From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Date: Mon, 5 Apr 2021 15:58:36 +0530 Subject: [PATCH v2 17/17] configs: j7200_evm_a72: Enhance bootcmd to configure ethernet PHY In-Reply-To: <20210405102836.24515-1-kishon@ti.com> References: <20210405102836.24515-1-kishon@ti.com> Message-ID: <20210405102836.24515-18-kishon@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Update the default BOOTCOMMAND to provide an automatic and easier way to configure ethernet PHY before loading the firmware. Signed-off-by: Kishon Vijay Abraham I --- configs/j7200_evm_a72_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index bf78b36d22..5929bba82a 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -30,7 +30,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" +CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" CONFIG_LOGLEVEL=7 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -- 2.17.1