From: Tero Kristo <kristo@kernel.org>
To: u-boot@lists.denx.de
Subject: [PATCHv4 21/26] arm: mach-k3: sysfw-loader: pass boardcfg to sciserver
Date: Tue, 11 May 2021 11:30:59 +0300 [thread overview]
Message-ID: <20210511083104.10868-22-kristo@kernel.org> (raw)
In-Reply-To: <20210511083104.10868-1-kristo@kernel.org>
From: Tero Kristo <t-kristo@ti.com>
Copy the contents of the board config loaded from sysfw.itb into an
EXTBOOT shared memory buffer that gets passed to sciserver. This only
needs to be done if EXTBOOT area has not been populated by ROM code yet.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
---
arch/arm/mach-k3/sysfw-loader.c | 103 ++++++++++++++++++++++++++++++++
1 file changed, 103 insertions(+)
diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c
index c6af205163..ac719cd46f 100644
--- a/arch/arm/mach-k3/sysfw-loader.c
+++ b/arch/arm/mach-k3/sysfw-loader.c
@@ -40,6 +40,46 @@ DECLARE_GLOBAL_DATA_PTR;
*/
#define K3_SYSTEM_CONTROLLER_RPROC_ID 0
+#define COMMON_HEADER_ADDRESS 0x41cffb00
+#define BOARDCFG_ADDRESS 0x41c80000
+
+#define COMP_TYPE_SBL_DATA 0x11
+#define DESC_TYPE_BOARDCFG_PM_INDEX 0x2
+#define DESC_TYPE_BOARDCFG_RM_INDEX 0x3
+
+#define BOARD_CONFIG_RM_DESC_TYPE 0x000c
+#define BOARD_CONFIG_PM_DESC_TYPE 0x000e
+
+struct extboot_comp {
+ u32 comp_type;
+ u32 boot_core;
+ u32 comp_opts;
+ u64 dest_addr;
+ u32 comp_size;
+};
+
+struct extboot_header {
+ u8 magic[8];
+ u32 num_comps;
+ struct extboot_comp comps[5];
+ u32 reserved;
+};
+
+struct bcfg_desc {
+ u16 type;
+ u16 offset;
+ u16 size;
+ u8 devgrp;
+ u8 reserved;
+} __packed;
+
+struct bcfg_header {
+ u8 num_elems;
+ u8 sw_rev;
+ struct bcfg_desc descs[4];
+ u16 reserved;
+} __packed;
+
static bool sysfw_loaded;
static void *sysfw_load_address;
@@ -131,6 +171,15 @@ static void k3_sysfw_configure_using_fit(void *fit,
const void *cfg_fragment_addr;
size_t cfg_fragment_size;
int ret;
+#ifdef CONFIG_K3_DM_FW
+ u8 *buf;
+ struct extboot_header *common_header;
+ struct bcfg_header *bcfg_header;
+ struct extboot_comp *comp;
+ struct bcfg_desc *desc;
+ u32 addr;
+ bool copy_bcfg = false;
+#endif
/* Find the node holding the images information */
images = fdt_path_offset(fit, FIT_IMAGES_PATH);
@@ -165,6 +214,46 @@ static void k3_sysfw_configure_using_fit(void *fit,
(u32)cfg_fragment_size);
if (ret)
panic("Failed to set board PM configuration (%d)\n", ret);
+#else
+ /* Initialize shared memory boardconfig buffer */
+ buf = (u8 *)COMMON_HEADER_ADDRESS;
+ common_header = (struct extboot_header *)buf;
+
+ /* Check if we have a struct populated by ROM in memory already */
+ if (strcmp((char *)common_header->magic, "EXTBOOT"))
+ copy_bcfg = true;
+
+ if (copy_bcfg) {
+ strcpy((char *)common_header->magic, "EXTBOOT");
+ common_header->num_comps = 1;
+
+ comp = &common_header->comps[0];
+
+ comp->comp_type = COMP_TYPE_SBL_DATA;
+ comp->boot_core = 0x10;
+ comp->comp_opts = 0;
+ addr = (u32)BOARDCFG_ADDRESS;
+ comp->dest_addr = addr;
+ comp->comp_size = sizeof(*bcfg_header);
+
+ bcfg_header = (struct bcfg_header *)addr;
+
+ bcfg_header->num_elems = 2;
+ bcfg_header->sw_rev = 0;
+
+ desc = &bcfg_header->descs[0];
+
+ desc->type = BOARD_CONFIG_PM_DESC_TYPE;
+ desc->offset = sizeof(*bcfg_header);
+ desc->size = cfg_fragment_size;
+ comp->comp_size += desc->size;
+ desc->devgrp = 0;
+ desc->reserved = 0;
+ memcpy((u8 *)bcfg_header + desc->offset, cfg_fragment_addr,
+ cfg_fragment_size);
+
+ bcfg_header->descs[1].offset = desc->offset + desc->size;
+ }
#endif
/* Extract resource management (RM) specific configuration from FIT */
@@ -174,6 +263,20 @@ static void k3_sysfw_configure_using_fit(void *fit,
panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_RM,
ret);
+#ifdef CONFIG_K3_DM_FW
+ if (copy_bcfg) {
+ desc = &bcfg_header->descs[1];
+
+ desc->type = BOARD_CONFIG_RM_DESC_TYPE;
+ desc->size = cfg_fragment_size;
+ comp->comp_size += desc->size;
+ desc->devgrp = 0;
+ desc->reserved = 0;
+ memcpy((u8 *)bcfg_header + desc->offset, cfg_fragment_addr,
+ cfg_fragment_size);
+ }
+#endif
+
/* Apply resource management (RM) configuration to SYSFW */
ret = board_ops->board_config_rm(ti_sci,
(u64)(u32)cfg_fragment_addr,
--
2.17.1
next prev parent reply other threads:[~2021-05-11 8:30 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 8:30 [PATCHv4 00/26] J72xx: HSM rearch support series Tero Kristo
2021-05-11 8:30 ` [PATCHv4 01/26] lib: rational: copy the rational fraction lib routines from Linux Tero Kristo
2021-05-11 8:30 ` [PATCHv4 02/26] arm: mach-k3: introduce new config option for sysfw split Tero Kristo
2021-05-11 8:30 ` [PATCHv4 03/26] remoteproc: k3-r5: remove sysfw PM calls if not supported Tero Kristo
2021-05-11 8:30 ` [PATCHv4 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset Tero Kristo
2021-05-11 8:30 ` [PATCHv4 05/26] clk: fixed_rate: add API for directly registering fixed rate clocks Tero Kristo
2021-05-11 8:30 ` [PATCHv4 06/26] clk: fix clock tree dump to properly dump out every registered clock Tero Kristo
2021-05-11 8:30 ` [PATCHv4 07/26] clk: do not attempt to fetch clock pointer with null device Tero Kristo
2021-05-11 8:30 ` [PATCHv4 08/26] clk: add support for setting clk rate from cmdline Tero Kristo
2021-05-11 8:30 ` [PATCHv4 09/26] clk: sci-clk: fix return value of set_rate Tero Kristo
2021-05-11 8:30 ` [PATCHv4 10/26] clk: fix assigned-clocks to pass with deferring provider Tero Kristo
2021-05-11 8:30 ` [PATCHv4 11/26] clk: fix set_rate to clean up cached rates for the hierarchy Tero Kristo
2021-05-11 8:30 ` [PATCHv4 12/26] clk: add support for TI K3 SoC PLL Tero Kristo
2021-05-11 8:30 ` [PATCHv4 13/26] clk: add support for TI K3 SoC clocks Tero Kristo
2021-05-11 8:30 ` [PATCHv4 14/26] power: domain: Introduce driver for raw TI K3 PDs Tero Kristo
2021-05-11 22:44 ` Jaehoon Chung
2021-05-11 8:30 ` [PATCHv4 15/26] cmd: ti: pd: Add debug command for K3 power domains Tero Kristo
2021-05-11 22:44 ` Jaehoon Chung
2021-05-11 8:30 ` [PATCHv4 16/26] tools: k3_fit_atf: add DM binary to the FIT image Tero Kristo
2021-05-11 8:30 ` [PATCHv4 17/26] arm: mach-k3: Add platform data for j721e and j7200 Tero Kristo
2021-05-11 8:30 ` [PATCHv4 18/26] arm: mach-k3: add support for detecting firmware images from FIT Tero Kristo
2021-05-11 8:30 ` [PATCHv4 19/26] arm: mach-k3: do board config for PM only if supported Tero Kristo
2021-05-11 8:30 ` [PATCHv4 20/26] arm: mach-k3: common: Drop main r5 start Tero Kristo
2021-05-11 8:30 ` Tero Kristo [this message]
2021-05-11 8:31 ` [PATCHv4 22/26] arm: mach-k3: j721e_init: Force early probe of clk-k3 driver Tero Kristo
2021-05-11 8:31 ` [PATCHv4 23/26] configs: j721e_evm_r5: Enable raw access power management features Tero Kristo
2021-05-11 8:31 ` [PATCHv4 24/26] configs: j7200_evm_r5: " Tero Kristo
2021-05-11 8:31 ` [PATCHv4 25/26] board: ti: j72xx: README: update build instructions and image formats Tero Kristo
2021-05-11 8:31 ` [PATCHv4 26/26] arm: dts: k3-j72xx: correct MCU timer1 frequency Tero Kristo
2021-06-02 16:26 ` [PATCHv4 00/26] J72xx: HSM rearch support series Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210511083104.10868-22-kristo@kernel.org \
--to=kristo@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox