[PATCH 2/6] clk: sunxi: v3s: Implement EMAC clocks/resets

[Andre Przywara <andre.przywara@arm.com>]

On Wed, 19 May 2021 21:42:04 +0200
Andreas Rehn <rehn.andreas86@gmail.com> wrote:

> Add emac clock and reset register/bits.
> 
> Signed-off-by: Andreas Rehn <rehn.andreas86@gmail.com>

Compared against the manual and the Linux driver.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
>  drivers/clk/sunxi/clk_v3s.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c
> index 29622199fd..55fc597043 100644
> --- a/drivers/clk/sunxi/clk_v3s.c
> +++ b/drivers/clk/sunxi/clk_v3s.c
> @@ -17,6 +17,7 @@ static struct ccu_clk_gate v3s_gates[] = {
>  	[CLK_BUS_MMC0]		= GATE(0x060, BIT(8)),
>  	[CLK_BUS_MMC1]		= GATE(0x060, BIT(9)),
>  	[CLK_BUS_MMC2]		= GATE(0x060, BIT(10)),
> +	[CLK_BUS_EMAC]		= GATE(0x060, BIT(17)),
>  	[CLK_BUS_SPI0]		= GATE(0x060, BIT(20)),
>  	[CLK_BUS_OTG]		= GATE(0x060, BIT(24)),
>  
> @@ -24,6 +25,8 @@ static struct ccu_clk_gate v3s_gates[] = {
>  	[CLK_BUS_UART1]		= GATE(0x06c, BIT(17)),
>  	[CLK_BUS_UART2]		= GATE(0x06c, BIT(18)),
>  
> +	[CLK_BUS_EPHY]		= GATE(0x070, BIT(0)),
> +
>  	[CLK_SPI0]		= GATE(0x0a0, BIT(31)),
>  
>  	[CLK_USB_PHY0]          = GATE(0x0cc, BIT(8)),
> @@ -35,9 +38,12 @@ static struct ccu_reset v3s_resets[] = {
>  	[RST_BUS_MMC0]		= RESET(0x2c0, BIT(8)),
>  	[RST_BUS_MMC1]		= RESET(0x2c0, BIT(9)),
>  	[RST_BUS_MMC2]		= RESET(0x2c0, BIT(10)),
> +	[RST_BUS_EMAC]		= RESET(0x2c0, BIT(17)),
>  	[RST_BUS_SPI0]		= RESET(0x2c0, BIT(20)),
>  	[RST_BUS_OTG]		= RESET(0x2c0, BIT(24)),
>  
> +	[RST_BUS_EPHY]		= RESET(0x2c8, BIT(2)),
> +
>  	[RST_BUS_UART0]		= RESET(0x2d8, BIT(16)),
>  	[RST_BUS_UART1]		= RESET(0x2d8, BIT(17)),
>  	[RST_BUS_UART2]		= RESET(0x2d8, BIT(18)),