From: Tero Kristo <kristo@kernel.org>
To: u-boot@lists.denx.de, lokeshvutla@ti.com
Cc: trini@konsulko.com
Subject: [PATCHv5 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset
Date: Thu, 3 Jun 2021 09:32:33 +0300 [thread overview]
Message-ID: <20210603063255.5483-5-kristo@kernel.org> (raw)
In-Reply-To: <20210603063255.5483-1-kristo@kernel.org>
From: Lokesh Vutla <lokeshvutla@ti.com>
board_fit_image_post_process() passes only start and size of the image,
but type of the image is not passed. So pass fit and node_offset, to
derive information about image to be processed.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
---
arch/arm/mach-k3/security.c | 3 ++-
arch/arm/mach-keystone/mon.c | 3 ++-
board/ti/am335x/board.c | 3 ++-
board/ti/am43xx/board.c | 3 ++-
board/ti/am57xx/board.c | 3 ++-
board/ti/dra7xx/evm.c | 3 ++-
common/image-fit.c | 2 +-
common/spl/spl_fit.c | 2 +-
include/image.h | 5 ++++-
9 files changed, 18 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-k3/security.c b/arch/arm/mach-k3/security.c
index 66f90a5a34..5b5ff9ba7b 100644
--- a/arch/arm/mach-k3/security.c
+++ b/arch/arm/mach-k3/security.c
@@ -18,7 +18,8 @@
#include <spl.h>
#include <asm/arch/sys_proto.h>
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+ size_t *p_size)
{
struct ti_sci_handle *ti_sci = get_ti_sci_handle();
struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;
diff --git a/arch/arm/mach-keystone/mon.c b/arch/arm/mach-keystone/mon.c
index 58995d73ac..b863bab196 100644
--- a/arch/arm/mach-keystone/mon.c
+++ b/arch/arm/mach-keystone/mon.c
@@ -103,7 +103,8 @@ static int k2_hs_bm_auth(int cmd, void *arg1)
return result;
}
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+ size_t *p_size)
{
int result = 0;
void *image = *p_image;
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 5959ff73dc..5c156a5d1d 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -960,7 +960,8 @@ int board_fit_config_name_match(const char *name)
#endif
#ifdef CONFIG_TI_SECURE_DEVICE
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+ size_t *p_size)
{
secure_boot_verify_image(p_image, p_size);
}
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index e9febb9592..a71b588efc 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -896,7 +896,8 @@ int embedded_dtb_select(void)
#endif
#ifdef CONFIG_TI_SECURE_DEVICE
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+ size_t *p_size)
{
secure_boot_verify_image(p_image, p_size);
}
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 05c26c74d9..399a2e5d91 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -1199,7 +1199,8 @@ static int board_bootmode_has_emmc(void)
#endif
#ifdef CONFIG_TI_SECURE_DEVICE
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+ size_t *p_size)
{
secure_boot_verify_image(p_image, p_size);
}
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 05f251f778..23e8005991 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -1065,7 +1065,8 @@ int fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
#endif
#ifdef CONFIG_TI_SECURE_DEVICE
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+ size_t *p_size)
{
secure_boot_verify_image(p_image, p_size);
}
diff --git a/common/image-fit.c b/common/image-fit.c
index e614643fe3..0c5a05948d 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -2143,7 +2143,7 @@ int fit_image_load(bootm_headers_t *images, ulong addr,
/* perform any post-processing on the image data */
if (!host_build() && IS_ENABLED(CONFIG_FIT_IMAGE_POST_PROCESS))
- board_fit_image_post_process(&buf, &size);
+ board_fit_image_post_process(fit, noffset, &buf, &size);
len = (ulong)size;
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index caddf51196..57d621d5b3 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -320,7 +320,7 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
}
if (CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS))
- board_fit_image_post_process(&src, &length);
+ board_fit_image_post_process(fit, node, &src, &length);
load_ptr = map_sysmem(load_addr, length);
if (IS_ENABLED(CONFIG_SPL_GZIP) && image_comp == IH_COMP_GZIP) {
diff --git a/include/image.h b/include/image.h
index 459685d4d4..0c24bf6f35 100644
--- a/include/image.h
+++ b/include/image.h
@@ -1581,11 +1581,14 @@ int board_fit_config_name_match(const char *name);
* into the FIT creation (i.e. the binary blobs would have been pre-processed
* before being added to the FIT image).
*
+ * @fit: pointer to fit image
+ * @node: offset of image node
* @image: pointer to the image start pointer
* @size: pointer to the image size
* @return no return value (failure should be handled internally)
*/
-void board_fit_image_post_process(void **p_image, size_t *p_size);
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+ size_t *p_size);
#define FDT_ERROR ((ulong)(-1))
--
2.17.1
next prev parent reply other threads:[~2021-06-03 6:34 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-03 6:32 [PATCHv5 00/26] Re-base / re-post of TI-K3 HSM rearch series Tero Kristo
2021-06-03 6:32 ` [PATCHv5 01/26] lib: rational: copy the rational fraction lib routines from Linux Tero Kristo
2021-06-03 6:32 ` [PATCHv5 02/26] arm: mach-k3: introduce new config option for sysfw split Tero Kristo
2021-06-03 6:32 ` [PATCHv5 03/26] remoteproc: k3-r5: remove sysfw PM calls if not supported Tero Kristo
2021-06-03 6:32 ` Tero Kristo [this message]
2021-06-09 10:33 ` [PATCHv5 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset Tero Kristo
2021-06-03 6:32 ` [PATCHv5 05/26] clk: fixed_rate: add API for directly registering fixed rate clocks Tero Kristo
2021-06-03 6:32 ` [PATCHv5 06/26] clk: fix clock tree dump to properly dump out every registered clock Tero Kristo
2021-06-03 6:32 ` [PATCHv5 07/26] clk: do not attempt to fetch clock pointer with null device Tero Kristo
2021-06-03 6:32 ` [PATCHv5 08/26] clk: add support for setting clk rate from cmdline Tero Kristo
2021-06-03 6:32 ` [PATCHv5 09/26] clk: sci-clk: fix return value of set_rate Tero Kristo
2021-06-03 6:32 ` [PATCHv5 10/26] clk: fix assigned-clocks to pass with deferring provider Tero Kristo
2021-06-03 6:32 ` [PATCHv5 11/26] clk: fix set_rate to clean up cached rates for the hierarchy Tero Kristo
2021-06-03 6:32 ` [PATCHv5 12/26] clk: add support for TI K3 SoC PLL Tero Kristo
2021-06-03 6:32 ` [PATCHv5 13/26] clk: add support for TI K3 SoC clocks Tero Kristo
2021-06-03 6:32 ` [PATCHv5 14/26] power: domain: Introduce driver for raw TI K3 PDs Tero Kristo
2021-06-03 6:32 ` [PATCHv5 15/26] cmd: ti: pd: Add debug command for K3 power domains Tero Kristo
2021-06-03 6:32 ` [PATCHv5 16/26] tools: k3_fit_atf: add DM binary to the FIT image Tero Kristo
2021-06-03 6:32 ` [PATCHv5 17/26] arm: mach-k3: Add platform data for j721e and j7200 Tero Kristo
2021-06-03 6:32 ` [PATCHv5 18/26] arm: mach-k3: add support for detecting firmware images from FIT Tero Kristo
2021-06-03 6:32 ` [PATCHv5 19/26] arm: mach-k3: do board config for PM only if supported Tero Kristo
2021-06-03 6:32 ` [PATCHv5 20/26] arm: mach-k3: common: Drop main r5 start Tero Kristo
2021-06-03 6:32 ` [PATCHv5 21/26] arm: mach-k3: sysfw-loader: pass boardcfg to sciserver Tero Kristo
2021-06-03 6:32 ` [PATCHv5 22/26] arm: mach-k3: j721e_init: Force early probe of clk-k3 driver Tero Kristo
2021-06-03 6:32 ` [PATCHv5 23/26] configs: j721e_evm_r5: Enable raw access power management features Tero Kristo
2021-06-03 6:32 ` [PATCHv5 24/26] configs: j7200_evm_r5: " Tero Kristo
2021-06-03 6:32 ` [PATCHv5 25/26] board: ti: j72xx: README: update build instructions and image formats Tero Kristo
2021-06-03 6:32 ` [PATCHv5 26/26] arm: dts: k3-j72xx: correct MCU timer1 frequency Tero Kristo
2021-06-07 11:22 ` [PATCHv5 00/26] Re-base / re-post of TI-K3 HSM rearch series Lokesh Vutla
2021-06-08 6:27 ` Tero Kristo
2021-06-08 6:32 ` Lokesh Vutla
2021-06-08 6:43 ` Tero Kristo
2021-06-09 16:59 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210603063255.5483-5-kristo@kernel.org \
--to=kristo@kernel.org \
--cc=lokeshvutla@ti.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox