From mboxrd@z Thu Jan  1 00:00:00 1970
From: stefano.babic at babic.homelinux.org <stefano.babic@babic.homelinux.org>
Date: Sun,  2 May 2021 13:42:56 +0200 (CEST)
Subject: [PATCH v3 3/4] board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2
 Starter Kit
In-Reply-To: <20210426125349.6416-4-jagan@amarulasolutions.com>
Message-ID: <20210502114257.00CF2824AD@phobos.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
> Evaluation Board.
> Genaral features:
> - LCD 7" C.Touch
> - microSD slot
> - Ethernet 1Gb
> - Wifi/BT
> - 2x LVDS Full HD interfaces
> - 3x USB 2.0
> - 1x USB 3.0
> - HDMI Out
> - Mini PCIe
> - MIPI CSI
> - 2x CAN
> - Audio Out
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
> i.Core MX8M Mini needs to mount on top of this Evaluation board for
> creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
> Linux dts commit details:
> commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini
> EDIMM2.2 Starter Kit")
> Add support for it.
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================