c | 26 +++++++++++++++++---------
 drivers/net/phy/phy.c   | 30 +++++++++++++++---------------
 net/mdio-uclass.c       |  6 ++++--
 3 files changed, 36 insertions(+), 26 deletions(-)

diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index 1a38c29469..11342df1c5 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -17,13 +17,23 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int fixedphy_probe(struct phy_device *phydev)
 {
+	/* fixed-link phy must not be reset by core phy code */
+	phydev->flags |= PHY_FLAG_BROKEN_RESET;
+
+	return 0;
+}
+
+int fixedphy_config(struct phy_device *phydev)
+{
+	ofnode node = phy_get_ofnode(phydev);
 	struct fixed_link *priv;
-	int ofnode = phydev->addr;
 	u32 val;
 
+	if (!ofnode_valid(node))
+		return -EINVAL;
+
 	/* check for mandatory properties within fixed-link node */
-	val = fdt_getprop_u32_default_node(gd->fdt_blob,
-					   ofnode, 0, "speed", 0);
+	val = ofnode_read_u32_default(node, "speed", 0);
 	if (val != SPEED_10 && val != SPEED_100 && val != SPEED_1000 &&
 	    val != SPEED_2500 && val != SPEED_10000) {
 		printf("ERROR: no/invalid speed given in fixed-link node!");
@@ -38,12 +48,9 @@ int fixedphy_probe(struct phy_device *phydev)
 	phydev->priv = priv;
 
 	priv->link_speed = val;
-	priv->duplex = fdtdec_get_bool(gd->fdt_blob, ofnode, "full-duplex");
-	priv->pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "pause");
-	priv->asym_pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "asym-pause");
-
-	/* fixed-link phy must not be reset by core phy code */
-	phydev->flags |= PHY_FLAG_BROKEN_RESET;
+	priv->duplex = ofnode_read_bool(node, "full-duplex");
+	priv->pause = ofnode_read_bool(node, "pause");
+	priv->asym_pause = ofnode_read_bool(node, "asym-pause");
 
 	return 0;
 }
@@ -72,6 +79,7 @@ static struct phy_driver fixedphy_driver = {
 	.name		= "Fixed PHY",
 	.features	= PHY_GBIT_FEATURES | SUPPORTED_MII,
 	.probe		= fixedphy_probe,
+	.config		= fixedphy_config,
 	.startup	= fixedphy_startup,
 	.shutdown	= fixedphy_shutdown,
 };
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 89e3076bfd..2feb559bba 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -988,6 +988,7 @@ static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
 struct phy_device *fixed_phy_create(ofnode node)
 {
 	phy_interface_t interface = PHY_INTERFACE_MODE_NONE;
+	struct phy_device *phydev;
 	const char *if_str;
 	ofnode subnode;
 
@@ -1004,8 +1005,11 @@ struct phy_device *fixed_phy_create(ofnode node)
 		return NULL;
 	}
 
-	return phy_device_create(NULL, ofnode_to_offset(subnode), PHY_FIXED_ID,
-				 false, interface);
+	phydev = phy_device_create(NULL, 0, PHY_FIXED_ID, false, interface);
+	if (phydev)
+		phydev->node = subnode;
+
+	return phydev;
 }
 
 #ifdef CONFIG_DM_ETH
@@ -1018,20 +1022,16 @@ static struct phy_device *phy_connect_fixed(struct mii_dev *bus,
 					    phy_interface_t interface)
 #endif
 {
-	struct phy_device *phydev = NULL;
-	int sn;
-	const char *name;
+	ofnode node = dev_ofnode(dev), subnode;
+	struct phy_device *phydev;
 
-	sn = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev));
-	while (sn > 0) {
-		name = fdt_get_name(gd->fdt_blob, sn, NULL);
-		if (name && strcmp(name, "fixed-link") == 0) {
-			phydev = phy_device_create(bus, sn, PHY_FIXED_ID, false,
-						   interface);
-			break;
-		}
-		sn = fdt_next_subnode(gd->fdt_blob, sn);
-	}
+	subnode = ofnode_find_subnode(node, "fixed-link");
+	if (!ofnode_valid(subnode))
+		return NULL;
+
+	phydev = phy_device_create(bus, 0, PHY_FIXED_ID, false, interface);
+	if (phydev)
+		phydev->node = subnode;
 
 	return phydev;
 }
diff --git a/net/mdio-uclass.c b/net/mdio-uclass.c
index 2a9533c88b..1b687765b8 100644
--- a/net/mdio-uclass.c
+++ b/net/mdio-uclass.c
@@ -138,11 +138,13 @@ static struct phy_device *dm_eth_connect_phy_handle(struct udevice *ethdev,
 	struct udevice *mdiodev;
 	struct phy_device *phy;
 	struct ofnode_phandle_args phandle = {.node = ofnode_null()};
+	ofnode phynode;
 	int i;
 
 	if (CONFIG_IS_ENABLED(PHY_FIXED) &&
-	    ofnode_phy_is_fixed_link(dev_ofnode(ethdev), NULL)) {
-		phy = phy_connect(NULL, -1, ethdev, interface);
+	    ofnode_phy_is_fixed_link(dev_ofnode(ethdev), &phynode)) {
+		phy = phy_connect(NULL, 0, ethdev, interface);
+		phandle.node = phynode;
 		goto out;
 	}
 
-- 
2.25.1

  parent reply	other threads:[~2021-03-12 13:35 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12 13:35 [PATCH v2 00/21] ppc: qemu: Add eTSEC support Bin Meng
2021-03-12 13:35 ` [PATCH v2 01/21] dt-bindings: net: Add the old DT bindings for "fixed-link" Bin Meng
2021-03-13 12:10   ` Vladimir Oltean
2021-03-13 12:59   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 02/21] of: extra: Introduce ofnode_phy_is_fixed_link() API Bin Meng
2021-03-13 12:14   ` Vladimir Oltean
2021-03-13 12:29     ` Vladimir Oltean
2021-03-13 14:34       ` Bin Meng
2021-03-13 13:03   ` Vladimir Oltean
2021-03-13 14:32     ` Bin Meng
2021-03-12 13:35 ` [PATCH v2 03/21] test: dm: Add a case to test ofnode_phy_is_fixed_link() Bin Meng
2021-03-13 13:13   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 04/21] dm: mdio: Use ofnode_phy_is_fixed_link() API Bin Meng
2021-03-13 13:13   ` Vladimir Oltean
2021-03-12 13:35 ` Bin Meng [this message]
2021-03-13 13:15   ` [PATCH v2 05/21] net: phy: fixed: Be compatible with live OF tree Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 06/21] net: phy: fixed: Drop #ifdef CONFIG_DM_ETH around phy_connect_fixed Bin Meng
2021-03-13 13:15   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 07/21] net: phy: xilinx: Be compatible with live OF tree Bin Meng
2021-03-12 14:11   ` Michal Simek
2021-03-12 13:35 ` [PATCH v2 08/21] net: phy: xilinx: Drop #ifdef CONFIG_DM_ETH around phy_connect_gmii2rgmii() Bin Meng
2021-03-13 13:16   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 09/21] net: phy: Simplify the logic of phy_connect_fixed() Bin Meng
2021-03-13 13:17   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 10/21] net: phy: fixed: Make driver ops static Bin Meng
2021-03-13 13:17   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 11/21] net: phy: fixed: Add the missing ending newline Bin Meng
2021-03-13 13:18   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 12/21] net: phy: fixed: Support the old DT binding Bin Meng
2021-03-13 13:19   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 13/21] net: tsec: Use dm_eth_phy_connect() directly for the DM case Bin Meng
2021-03-13 13:20   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 14/21] sandbox: Add a DSA sandbox driver and unit test Bin Meng
2021-03-12 13:35 ` [PATCH v2 15/21] dt-bindings: net: Update Freescale TSEC to support "queue-group" Bin Meng
2021-03-13 12:50   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 16/21] net: tsec: Support <reg> property from the subnode "queue-group" Bin Meng
2021-03-13 13:28   ` Vladimir Oltean
2021-03-12 13:35 ` [PATCH v2 17/21] dm: core: Correctly read <ranges> of simple-bus Bin Meng
2021-03-12 15:47   ` Simon Glass
2021-03-12 13:35 ` [PATCH v2 18/21] test: dm: Add a test case for simple-bus <ranges> Bin Meng
2021-03-12 13:36 ` [PATCH v2 19/21] ppc: qemu: Create a virtual memory mapping of the platform bus Bin Meng
2021-03-13 13:48   ` Vladimir Oltean
2021-03-12 13:36 ` [PATCH v2 20/21] ppc: qemu: Enable eTSEC support Bin Meng
2021-03-13 13:49   ` Vladimir Oltean
2021-03-12 13:36 ` [PATCH v2 21/21] doc: board: qemu-ppce500: Document eTSEC usage Bin Meng
2021-03-13 13:50   ` Vladimir Oltean
2021-03-12 15:12 ` [PATCH v2 00/21] ppc: qemu: Add eTSEC support Bin Meng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210312133602.31105-6-bmeng.cn@gmail.com \
    --to=bmeng.cn@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox