From: Tero Kristo <kristo@kernel.org>
To: u-boot@lists.denx.de
Subject: [PATCHv3 24/26] configs: j7200_evm_r5: Enable raw access power management features
Date: Wed, 5 May 2021 20:55:38 +0300 [thread overview]
Message-ID: <20210505175540.15006-25-kristo@kernel.org> (raw)
In-Reply-To: <20210505175540.15006-1-kristo@kernel.org>
From: Dave Gerlach <d-gerlach@ti.com>
Sysfw is not going to provide access to power management features in the
new architecture, so SPL must implement these itself. Enable all the raw
register access based clock + power domain drivers.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
---
configs/j7200_evm_r5_defconfig | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index b20698fd0e..97eb1b3c9a 100644
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -75,7 +75,7 @@ CONFIG_SPL_SYSCON=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
-CONFIG_CLK_TI_SCI=y
+# CONFIG_CLK_TI_SCI is not set
CONFIG_DMA_CHANNELS=y
CONFIG_TI_K3_NAVSS_UDMA=y
CONFIG_TI_SCI_PROTOCOL=y
@@ -111,7 +111,7 @@ CONFIG_SPL_PINCTRL=y
# CONFIG_SPL_PINCTRL_GENERIC is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_POWER_DOMAIN=y
-CONFIG_TI_SCI_POWER_DOMAIN=y
+# CONFIG_TI_SCI_POWER_DOMAIN is not set
CONFIG_K3_SYSTEM_CONTROLLER=y
CONFIG_REMOTEPROC_TI_K3_ARM64=y
CONFIG_DM_RESET=y
@@ -143,3 +143,13 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6164
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_FS_EXT4=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_TI_POWER_DOMAIN=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_LIB_RATIONAL=y
+CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_CLK_K3_PLL=y
+CONFIG_SPL_CLK_K3=y
+CONFIG_K3_DM_FW=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
--
2.17.1
next prev parent reply other threads:[~2021-05-05 17:55 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-05 17:55 [PATCHv3 00/26] J72xx: HSM rearch support series Tero Kristo
2021-05-05 17:55 ` [PATCHv3 01/26] lib: rational: copy the rational fraction lib routines from Linux Tero Kristo
2021-05-05 17:55 ` [PATCHv3 02/26] arm: mach-k3: introduce new config option for sysfw split Tero Kristo
2021-05-05 17:55 ` [PATCHv3 03/26] remoteproc: k3-r5: remove sysfw PM calls if not supported Tero Kristo
2021-05-05 17:55 ` [PATCHv3 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset Tero Kristo
2021-05-05 17:55 ` [PATCHv3 05/26] clk: fixed_rate: add API for directly registering fixed rate clocks Tero Kristo
2021-05-05 17:55 ` [PATCHv3 06/26] clk: fix clock tree dump to properly dump out every registered clock Tero Kristo
2021-05-05 17:55 ` [PATCHv3 07/26] clk: do not attempt to fetch clock pointer with null device Tero Kristo
2021-05-05 17:55 ` [PATCHv3 08/26] clk: add support for setting clk rate from cmdline Tero Kristo
2021-05-05 17:55 ` [PATCHv3 09/26] clk: sci-clk: fix return value of set_rate Tero Kristo
2021-05-05 17:55 ` [PATCHv3 10/26] clk: fix assigned-clocks to pass with deferring provider Tero Kristo
2021-05-05 17:55 ` [PATCHv3 11/26] clk: fix set_rate to clean up cached rates for the hierarchy Tero Kristo
2021-05-05 17:55 ` [PATCHv3 12/26] clk: add support for TI K3 SoC PLL Tero Kristo
2021-05-05 17:55 ` [PATCHv3 13/26] clk: add support for TI K3 SoC clocks Tero Kristo
2021-05-05 17:55 ` [PATCHv3 14/26] power: domain: Introduce driver for raw TI K3 PDs Tero Kristo
2021-05-07 0:03 ` Jaehoon Chung
2021-05-07 7:19 ` Tero Kristo
2021-05-05 17:55 ` [PATCHv3 15/26] cmd: ti: pd: Add debug command for K3 power domains Tero Kristo
2021-05-05 17:55 ` [PATCHv3 16/26] tools: k3_fit_atf: add DM binary to the FIT image Tero Kristo
2021-05-05 17:55 ` [PATCHv3 17/26] arm: mach-k3: Add platform data for j721e and j7200 Tero Kristo
2021-05-05 17:55 ` [PATCHv3 18/26] arm: mach-k3: add support for detecting firmware images from FIT Tero Kristo
2021-05-05 17:55 ` [PATCHv3 19/26] arm: mach-k3: do board config for PM and RM only if supported Tero Kristo
2021-05-09 5:54 ` Vignesh Raghavendra
2021-05-10 8:18 ` Tero Kristo
2021-05-10 8:25 ` Vignesh Raghavendra
2021-05-05 17:55 ` [PATCHv3 20/26] arm: mach-k3: common: Drop main r5 start Tero Kristo
2021-05-05 17:55 ` [PATCHv3 21/26] arm: mach-k3: sysfw-loader: pass boardcfg to sciserver Tero Kristo
2021-05-05 17:55 ` [PATCHv3 22/26] arm: mach-k3: j721e_init: Force early probe of clk-k3 driver Tero Kristo
2021-05-05 17:55 ` [PATCHv3 23/26] configs: j721e_evm_r5: Enable raw access power management features Tero Kristo
2021-05-05 17:55 ` Tero Kristo [this message]
2021-05-05 17:55 ` [PATCHv3 25/26] board: ti: j72xx: README: update build instructions and image formats Tero Kristo
2021-05-05 17:55 ` [PATCHv3 26/26] arm: dts: k3-j72xx: correct MCU timer1 frequency Tero Kristo
2021-05-05 18:00 ` [PATCHv3 00/26] J72xx: HSM rearch support series Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210505175540.15006-25-kristo@kernel.org \
--to=kristo@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox