From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH v1 08/15] sata: ahci_mvebu.c: Enable AHCI/SATA driver for MIPS Octeon
Date: Wed, 7 Apr 2021 09:12:34 +0200 [thread overview]
Message-ID: <20210407071241.536752-9-sr@denx.de> (raw)
In-Reply-To: <20210407071241.536752-1-sr@denx.de>
This patch enables the usage of the MVEBU AHCI/SATA driver. The only
changes necessary to support MIPS Octeon via DT based probing are, to
add the compatible DT property and the use of dev_remap_addr() so that
the correct mapped address is used in the Octeon case (phys != virt).
Please note that this driver supports the usage of the "scsi" command
and not the "sata" command, since it does not provide an own "scan"
function, which is needed for the "sata" cmd support.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
drivers/ata/Kconfig | 2 +-
drivers/ata/ahci_mvebu.c | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index f2f8275aeca8..6e47964cdc8f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -121,7 +121,7 @@ config SUNXI_AHCI
config AHCI_MVEBU
bool "Marvell EBU AHCI SATA support"
- depends on ARCH_MVEBU
+ depends on ARCH_MVEBU || ARCH_OCTEON
depends on AHCI
select SCSI_AHCI
select DM_SCSI
diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
index 7d82d2ea3fff..f05150d61ddf 100644
--- a/drivers/ata/ahci_mvebu.c
+++ b/drivers/ata/ahci_mvebu.c
@@ -39,7 +39,7 @@ static int mvebu_ahci_probe(struct udevice *dev)
*/
board_ahci_enable();
- ahci_probe_scsi(dev, dev_read_addr(dev));
+ ahci_probe_scsi(dev, (ulong)dev_remap_addr(dev));
return 0;
}
@@ -48,6 +48,7 @@ static const struct udevice_id mvebu_ahci_ids[] = {
{ .compatible = "marvell,armada-380-ahci" },
{ .compatible = "marvell,armada-3700-ahci" },
{ .compatible = "marvell,armada-8k-ahci" },
+ { .compatible = "cavium,octeon-7130-ahci" },
{ }
};
--
2.31.1
next prev parent reply other threads:[~2021-04-07 7:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-07 7:12 [PATCH v1 00/15] mips: octeon: MIPS Octeon misc updates: NIC23, AHCI, serial-remote tools etc Stefan Roese
2021-04-07 7:12 ` [PATCH v1 01/15] mips: octeon: Move CVMX_SYNC from octeon_ddr.h to cvmx-regs.h Stefan Roese
2021-04-07 7:12 ` [PATCH v1 02/15] mips: octeon: cvmx-bootmem: Fix compare in "if" statement Stefan Roese
2021-04-07 7:12 ` [PATCH v1 03/15] mips: octeon: cvmx-coremask.h: Fix cvmx_coremask_dprint() with DEBUG defined Stefan Roese
2021-04-07 7:12 ` [PATCH v1 04/15] serial: serial_octeon_pcie_console.c: Add PCI remote console support Stefan Roese
2021-04-07 7:12 ` [PATCH v1 05/15] serial: serial_octeon_bootcmd.c: " Stefan Roese
2021-04-07 7:12 ` [PATCH v1 06/15] mips: octeon: cpu.c: Add arch_misc_init() for pci-console & pci-bootcmd Stefan Roese
2021-04-07 7:12 ` [PATCH v1 07/15] mips: octeon: cpu.c: Enable AHCI/SATA support Stefan Roese
2021-04-07 7:12 ` Stefan Roese [this message]
2021-04-07 7:12 ` [PATCH v1 09/15] ata: ahci: Fix usage on big-endian platforms Stefan Roese
2021-04-07 7:12 ` [PATCH v1 10/15] scsi: Add ata_swap_buf_le16() to support " Stefan Roese
2021-04-07 7:12 ` [PATCH v1 11/15] mips: octeon: mrvl, cn73xx.dtsi: Add AHCI/SATA DT node Stefan Roese
2021-04-07 7:12 ` [PATCH v1 12/15] mips: octeon: Add Octeon III NIC23 board support Stefan Roese
2021-04-07 7:12 ` [PATCH v1 13/15] mips: octeon: dts/dtsi: Change UART DT node to use clocks property Stefan Roese
2021-04-07 7:12 ` [PATCH v1 14/15] mips: octeon: ebb7304: Add support for some I2C devices Stefan Roese
2021-04-07 7:12 ` [PATCH v1 15/15] mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support Stefan Roese
2021-04-24 22:49 ` [PATCH v1 00/15] mips: octeon: MIPS Octeon misc updates: NIC23, AHCI, serial-remote tools etc Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210407071241.536752-9-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox