From mboxrd@z Thu Jan  1 00:00:00 1970
From: stefano.babic at babic.homelinux.org <stefano.babic@babic.homelinux.org>
Date: Sun,  2 May 2021 13:42:49 +0200 (CEST)
Subject: [PATCH] imx: imx8: Update README with somewhat correct firmware
 versions
In-Reply-To: <20210308151912.141928-1-plaes@plaes.org>
Message-ID: <20210502114249.89094803AB@phobos.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> From: Priit Laes <priit.laes@paf.com>
> Current setup instructions for i.MX8QM MEK board include somewhat
> conflicting instructions, so here's an attempt to fix it.
> After trying both sets of firmwares, I can conclude that both of
> them fail to work:
> - no boot at all with imx-sc-firmware-0.7 / firmware-imx-7.6
> - partial success with imx-sc-firmware-1.1 / firmware-imx-8.0:
> U-Boot 2021.04-rc3-00135-ge0669a43c8 (Mar 08 2021 - 16:49:08 +0200)
> CPU:   NXP i.MX8QM RevB A53 at 1200 MHz
> Model: Freescale i.MX8QM MEK
> Board: iMX8QM MEK
> mu_hal_receivemsg timeout
> Build: SCFW 65afe5f6, SECO-FW 65afe5f6, ATF a-20190
> mu_hal_receivemsg timeout
> sc_misc_get_boot_dev: res:16
> Boot:  SD0
> DRAM:  mu_hal_sendmsg timeout
> sc_rm_is_memreg_owned: mr:0 res:21
> ...
> Signed-off-by: Priit Laes <priit.laes@paf.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================