From mboxrd@z Thu Jan  1 00:00:00 1970
From: stefano.babic at babic.homelinux.org <stefano.babic@babic.homelinux.org>
Date: Sun,  2 May 2021 13:43:08 +0200 (CEST)
Subject: [PATCH v3] imx: Add support for Ronetix's iMX7-CM board
In-Reply-To: <20210416134813.1084842-1-iliev@ronetix.at>
Message-ID: <20210502114308.CFB34824AD@phobos.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Console boot log:
> U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)
> Trying to boot from MMC1
> U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)
> CPU:   Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz)
> CPU:   Commercial temperature grade (0C to 95C) at 44C
> Reset cause: POR
> Model: Ronetix iMX7-CM Board
> Board: iMX7-CM
> DRAM:  512 MiB
> PMIC:  PFUZE3000 DEV_ID=0x30 REV_ID=0x11
> MMC:   FSL_SDHC: 0, FSL_SDHC: 2
> Loading Environment from MMC... OK
> In:    serial
> Out:   serial
> Err:   serial
> Net:
> Warning: ethernet at 30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f
> eth0: ethernet at 30be0000
> Hit any key to stop autoboot:  0
> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================