U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: sinan at writeme.com <sinan@writeme.com>
To: u-boot@lists.denx.de
Subject: [PATCH] mpc8379erdb: enable DM_USB DM_PCI DM_ETH
Date: Tue, 11 May 2021 14:18:02 -0400	[thread overview]
Message-ID: <20210511181802.24606-1-sinan@writeme.com> (raw)

From: Sinan Akman <sinan@writeme.com>

Signed-off-by: Sinan Akman <sinan@writeme.com>
---
 arch/powerpc/cpu/mpc83xx/pci.c            |  2 ++
 arch/powerpc/dts/mpc8379erdb.dts          | 52 +++++++++++++++++++++++++++++++
 board/freescale/mpc837xerdb/mpc837xerdb.c | 11 ++++++-
 configs/MPC837XERDB_defconfig             | 18 +++++------
 4 files changed, 73 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/cpu/mpc83xx/pci.c b/arch/powerpc/cpu/mpc83xx/pci.c
index 5c289d0022..507ab3417b 100644
--- a/arch/powerpc/cpu/mpc83xx/pci.c
+++ b/arch/powerpc/cpu/mpc83xx/pci.c
@@ -27,6 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
 static struct pci_controller pci_hose[MAX_BUSES];
 static int pci_num_buses;

+#if !defined(CONFIG_DM_PCI)
 static void pci_init_bus(int bus, struct pci_region *reg)
 {
 	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
@@ -184,6 +185,7 @@ void mpc83xx_pcislave_unlock(int bus)
 	hose->last_busno = pci_hose_scan(hose);
 }
 #endif
+#endif /* CONFIG_DM_PCI */

 #if defined(CONFIG_OF_LIBFDT)
 void ft_pci_setup(void *blob, struct bd_info *bd)
diff --git a/arch/powerpc/dts/mpc8379erdb.dts b/arch/powerpc/dts/mpc8379erdb.dts
index b1881b161c..2e7c8f103c 100644
--- a/arch/powerpc/dts/mpc8379erdb.dts
+++ b/arch/powerpc/dts/mpc8379erdb.dts
@@ -69,6 +69,58 @@
 			device_type = "ipic";
 		};

+		usb at 23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet at 24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			fixed-link = <1 0 1000 0 0>;
+			phy-handle = <&phy>;
+			fsl,magic-packet;
+
+			mdio at 520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,etsec2-mdio";
+				reg = <0x520 0x20>;
+
+				phy: ethernet-phy at 2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+			};
+		};
+
+		pci0: pci at e0008300 {
+	                #address-cells = <3>;
+	                #size-cells = <2>;
+	                #interrupt-cells = <1>;
+	                device_type = "pci";
+	                reg = <0x0 0xe0008300 0x0 0x00000fff>;
+			compatible = "fsl,mpc837x-pci";
+	                clock-frequency = <0>;
+		};
+
 	};

 };
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index 624e92ef9c..66b3d9a465 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -176,7 +176,7 @@ int board_early_init_f(void)
 }

 #ifdef CONFIG_FSL_ESDHC
-#if !(CONFIG_IS_ENABLED(DM_MMC))
+#if !(CONFIG_IS_ENABLED(DM_MMC) || CONFIG_IS_ENABLED(DM_USB))
 int board_mmc_init(struct bd_info *bd)
 {
 	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
@@ -217,6 +217,15 @@ int misc_init_r(void)
 	return rc;
 }

+int board_late_init(void)
+{
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+#ifdef CONFIG_USB
+	clrsetbits_be32(&immap->sysconf.sicrl, SICRL_USB_A, 0x40000000);
+#endif
+	return 0;
+}
+
 #if defined(CONFIG_OF_BOARD_SETUP)

 int ft_board_setup(void *blob, struct bd_info *bd)
diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig
index 63ce36d533..b6161ca072 100644
--- a/configs/MPC837XERDB_defconfig
+++ b/configs/MPC837XERDB_defconfig
@@ -147,7 +147,9 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PCIE"
 CONFIG_BOOTDELAY=6
+CONFIG_BOARD_LATE_INIT=y
 CONFIG_MISC_INIT_R=y
+CONFIG_PCI_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_I2C=y
@@ -173,16 +175,14 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_RGMII=y
+CONFIG_MII=y
 CONFIG_TSEC_ENET=y
+CONFIG_DM_PCI=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
--
2.14.5

             reply	other threads:[~2021-05-11 18:18 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 18:18 sinan at writeme.com [this message]
2021-07-06 22:50 ` [PATCH] mpc8379erdb: enable DM_USB DM_PCI DM_ETH Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511181802.24606-1-sinan@writeme.com \
    --to=sinan@writeme.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox