From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH v1 00/15] mips: octeon: MIPS Octeon misc updates: NIC23, AHCI, serial-remote tools etc
Date: Wed, 7 Apr 2021 09:12:26 +0200 [thread overview]
Message-ID: <20210407071241.536752-1-sr@denx.de> (raw)
This patchset adds the following updates / fixes for Marvell MIPS Octeon:
- MIPS Octeon NIC23 base support
- Add serial_octeon_pcie_console to support the Marvell remote tool
"oct-remote-console"
- Add serial_octeon_bootcmd to support the Marvell remote tools
"oct-remote-load" & "oct-remote-bootcmd"
- Fix AHCI driver to support big-endian platforms
- Misc minor updates & fixes to the MIPS Octeon platform code
- EBB7304: Enable USB storage support
- EBB7304: Add I2C support (devices & commands)
This patchset requires the MIPS Octeon serdes & PCIe patchset which was
posted to the list 2020-12-11.
Thanks,
Stefan
Aaron Williams (2):
mips: octeon: dts/dtsi: Change UART DT node to use clocks property
mips: octeon: ebb7304: Add support for some I2C devices
Stefan Roese (13):
mips: octeon: Move CVMX_SYNC from octeon_ddr.h to cvmx-regs.h
mips: octeon: cvmx-bootmem: Fix compare in "if" statement
mips: octeon: cvmx-coremask.h: Fix cvmx_coremask_dprint() with DEBUG
defined
serial: serial_octeon_pcie_console.c: Add PCI remote console support
serial: serial_octeon_bootcmd.c: Add PCI remote console support
mips: octeon: cpu.c: Add arch_misc_init() for pci-console &
pci-bootcmd
mips: octeon: cpu.c: Enable AHCI/SATA support
sata: ahci_mvebu.c: Enable AHCI/SATA driver for MIPS Octeon
ata: ahci: Fix usage on big-endian platforms
scsi: Add ata_swap_buf_le16() to support big-endian platforms
mips: octeon: mrvl,cn73xx.dtsi: Add AHCI/SATA DT node
mips: octeon: Add Octeon III NIC23 board support
mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support
arch/mips/dts/Makefile | 1 +
arch/mips/dts/mrvl,cn73xx.dtsi | 21 +
arch/mips/dts/mrvl,octeon-ebb7304.dts | 15 +-
arch/mips/dts/mrvl,octeon-nic23.dts | 162 ++++++++
arch/mips/mach-octeon/Kconfig | 7 +
arch/mips/mach-octeon/cpu.c | 348 ++++++++++++++++-
arch/mips/mach-octeon/cvmx-bootmem.c | 4 +-
.../mach-octeon/include/mach/cvmx-coremask.h | 5 +-
.../mips/mach-octeon/include/mach/cvmx-regs.h | 1 +
.../mach-octeon/include/mach/octeon_ddr.h | 2 -
board/Marvell/octeon_nic23/Kconfig | 19 +
board/Marvell/octeon_nic23/MAINTAINERS | 7 +
board/Marvell/octeon_nic23/Makefile | 8 +
board/Marvell/octeon_nic23/board.c | 106 +++++
board/Marvell/octeon_nic23/board_ddr.h | 269 +++++++++++++
configs/octeon_ebb7304_defconfig | 9 +-
configs/octeon_nic23_defconfig | 70 ++++
drivers/ata/Kconfig | 2 +-
drivers/ata/ahci.c | 23 +-
drivers/ata/ahci_mvebu.c | 3 +-
drivers/scsi/scsi.c | 6 +
drivers/serial/Kconfig | 24 ++
drivers/serial/Makefile | 2 +
drivers/serial/serial_octeon_bootcmd.c | 182 +++++++++
drivers/serial/serial_octeon_pcie_console.c | 365 ++++++++++++++++++
include/configs/octeon_nic23.h | 21 +
26 files changed, 1656 insertions(+), 26 deletions(-)
create mode 100644 arch/mips/dts/mrvl,octeon-nic23.dts
create mode 100644 board/Marvell/octeon_nic23/Kconfig
create mode 100644 board/Marvell/octeon_nic23/MAINTAINERS
create mode 100644 board/Marvell/octeon_nic23/Makefile
create mode 100644 board/Marvell/octeon_nic23/board.c
create mode 100644 board/Marvell/octeon_nic23/board_ddr.h
create mode 100644 configs/octeon_nic23_defconfig
create mode 100644 drivers/serial/serial_octeon_bootcmd.c
create mode 100644 drivers/serial/serial_octeon_pcie_console.c
create mode 100644 include/configs/octeon_nic23.h
--
2.31.1
next reply other threads:[~2021-04-07 7:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-07 7:12 Stefan Roese [this message]
2021-04-07 7:12 ` [PATCH v1 01/15] mips: octeon: Move CVMX_SYNC from octeon_ddr.h to cvmx-regs.h Stefan Roese
2021-04-07 7:12 ` [PATCH v1 02/15] mips: octeon: cvmx-bootmem: Fix compare in "if" statement Stefan Roese
2021-04-07 7:12 ` [PATCH v1 03/15] mips: octeon: cvmx-coremask.h: Fix cvmx_coremask_dprint() with DEBUG defined Stefan Roese
2021-04-07 7:12 ` [PATCH v1 04/15] serial: serial_octeon_pcie_console.c: Add PCI remote console support Stefan Roese
2021-04-07 7:12 ` [PATCH v1 05/15] serial: serial_octeon_bootcmd.c: " Stefan Roese
2021-04-07 7:12 ` [PATCH v1 06/15] mips: octeon: cpu.c: Add arch_misc_init() for pci-console & pci-bootcmd Stefan Roese
2021-04-07 7:12 ` [PATCH v1 07/15] mips: octeon: cpu.c: Enable AHCI/SATA support Stefan Roese
2021-04-07 7:12 ` [PATCH v1 08/15] sata: ahci_mvebu.c: Enable AHCI/SATA driver for MIPS Octeon Stefan Roese
2021-04-07 7:12 ` [PATCH v1 09/15] ata: ahci: Fix usage on big-endian platforms Stefan Roese
2021-04-07 7:12 ` [PATCH v1 10/15] scsi: Add ata_swap_buf_le16() to support " Stefan Roese
2021-04-07 7:12 ` [PATCH v1 11/15] mips: octeon: mrvl, cn73xx.dtsi: Add AHCI/SATA DT node Stefan Roese
2021-04-07 7:12 ` [PATCH v1 12/15] mips: octeon: Add Octeon III NIC23 board support Stefan Roese
2021-04-07 7:12 ` [PATCH v1 13/15] mips: octeon: dts/dtsi: Change UART DT node to use clocks property Stefan Roese
2021-04-07 7:12 ` [PATCH v1 14/15] mips: octeon: ebb7304: Add support for some I2C devices Stefan Roese
2021-04-07 7:12 ` [PATCH v1 15/15] mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support Stefan Roese
2021-04-24 22:49 ` [PATCH v1 00/15] mips: octeon: MIPS Octeon misc updates: NIC23, AHCI, serial-remote tools etc Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210407071241.536752-1-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox