From: Leo Liang <ycliang@andestech.com>
To: u-boot@lists.denx.de
Subject: [PULL] u-boot-riscv/master
Date: Fri, 14 May 2021 19:10:10 +0800 [thread overview]
Message-ID: <20210514110926.GA25920@andestech.com> (raw)
Hi Tom,
CI result: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/7504
The following changes since commit 530c8d4af2e18c6142ab7cac6f11dd92c02b2bc9:
Merge branch '2021-05-13-extension-board-detection-and-DT-overlay-application' (2021-05-13 13:09:14 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to ffdc71bc0977c1e6b7b6e6a5a005e1f77213bf21:
Revert "riscv: cpu: fu740: clear feature disable CSR" (2021-05-14 16:26:20 +0800)
----------------------------------------------------------------
Bin Meng (1):
Revert "riscv: cpu: fu740: clear feature disable CSR"
Rick Chen (1):
MAINTAINERS: Add a co-maintainer for RISC-V
Sean Anderson (11):
clk: Warn on failure to assign rate
clk: k210: Fix PLLs not being enabled
clk: k210: Fix PLL enable always getting taken
clk: k210: Remove k210_register_pll
clk: k210: Move the clint clock to under aclk
clk: Add support for the k210 clock driver pre-relocation
riscv: Enable some devices pre-relocation
riscv: Enable AI ram on K210
riscv: k210: Rename airam to aisram
riscv: k210: Use AI as the parent clock of aisram, not PLL1
riscv: Don't reserve AI ram in k210 dts
Vincent Chen (1):
pwm: sifive: make set_config() and set_enable() work properly
MAINTAINERS | 1 +
arch/riscv/cpu/fu540/spl.c | 15 ---------------
arch/riscv/dts/k210.dtsi | 22 +++++++---------------
board/sipeed/maix/maix.c | 14 ++++++++++++--
configs/sipeed_maix_bitm_defconfig | 2 ++
drivers/clk/clk-uclass.c | 11 +++++++----
drivers/clk/kendryte/clk.c | 26 ++++++++++++++------------
drivers/clk/kendryte/pll.c | 26 ++++----------------------
drivers/pwm/pwm-sifive.c | 21 +++++++++++----------
include/configs/sipeed-maix.h | 3 +--
include/kendryte/pll.h | 4 ----
11 files changed, 59 insertions(+), 86 deletions(-)
Best regards,
Leo
next reply other threads:[~2021-05-14 11:10 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-14 11:10 Leo Liang [this message]
2021-05-14 12:23 ` [PULL] u-boot-riscv/master Bin Meng
2021-05-15 12:09 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2025-10-29 7:38 Leo Liang
2025-10-29 18:07 ` Tom Rini
2025-07-17 7:02 Leo Liang
2025-07-17 19:02 ` Tom Rini
2025-06-02 8:31 Leo Liang
2025-06-02 22:36 ` Tom Rini
2024-09-10 2:38 Leo Liang
2024-09-10 17:22 ` Tom Rini
2023-10-19 11:41 Leo Liang
2023-10-19 14:57 ` Tom Rini
2023-10-05 8:10 Leo Liang
2023-10-05 17:46 ` Tom Rini
2023-09-26 5:21 Leo Liang
2023-09-26 14:05 ` Tom Rini
2023-09-21 1:36 Leo Liang
2023-09-21 19:57 ` Tom Rini
2023-09-05 3:30 Leo Liang
2023-09-05 18:43 ` Tom Rini
2023-08-10 10:32 Leo Liang
2023-08-10 16:22 ` Tom Rini
2023-08-02 5:48 Leo Liang
2023-08-02 6:27 ` Bin Meng
2023-08-02 9:31 ` Leo Liang
2023-08-03 0:59 ` Minda Chen
2023-07-24 8:01 Leo Liang
2023-07-24 16:41 ` Tom Rini
2023-07-12 6:58 Leo Liang
2023-07-12 19:43 ` Tom Rini
2023-04-21 0:41 Leo Liang
2023-04-23 16:15 ` Tom Rini
2023-02-17 12:12 Leo Liang
2023-02-17 15:01 ` Tom Rini
2023-02-19 6:09 ` Leo Liang
2023-02-02 6:30 Leo Liang
2023-02-02 19:18 ` Tom Rini
2022-12-08 11:23 Leo Liang
2022-12-08 16:24 ` Tom Rini
2022-11-16 6:16 Leo Liang
2022-11-16 18:01 ` Tom Rini
2022-11-03 7:04 Leo Liang
2022-11-03 16:57 ` Tom Rini
2022-11-04 0:28 ` Leo Liang
2022-10-20 12:36 Leo Liang
2022-10-20 19:03 ` Tom Rini
2022-09-06 6:07 Leo Liang
2022-09-06 15:50 ` Tom Rini
2022-08-11 21:38 Leo Liang
2022-08-12 12:17 ` Tom Rini
2022-05-27 2:36 Leo Liang
2022-05-27 13:30 ` Tom Rini
2022-05-28 9:02 ` Leo Liang
2022-05-30 15:05 ` Tom Rini
2022-08-11 22:22 ` Leo Liang
2022-04-06 4:43 Leo Liang
2022-04-06 15:55 ` Tom Rini
2022-03-16 2:56 Leo Liang
2022-03-16 14:48 ` Tom Rini
2022-02-10 15:16 Leo Liang
2022-02-11 0:35 ` Tom Rini
2021-12-03 6:19 Leo Liang
2021-12-04 17:50 ` Tom Rini
2021-11-09 2:40 Leo Liang
2021-11-09 13:45 ` Tom Rini
2021-10-20 7:14 Leo Liang
2021-10-21 11:51 ` Tom Rini
2021-10-07 11:51 Leo Liang
2021-10-07 15:43 ` Tom Rini
2021-09-07 8:20 Leo Liang
2021-09-07 15:33 ` Tom Rini
2021-08-19 8:56 Leo Liang
2021-08-19 14:13 ` Tom Rini
2021-07-22 2:15 Leo Liang
2021-07-22 12:15 ` Tom Rini
2021-07-07 15:21 Leo Liang
2021-07-07 17:33 ` Tom Rini
2021-07-06 16:02 Leo Liang
2021-07-06 19:52 ` Tom Rini
2021-07-07 4:05 ` Tianrui Wei
2021-06-17 3:31 Leo Liang
2021-06-17 14:51 ` Tom Rini
2021-05-31 10:16 Leo Liang
2021-05-31 18:59 ` Tom Rini
2021-05-26 8:12 Leo Liang
2021-05-26 15:24 ` Tom Rini
2021-05-27 8:57 ` Green Wan
2021-05-27 10:41 ` Leo Liang
2021-05-27 11:20 ` Tom Rini
2021-05-27 13:56 ` Green Wan
2021-05-20 2:19 Leo Liang
2021-05-21 14:07 ` Tom Rini
2021-05-18 1:48 Leo Liang
2021-05-18 18:17 ` Tom Rini
2021-05-07 1:06 Leo Liang
2021-05-07 1:09 ` Tom Rini
2021-05-07 1:41 ` Leo Liang
2021-05-07 1:55 ` Sean Anderson
2021-05-07 16:15 ` Tom Rini
2021-05-07 14:21 ` Dimitri John Ledkov
2021-05-07 14:35 ` Tom Rini
2021-05-07 1:49 ` Sean Anderson
2021-05-10 6:57 ` Leo Liang
2021-05-07 15:37 ` Tom Rini
2021-04-08 10:44 Leo Liang
2021-04-08 19:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210514110926.GA25920@andestech.com \
--to=ycliang@andestech.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox