From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Sun, 28 Mar 2021 21:59:21 -0400 Subject: [PATCH V2] spi: Update speed/mode on change In-Reply-To: References: <20210226142124.56305-1-marex@denx.de> <20210328213055.GB1310@bill-the-cat> Message-ID: <20210329015921.GF1310@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Mar 29, 2021 at 03:32:51AM +0200, Marek Vasut wrote: > On 3/28/21 11:30 PM, Tom Rini wrote: > > On Fri, Feb 26, 2021 at 03:21:24PM +0100, Marek Vasut wrote: > > > > > The spi_get_bus_and_cs() may be called on the same bus and chipselect > > > with different frequency or mode. This is valid usecase, but the code > > > fails to notify the controller of such a configuration change. Call > > > spi_set_speed_mode() in case bus frequency or bus mode changed to let > > > the controller update the configuration. > > > > > > The problem can easily be triggered using the sspi command: > > > => sspi 0:0 at 1000 > > > => sspi 0:0 at 2000 > > > Without this patch, both transfers happen at 1000 Hz. With this patch, > > > the later transfer happens correctly at 2000 Hz. > > > > > > Signed-off-by: Marek Vasut > > > Cc: Jagan Teki > > > Cc: Patrick Delaunay > > > > So, very reliably I can make: > > https://source.denx.de/u-boot/u-boot/-/jobs/245517 > > happen locally as well building with clang. It's not obvious to me why > > the test now fails however. > > Can you please be more specific / clear ? I have no idea what those 300 > lines of cryptic output mean, nor what are you trying to say by the above, > sorry. If you build with clang, for sandbox, and run the tests, U-Boot crashes in the unit tests that you start with "ut dm". -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: