From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Cc: Vipin Kumar <vipin.kumar@st.com>
Subject: [PATCH 14/18] arm: Remove spear320 boards
Date: Sat, 22 May 2021 08:47:13 -0400 [thread overview]
Message-ID: <20210522124757.18639-15-trini@konsulko.com> (raw)
In-Reply-To: <20210522124757.18639-1-trini@konsulko.com>
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM. Remove them. As this is
also the last SPEAR3XX platform, remove that symbol as well.
Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
arch/arm/Kconfig | 8 ---
arch/arm/cpu/arm926ejs/spear/cpu.c | 8 +--
arch/arm/cpu/arm926ejs/spear/spl.c | 2 -
arch/arm/cpu/arm926ejs/spear/timer.c | 5 +-
arch/arm/include/asm/arch-spear/hardware.h | 8 ---
arch/arm/include/asm/arch-spear/spr_misc.h | 5 +-
board/spear/spear320/Kconfig | 15 -----
board/spear/spear320/MAINTAINERS | 15 -----
board/spear/spear320/Makefile | 6 --
board/spear/spear320/spear320.c | 78 ----------------------
configs/spear320_defconfig | 35 ----------
configs/spear320_nand_defconfig | 35 ----------
configs/spear320_pnor_defconfig | 38 -----------
configs/spear320_usbtty_defconfig | 37 ----------
configs/spear320_usbtty_nand_defconfig | 37 ----------
configs/spear320_usbtty_pnor_defconfig | 40 -----------
drivers/i2c/Kconfig | 2 +-
include/configs/spear-common.h | 2 -
18 files changed, 5 insertions(+), 371 deletions(-)
delete mode 100644 board/spear/spear320/Kconfig
delete mode 100644 board/spear/spear320/MAINTAINERS
delete mode 100644 board/spear/spear320/Makefile
delete mode 100644 board/spear/spear320/spear320.c
delete mode 100644 configs/spear320_defconfig
delete mode 100644 configs/spear320_nand_defconfig
delete mode 100644 configs/spear320_pnor_defconfig
delete mode 100644 configs/spear320_usbtty_defconfig
delete mode 100644 configs/spear320_usbtty_nand_defconfig
delete mode 100644 configs/spear320_usbtty_pnor_defconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7d6339fbf422..d71010ec1308 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -558,13 +558,6 @@ config ARCH_ORION5X
bool "Marvell Orion"
select CPU_ARM926EJS
-config TARGET_SPEAR320
- bool "Support spear320"
- select BOARD_EARLY_INIT_F
- select CPU_ARM926EJS
- select PL011_SERIAL
- imply CMD_SAVES
-
config TARGET_SPEAR600
bool "Support spear600"
select BOARD_EARLY_INIT_F
@@ -1984,7 +1977,6 @@ source "board/hisilicon/poplar/Kconfig"
source "board/isee/igep003x/Kconfig"
source "board/kontron/sl28/Kconfig"
source "board/myir/mys_6ulx/Kconfig"
-source "board/spear/spear320/Kconfig"
source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st/stv0991/Kconfig"
diff --git a/arch/arm/cpu/arm926ejs/spear/cpu.c b/arch/arm/cpu/arm926ejs/spear/cpu.c
index d05878edf897..2e0dd9ec33fd 100644
--- a/arch/arm/cpu/arm926ejs/spear/cpu.c
+++ b/arch/arm/cpu/arm926ejs/spear/cpu.c
@@ -19,9 +19,7 @@ int arch_cpu_init(void)
periph1_clken = readl(&misc_p->periph1_clken);
-#if defined(CONFIG_SPEAR3XX)
- periph1_clken |= MISC_GPT2ENB;
-#elif defined(CONFIG_SPEAR600)
+#if defined(CONFIG_SPEAR600)
periph1_clken |= MISC_GPT3ENB;
#endif
@@ -66,9 +64,7 @@ int arch_cpu_init(void)
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
-#if defined(CONFIG_SPEAR320)
- printf("CPU: SPEAr320\n");
-#elif defined(CONFIG_SPEAR600)
+#if defined(CONFIG_SPEAR600)
printf("CPU: SPEAr600\n");
#else
#error CPU not supported in spear platform
diff --git a/arch/arm/cpu/arm926ejs/spear/spl.c b/arch/arm/cpu/arm926ejs/spear/spl.c
index c99e78d86f09..772eaf2b2f52 100644
--- a/arch/arm/cpu/arm926ejs/spear/spl.c
+++ b/arch/arm/cpu/arm926ejs/spear/spl.c
@@ -205,8 +205,6 @@ int get_socrev(void)
return SOC_SPEAR600_BA;
else
return SOC_SPEAR_NA;
-#if defined(CONFIG_SPEAR320)
- return SOC_SPEAR320;
#endif
}
diff --git a/arch/arm/cpu/arm926ejs/spear/timer.c b/arch/arm/cpu/arm926ejs/spear/timer.c
index b42baa71506f..d5f6cccaae43 100644
--- a/arch/arm/cpu/arm926ejs/spear/timer.c
+++ b/arch/arm/cpu/arm926ejs/spear/timer.c
@@ -36,10 +36,7 @@ int timer_init(void)
u32 synth;
/* Prescaler setting */
-#if defined(CONFIG_SPEAR3XX)
- writel(MISC_PRSC_CFG, &misc_regs_p->prsc2_clk_cfg);
- synth = MISC_GPT4SYNTH;
-#elif defined(CONFIG_SPEAR600)
+#if defined(CONFIG_SPEAR600)
writel(MISC_PRSC_CFG, &misc_regs_p->prsc1_clk_cfg);
synth = MISC_GPT3SYNTH;
#else
diff --git a/arch/arm/include/asm/arch-spear/hardware.h b/arch/arm/include/asm/arch-spear/hardware.h
index b0bf1af17054..69b97a03e8f8 100644
--- a/arch/arm/include/asm/arch-spear/hardware.h
+++ b/arch/arm/include/asm/arch-spear/hardware.h
@@ -41,13 +41,5 @@
#define CONFIG_SPEAR_MPMCREGS 100
-#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_FSMC_BASE 0x4C000000
-
-#define CONFIG_SPEAR_EMIBASE 0x40000000
-#define CONFIG_SPEAR_RASBASE 0xB3000000
-
-#define CONFIG_SYS_MACB0_BASE 0xAA000000
-
#endif
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-spear/spr_misc.h b/arch/arm/include/asm/arch-spear/spr_misc.h
index 017111935193..c1a30e24db9e 100644
--- a/arch/arm/include/asm/arch-spear/spr_misc.h
+++ b/arch/arm/include/asm/arch-spear/spr_misc.h
@@ -88,10 +88,7 @@ struct misc_regs {
#define SYNTH23 0x00020003
/* PLLx_FRQ value */
-#if defined(CONFIG_SPEAR3XX)
-#define FREQ_332 0xA600010C
-#define FREQ_266 0x8500010C
-#elif defined(CONFIG_SPEAR600)
+#if defined(CONFIG_SPEAR600)
#define FREQ_332 0xA600010F
#define FREQ_266 0x8500010F
#endif
diff --git a/board/spear/spear320/Kconfig b/board/spear/spear320/Kconfig
deleted file mode 100644
index df176230f406..000000000000
--- a/board/spear/spear320/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_SPEAR320
-
-config SYS_BOARD
- default "spear320"
-
-config SYS_VENDOR
- default "spear"
-
-config SYS_SOC
- default "spear"
-
-config SYS_CONFIG_NAME
- default "spear3xx_evb"
-
-endif
diff --git a/board/spear/spear320/MAINTAINERS b/board/spear/spear320/MAINTAINERS
deleted file mode 100644
index bf7809230f78..000000000000
--- a/board/spear/spear320/MAINTAINERS
+++ /dev/null
@@ -1,15 +0,0 @@
-SPEAR320 BOARD
-M: Vipin Kumar <vipin.kumar@st.com>
-S: Maintained
-F: board/spear/spear320/
-F: include/configs/spear3xx_evb.h
-F: configs/spear320_defconfig
-
-SPEAR320_NAND BOARD
-#M: -
-S: Maintained
-F: configs/spear320_nand_defconfig
-F: configs/spear320_pnor_defconfig
-F: configs/spear320_usbtty_defconfig
-F: configs/spear320_usbtty_nand_defconfig
-F: configs/spear320_usbtty_pnor_defconfig
diff --git a/board/spear/spear320/Makefile b/board/spear/spear320/Makefile
deleted file mode 100644
index 062cbc417a47..000000000000
--- a/board/spear/spear320/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y := spear320.o
diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c
deleted file mode 100644
index 291337b80497..000000000000
--- a/board/spear/spear320/spear320.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2009
- * Ryan Chen, ST Micoelectronics, ryan.chen@st.com.
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <net.h>
-#include <netdev.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <linux/mtd/fsmc_nand.h>
-#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_defs.h>
-#include <asm/arch/spr_misc.h>
-
-#define PLGPIO_SEL_36 0xb3000028
-#define PLGPIO_IO_36 0xb3000038
-
-static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
-
-static void spear_phy_reset(void)
-{
- writel(0x10, PLGPIO_IO_36);
- writel(0x10, PLGPIO_SEL_36);
-}
-
-int board_init(void)
-{
- spear_phy_reset();
- return spear_board_init(MACH_TYPE_SPEAR320);
-}
-
-/*
- * board_nand_init - Board specific NAND initialization
- * @nand: mtd private chip structure
- *
- * Called by nand_init_chip to initialize the board specific functions
- */
-
-void board_nand_init()
-{
- struct misc_regs *const misc_regs_p =
- (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
- struct nand_chip *nand = &nand_chip[0];
-
-#if defined(CONFIG_NAND_FSMC)
- if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG30) ||
- ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG31)) {
-
- fsmc_nand_init(nand);
- }
-#endif
-
- return;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- int ret = 0;
-
-#if defined(CONFIG_ETH_DESIGNWARE)
- u32 interface = PHY_INTERFACE_MODE_MII;
- if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0)
- ret++;
-#endif
-#if defined(CONFIG_MACB)
- if (macb_eth_initialize(0, (void *)CONFIG_SYS_MACB0_BASE,
- CONFIG_MACB0_PHY) >= 0)
- ret++;
-#endif
- return ret;
-}
diff --git a/configs/spear320_defconfig b/configs/spear320_defconfig
deleted file mode 100644
index edefff689d9a..000000000000
--- a/configs/spear320_defconfig
+++ /dev/null
@@ -1,35 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xF8040000
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
diff --git a/configs/spear320_nand_defconfig b/configs/spear320_nand_defconfig
deleted file mode 100644
index 1646c4aa8734..000000000000
--- a/configs/spear320_nand_defconfig
+++ /dev/null
@@ -1,35 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
diff --git a/configs/spear320_pnor_defconfig b/configs/spear320_pnor_defconfig
deleted file mode 100644
index 1c0b625e53fb..000000000000
--- a/configs/spear320_pnor_defconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,FLASH_PNOR"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x44060000
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
diff --git a/configs/spear320_usbtty_defconfig b/configs/spear320_usbtty_defconfig
deleted file mode 100644
index 62fe1fa6a564..000000000000
--- a/configs/spear320_usbtty_defconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY"
-CONFIG_BOOTDELAY=-1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xF8040000
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
diff --git a/configs/spear320_usbtty_nand_defconfig b/configs/spear320_usbtty_nand_defconfig
deleted file mode 100644
index e9f5c2d26eb3..000000000000
--- a/configs/spear320_usbtty_nand_defconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY"
-CONFIG_BOOTDELAY=-1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
diff --git a/configs/spear320_usbtty_pnor_defconfig b/configs/spear320_usbtty_pnor_defconfig
deleted file mode 100644
index 3d993d724bf0..000000000000
--- a/configs/spear320_usbtty_pnor_defconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY,FLASH_PNOR"
-CONFIG_BOOTDELAY=-1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x44060000
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index ef9fdb104fa8..1026409abf7a 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -139,7 +139,7 @@ config SYS_I2C_DW
config SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
bool "DW I2C Enable Status Register not supported"
depends on SYS_I2C_DW && \
- (TARGET_SPEAR320 || TARGET_SPEAR600 || TARGET_X600)
+ (TARGET_SPEAR600 || TARGET_X600)
default y
help
Some versions of the Designware I2C controller do not support the
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 122990e63489..d77ea6010a35 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -33,8 +33,6 @@
#define CONFIG_SYS_I2C
#if defined(CONFIG_SPEAR600)
#define CONFIG_SYS_I2C_BASE 0xD0200000
-#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_I2C_BASE 0xD0180000
#endif
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x02
--
2.17.1
next prev parent reply other threads:[~2021-05-22 12:51 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-22 12:46 [PATCH 00/18] Migrate to DM_USB and OF_CONTROL support Tom Rini
2021-05-22 12:47 ` [PATCH 01/18] snapper9260/snapper9g20: Disable USB Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 02/18] openrd: Perform base CONFIG_DM enablement Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 03/18] pogo_e02: " Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 04/18] iconnect: " Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 05/18] ib62x0: " Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 06/18] dockstar: " Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 07/18] mx6memcal: Disable USB GADGET in SPL Tom Rini
2021-05-25 14:10 ` Eric Nelson
2021-05-25 15:47 ` Tom Rini
2021-05-25 16:19 ` Eric Nelson
2021-05-25 16:45 ` Tom Rini
2021-05-25 16:51 ` Eric Nelson
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 08/18] arm: Remove at91rm9200ek boards Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 09/18] arm: Remove edb9315a board Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 10/18] arm: Remove gplugd board Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 11/18] arm: Remove nsa310s board Tom Rini
2021-05-24 6:54 ` Tony (bodhi)
2021-05-24 12:33 ` Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-07-08 2:55 ` Tom Rini
2021-07-08 3:17 ` Tony Dinh
2021-05-22 12:47 ` [PATCH 12/18] arm: Remove spear300 boards Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 13/18] arm: Remove spear310 boards Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` Tom Rini [this message]
2021-07-08 2:54 ` [PATCH 14/18] arm: Remove spear320 boards Tom Rini
2021-05-22 12:47 ` [PATCH 15/18] arm: Remove spear600 boards and the rest of SPEAr support Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 16/18] sniper: Add build guards around MUSB support code Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 17/18] usb: Add correct depends for CMD_USB_MASS_STORAGE Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 18/18] usb: Require migration to DM_USB and OF_CONTROL for non-SPL cases Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210522124757.18639-15-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vipin.kumar@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox