From: Kishon Vijay Abraham I <kishon@ti.com>
To: u-boot@lists.denx.de
Subject: [PATCH v3 14/20] arm: dts: k3-j7200-main: Add DT node for torrent serdes
Date: Tue, 4 May 2021 16:11:49 +0530 [thread overview]
Message-ID: <20210504104155.19222-15-kishon@ti.com> (raw)
In-Reply-To: <20210504104155.19222-1-kishon@ti.com>
From: Aswath Govindraju <a-govindraju@ti.com>
Add DT node for torrent serdes.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/dts/k3-j7200-main.dtsi | 63 +++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi
index 1131464075..138702cf9d 100644
--- a/arch/arm/dts/k3-j7200-main.dtsi
+++ b/arch/arm/dts/k3-j7200-main.dtsi
@@ -5,6 +5,13 @@
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
*/
+/ {
+ serdes_refclk: serdes-refclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+};
+
&cbass_main {
msmc_ram: sram at 70000000 {
compatible = "mmio-sram";
@@ -554,6 +561,62 @@
clock-names = "gpio";
};
+ serdes_wiz0: wiz at 5060000 {
+ compatible = "ti,j721e-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+ assigned-clocks = <&k3_clks 292 85>;
+ assigned-clock-parents = <&k3_clks 292 89>;
+
+ wiz0_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_pll0_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_pll1_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+ clock-output-names = "wiz0_refclk_dig";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 292 85>;
+ };
+
+ wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz0_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ serdes0: serdes at 5060000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05060000 0x00010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz0 0>;
+ reset-names = "torrent_reset";
+ clocks = <&wiz0_pll0_refclk>;
+ clock-names = "refclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
usbss0: cdns-usb at 4104000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4104000 0x00 0x100>;
--
2.17.1
next prev parent reply other threads:[~2021-05-04 10:41 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-04 10:41 [PATCH v3 00/20] TI/Cadence: Add Sierra/Torrent SERDES driver Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 01/20] dm: core: Add helper to compare node names Kishon Vijay Abraham I
2021-05-04 16:58 ` Simon Glass
2021-05-04 10:41 ` [PATCH v3 02/20] dm: test: Add test case to check node name ignoring unit address Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 03/20] drivers: reset: Handle gracefully NULL pointers Kishon Vijay Abraham I
2021-05-04 16:58 ` Simon Glass
2021-05-05 4:25 ` Kishon Vijay Abraham I
2021-05-05 23:37 ` Simon Glass
2021-05-06 13:09 ` Kishon Vijay Abraham I
2021-05-06 15:06 ` Simon Glass
2021-05-04 10:41 ` [PATCH v3 04/20] dt-bindings: phy: Add definitions for additional phy types Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 05/20] dt-bindings: phy: Add defines for AM64 SERDES Wrapper Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 06/20] dt-bindings: phy: cadence-torrent: Add defines for refclk driver Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 07/20] dt-bindings: ti-serdes-mux: Add defines for AM64 SoC Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 08/20] phy: cadence: Add driver for Sierra PHY Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 09/20] phy: cadence: Add driver for Torrent SERDES Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 10/20] phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 11/20] usb: cdns3: cdns3-ti: Fix clk_get_by_name() to get the correct name Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 12/20] board: ti: j721e: Add support for probing and configuring Torrent serdes on J7200 Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 13/20] ARM: dts: k3-j721e: Add the entries required for USB3 support on USB0 Kishon Vijay Abraham I
2021-05-07 17:14 ` Tom Rini
2021-07-09 14:06 ` Kishon Vijay Abraham I
2021-07-09 14:16 ` Tom Rini
2021-05-04 10:41 ` Kishon Vijay Abraham I [this message]
2021-05-04 10:41 ` [PATCH v3 15/20] arm: dts: k3-j7200-common-proc-board: Enable SERDES DT Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 16/20] arm: dts: k3-j7200-common-proc-board-u-boot: Add u-boot tags for torrent serdes Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 17/20] configs: j721e_evm_a72: Enable the drivers required for the USB3 support Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 18/20] configs: j7200_evm_a72_defconfig: Add config for torrent serdes and common clock framework Kishon Vijay Abraham I
2021-05-04 10:41 ` [PATCH v3 19/20] env: ti: j721e-evm: Add env variable to power on & reset QSGMII PHY in J7200 EVM Kishon Vijay Abraham I
2021-05-07 17:14 ` Tom Rini
2021-05-11 13:58 ` Kishon Vijay Abraham I
2021-05-11 14:33 ` Tom Rini
2021-07-09 14:32 ` Kishon Vijay Abraham I
2021-07-09 14:36 ` Tom Rini
2021-05-04 10:41 ` [PATCH v3 20/20] configs: j7200_evm_a72: Enhance bootcmd to configure ethernet PHY Kishon Vijay Abraham I
2021-05-07 17:16 ` [PATCH v3 00/20] TI/Cadence: Add Sierra/Torrent SERDES driver Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210504104155.19222-15-kishon@ti.com \
--to=kishon@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox