Re: [PATCH v2 4/6] net: sun8i-emac: add v3s variant

[Andre Przywara <andre.przywara@arm.com>]

On Sun, 23 May 2021 01:22:38 +0200
Andreas Rehn <rehn.andreas86@gmail.com> wrote:

Hi,

> Add variant V3S_EMAC.
> Handle pinmux compile time error by skipping goio setup, because
> V3s uses internal phy and don't expose pins.
> 
> Signed-off-by: Andreas Rehn <rehn.andreas86@gmail.com>

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
> Changes in v2:
> 	- skip pinmux and add proper description
> 	- Add V3S variant add it to compatible list
> 	- Skip (R)GMII flags and handle sun8i_handle_internal_phy
> 
>  drivers/net/sun8i_emac.c | 15 ++++++++++++---
>  1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
> index 5a1b38bf80..ab9f61994c 100644
> --- a/drivers/net/sun8i_emac.c
> +++ b/drivers/net/sun8i_emac.c
> @@ -145,6 +145,7 @@ enum emac_variant {
>  	A64_EMAC,
>  	R40_GMAC,
>  	H6_EMAC,
> +	V3S_EMAC,
>  };
>  
>  struct emac_dma_desc {
> @@ -303,7 +304,7 @@ static void sun8i_adjust_link(struct emac_eth_dev *priv,
>  static u32 sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 reg)
>  {
>  	if (priv->use_internal_phy) {
> -		/* H3 based SoC's that has an Internal 100MBit PHY
> +		/* H3 and V3s based SoC's that has an Internal 100MBit PHY
>  		 * needs to be configured and powered up before use
>  		*/
>  		reg &= ~H3_EPHY_DEFAULT_MASK;
> @@ -354,7 +355,8 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
>  	case PHY_INTERFACE_MODE_RGMII_ID:
>  	case PHY_INTERFACE_MODE_RGMII_RXID:
>  	case PHY_INTERFACE_MODE_RGMII_TXID:
> -		reg |= SC_EPIT | SC_ETCS_INT_GMII;
> +		if (priv->variant != V3S_EMAC)
> +			reg |= SC_EPIT | SC_ETCS_INT_GMII;
>  		break;
>  	case PHY_INTERFACE_MODE_RMII:
>  		if (priv->variant == H3_EMAC ||
> @@ -566,6 +568,10 @@ static int parse_phy_pins(struct udevice *dev)
>  		iomux = SUN8I_IOMUX;
>  	else if (IS_ENABLED(CONFIG_MACH_SUN50I))
>  		iomux = SUN8I_IOMUX;
> +	else if (IS_ENABLED(CONFIG_MACH_SUN8I_V3S))
> +		// V3s does not expose any MAC pins,
> +		// but case is required to handle BUILD_BUG_ON_MSG.
> +		return 0;
>  	else
>  		BUILD_BUG_ON_MSG(1, "missing pinmux value for Ethernet pins");
>  
> @@ -956,7 +962,8 @@ static int sun8i_emac_eth_of_to_plat(struct udevice *dev)
>  		return -EINVAL;
>  	}
>  
> -	if (priv->variant == H3_EMAC) {
> +	if (priv->variant == H3_EMAC ||
> +	    priv->variant == V3S_EMAC) {
>  		ret = sun8i_handle_internal_phy(dev, priv);
>  		if (ret)
>  			return ret;
> @@ -1009,6 +1016,8 @@ static const struct udevice_id sun8i_emac_eth_ids[] = {
>  		.data = (uintptr_t)R40_GMAC },
>  	{.compatible = "allwinner,sun50i-h6-emac",
>  		.data = (uintptr_t)H6_EMAC },
> +	{.compatible = "allwinner,sun8i-v3s-emac",
> +		.data = (uintptr_t)V3S_EMAC },
>  	{ }
>  };
>