From mboxrd@z Thu Jan  1 00:00:00 1970
From: stefano.babic at babic.homelinux.org <stefano.babic@babic.homelinux.org>
Date: Sun,  2 May 2021 13:42:09 +0200 (CEST)
Subject: [PATCH] ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM
In-Reply-To: <20210423074552.2451202-1-iliev@ronetix.at>
Message-ID: <20210502114209.CE72A81CD1@phobos.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Supported peripherals: Ethernet, eMMC, Serial.
> U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14
> +0200)
> Normal Boot
> Trying to boot from MMC2
> U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200)
> CPU:   Freescale i.MX8MQ rev2.1 at 1000 MHz
> Reset cause: POR
> Model: Ronetix iMX8M-CM SoM
> DRAM:  1 GiB
> WDT:   Started with servicing (60s timeout)
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... OK
> In:    serial
> Out:   serial
> Err:   serial
> Net:
> Warning: ethernet at 30be0000 (eth0) using random MAC address -
> 42:0d:e7:78:da:53
> eth0: ethernet at 30be0000
> Hit any key to stop autoboot:  0
> u-boot=>
> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================