From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Cc: Eric Nelson <eric@nelint.com>, Stefano Babic <sbabic@denx.de>
Subject: [PATCH 07/18] mx6memcal: Disable USB GADGET in SPL
Date: Sat, 22 May 2021 08:47:06 -0400 [thread overview]
Message-ID: <20210522124757.18639-8-trini@konsulko.com> (raw)
In-Reply-To: <20210522124757.18639-1-trini@konsulko.com>
As this board does not use CONFIG_OF_CONTROL and the DM_USB migration
deadline has passed, disable USB_GADGET support.
Cc: Eric Nelson <eric@nelint.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
I realize this removes an important functional part of the board. I
suspect the path forward here is to make a generic mx6 device tree to
use here, so that the USB functionality keeps working.
---
configs/mx6memcal_defconfig | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig
index 41ff942cf1ce..a860fbe77738 100644
--- a/configs/mx6memcal_defconfig
+++ b/configs/mx6memcal_defconfig
@@ -16,9 +16,6 @@ CONFIG_SPL=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL"
CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_GADGET=y
-CONFIG_SPL_USB_ETHER=y
-CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
@@ -45,11 +42,5 @@ CONFIG_BOUNCE_BUFFER=y
# CONFIG_MMC is not set
CONFIG_FSL_USDHC=y
CONFIG_MXC_UART=y
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="FSL"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_CI_UDC=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
--
2.17.1
next prev parent reply other threads:[~2021-05-22 12:49 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-22 12:46 [PATCH 00/18] Migrate to DM_USB and OF_CONTROL support Tom Rini
2021-05-22 12:47 ` [PATCH 01/18] snapper9260/snapper9g20: Disable USB Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 02/18] openrd: Perform base CONFIG_DM enablement Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 03/18] pogo_e02: " Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 04/18] iconnect: " Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 05/18] ib62x0: " Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-22 12:47 ` [PATCH 06/18] dockstar: " Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` Tom Rini [this message]
2021-05-25 14:10 ` [PATCH 07/18] mx6memcal: Disable USB GADGET in SPL Eric Nelson
2021-05-25 15:47 ` Tom Rini
2021-05-25 16:19 ` Eric Nelson
2021-05-25 16:45 ` Tom Rini
2021-05-25 16:51 ` Eric Nelson
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 08/18] arm: Remove at91rm9200ek boards Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 09/18] arm: Remove edb9315a board Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 10/18] arm: Remove gplugd board Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 11/18] arm: Remove nsa310s board Tom Rini
2021-05-24 6:54 ` Tony (bodhi)
2021-05-24 12:33 ` Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-07-08 2:55 ` Tom Rini
2021-07-08 3:17 ` Tony Dinh
2021-05-22 12:47 ` [PATCH 12/18] arm: Remove spear300 boards Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 13/18] arm: Remove spear310 boards Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 14/18] arm: Remove spear320 boards Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 15/18] arm: Remove spear600 boards and the rest of SPEAr support Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 16/18] sniper: Add build guards around MUSB support code Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 17/18] usb: Add correct depends for CMD_USB_MASS_STORAGE Tom Rini
2021-07-08 2:54 ` Tom Rini
2021-05-22 12:47 ` [PATCH 18/18] usb: Require migration to DM_USB and OF_CONTROL for non-SPL cases Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210522124757.18639-8-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=eric@nelint.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox