From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [PATCH v3 8/8] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
Date: Tue, 16 Mar 2021 21:52:07 +0530 [thread overview]
Message-ID: <20210316162207.35641-9-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20210316162207.35641-1-jagan@amarulasolutions.com>
7" OF is a capacitive touch 7" Open Frame panel solutions with
- 7" AUO B101AW03 LVDS panel
- EDT, FT5526 Touch
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.
MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Linux dts commit details:
commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 7" OF")
Add support for it.
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- collect Patrice r-b
Changes for v2:
- collect Patrice r-b
- add linux dts commit
- drop CONFIG_BOARD_EARLY_INIT_F
arch/arm/dts/Makefile | 1 +
...rogea-stm32mp1-microdev2.0-of7-u-boot.dtsi | 51 ++++++
...157a-microgea-stm32mp1-microdev2.0-of7.dts | 154 ++++++++++++++++++
arch/arm/mach-stm32mp/Kconfig | 7 +
board/engicam/stm32mp1/MAINTAINERS | 6 +
...-microgea-stm32mp1-microdev2-of7_defconfig | 79 +++++++++
6 files changed, 298 insertions(+)
create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
create mode 100644 configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 64d73b96ef..43c604f2f8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -993,6 +993,7 @@ dtb-$(CONFIG_STM32MP15x) += \
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb \
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
new file mode 100644
index 0000000000..e4bd215812
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-microgea-stm32mp1-u-boot.dtsi"
+
+/{
+ aliases {
+ mmc0 = &sdmmc1;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+};
+
+&sdmmc1 {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&uart4 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
new file mode 100644
index 0000000000..674b2d330d
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7\" Open Frame";
+ compatible = "engicam,microgea-stm32mp1-microdev2.0-of7",
+ "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &uart8;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+ lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ power-supply = <&panel_pwr>;
+ };
+
+ panel_pwr: regulator-panel-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ };
+
+ panel {
+ compatible = "auo,b101aw03";
+ backlight = <&backlight>;
+ enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
+ power-supply = <&lcd_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <<dc_ep0_out>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ i2c-scl-falling-time-ns = <20>;
+ i2c-scl-rising-time-ns = <185>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_pins_a>;
+ pinctrl-1 = <&i2c2_sleep_pins_a>;
+ status = "okay";
+};
+
+<dc {
+ pinctrl-names = "default";
+ pinctrl-0 = <<dc_pins>;
+ status = "okay";
+
+ port {
+ ltdc_ep0_out: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pinctrl {
+ ltdc_pins: ltdc {
+ pins {
+ pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */
+ <STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */
+ <STM32_PINMUX('H', 11, AF14)>, /* LTDC_R5 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+ <STM32_PINMUX('D', 9, AF14)>, /* LTDC_B0 */
+ <STM32_PINMUX('E', 5, AF14)>, /* LTDC_G0 */
+ <STM32_PINMUX('E', 6, AF14)>, /* LTDC_G1 */
+ <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
+ <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+ <STM32_PINMUX('G', 7, AF14)>, /* LTDC_CLK */
+ <STM32_PINMUX('G', 12, AF14)>, /* LTDC_B1 */
+ <STM32_PINMUX('H', 2, AF14)>, /* LTDC_R0 */
+ <STM32_PINMUX('H', 3, AF14)>, /* LTDC_R1 */
+ <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */
+ <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */
+ <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+ <STM32_PINMUX('H', 14, AF14)>, /* LTDC_G3 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
+ <STM32_PINMUX('I', 0, AF14)>, /* LTDC_G5 */
+ <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */
+ <STM32_PINMUX('I', 2, AF14)>, /* LTDC_G7 */
+ <STM32_PINMUX('I', 4, AF14)>, /* LTDC_B4 */
+ <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */
+ <STM32_PINMUX('B', 8, AF14)>, /* LTDC_B6 */
+ <STM32_PINMUX('I', 7, AF14)>, /* LTDC_B7 */
+ <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */
+ <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ disable-wp;
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ st,neg-edge;
+ vmmc-supply = <&vdd>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index abfe835158..ee48a7070d 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -97,6 +97,13 @@ config TARGET_MICROGEA_STM32MP1
* MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
+ MicroGEA STM32MP1 MicroDev 2.0 7" OF:
+ * 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
+ panel and toucscreen.
+ * MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
+ pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
+ Open Frame Solution board.
+
config TARGET_ICORE_STM32MP1
bool "Engicam i.Core STM32MP1 SOM"
select STM32MP15x
diff --git a/board/engicam/stm32mp1/MAINTAINERS b/board/engicam/stm32mp1/MAINTAINERS
index 40220e7ce6..405ff99185 100644
--- a/board/engicam/stm32mp1/MAINTAINERS
+++ b/board/engicam/stm32mp1/MAINTAINERS
@@ -5,6 +5,12 @@ S: Maintained
F: arch/arm/dts/stm32mp15*microgea*
F: configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
+MicroGEA-STM32MP1-MICRODEV2.0-OF7
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Matteo Lisi <matteo.lisi@engicam.com>
+S: Maintained
+F: configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
+
i.Core-STM32MP1-CTOUCH2.0
M: Jagan Teki <jagan@amarulasolutions.com>
M: Matteo Lisi <matteo.lisi@engicam.com>
diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
new file mode 100644
index 0000000000..c0c7ff11c8
--- /dev/null
+++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
@@ -0,0 +1,79 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_SYS_MALLOC_F_LEN=0x3000
+CONFIG_SYS_MEMTEST_START=0xc0000000
+CONFIG_SYS_MEMTEST_END=0xc4000000
+CONFIG_ENV_OFFSET=0x280000
+CONFIG_SPL_TEXT_BASE=0x2FFC2500
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_TARGET_MICROGEA_STM32MP1=y
+CONFIG_ENV_OFFSET_REDUND=0x2C0000
+# CONFIG_ARMV7_VIRT is not set
+CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-microgea-stm32mp1-microdev2.0-of7"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SYS_PROMPT="STM32MP> "
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_SPL_ENV_IS_NOWHERE is not set
+CONFIG_DM_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_STM32_IPCC=y
+CONFIG_STM32_FMC2_EBI=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_STM32_SDMMC2=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_PHY=y
+CONFIG_PINCONF=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_PINCTRL_STMFX=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_PMIC_STPMIC1=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_REMOTEPROC_STM32_COPRO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_STM32=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_WDT=y
+CONFIG_WDT_STM32MP=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
--
2.25.1
next prev parent reply other threads:[~2021-03-16 16:22 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 16:21 [PATCH v3 0/8] stm32: Add Engicam STM32MP1 SoM Jagan Teki
2021-03-16 16:22 ` [PATCH v3 1/8] ARM: dts: stm32: Add Engicam i.Core " Jagan Teki
2021-04-09 9:54 ` Patrice CHOTARD
2021-03-16 16:22 ` [PATCH v3 2/8] ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3 Jagan Teki
2021-04-09 9:54 ` Patrice CHOTARD
2021-03-16 16:22 ` [PATCH v3 3/8] ARM: stm32: Imply SPL_SPI_LOAD Jagan Teki
2021-04-09 9:54 ` Patrice CHOTARD
2021-03-16 16:22 ` [PATCH v3 4/8] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit Jagan Teki
2021-04-09 9:54 ` Patrice CHOTARD
2021-03-16 16:22 ` [PATCH v3 5/8] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 Jagan Teki
2021-04-09 9:55 ` Patrice CHOTARD
2021-03-16 16:22 ` [PATCH v3 6/8] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM Jagan Teki
2021-04-09 9:55 ` Patrice CHOTARD
2021-03-16 16:22 ` [PATCH v3 7/8] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board Jagan Teki
2021-04-09 9:55 ` Patrice CHOTARD
2021-03-16 16:22 ` Jagan Teki [this message]
2021-04-09 9:55 ` [PATCH v3 8/8] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316162207.35641-9-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox