public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Cc: biju.das.jz@bp.renesas.com, aford@beaconembedded.com,
	Adam Ford <aford173@gmail.com>
Subject: [PATCH V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash
Date: Thu,  3 Jun 2021 08:22:07 -0500	[thread overview]
Message-ID: <20210603132207.9469-1-aford173@gmail.com> (raw)

There is a QSPI NOR flash part on the board.  Because this chip isn't
yet supported in Linux, but it is supported in U-Boot, and the
face that the RPC_SPI compatible names are different in U-Boot and
Linux, the device tree updates are confined to -u-boot.dtsi files.

In order to use the QSPI, TF-A must leave RPC unlocked by compiling
TF-A with RZG_RPC_HYPERFLASH_LOCKED=0.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Biju Bas <biju.das.jz@bp.renesas.com>
---
V2:  Add note to commit message about TF-A
     No functional changes

diff --git a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi
index a0c0a7f35c..06271537b7 100644
--- a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi
+++ b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit-u-boot.dtsi
@@ -4,11 +4,19 @@
  */
 
 / {
+	aliases {
+		spi0 = &rpc;
+	};
+
 	soc {
 		u-boot,dm-pre-reloc;
 	};
 };
 
+&avb {
+	phy-mode = "rgmii-txid";
+};
+
 &cpg {
 	u-boot,dm-pre-reloc;
 };
@@ -25,6 +33,25 @@
 	u-boot,dm-pre-reloc;
 };
 
+&rpc {
+	compatible = "renesas,rcar-gen3-rpc";
+	num-cs = <1>;
+	spi-max-frequency = <40000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
 &sdhi0 {
 	/delete-property/ cd-gpios;
 };
diff --git a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi
index a0c0a7f35c..be0ce54e55 100644
--- a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi
+++ b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit-u-boot.dtsi
@@ -4,6 +4,10 @@
  */
 
 / {
+	aliases {
+		spi0 = &rpc;
+	};
+
 	soc {
 		u-boot,dm-pre-reloc;
 	};
@@ -25,6 +29,25 @@
 	u-boot,dm-pre-reloc;
 };
 
+&rpc {
+	compatible = "renesas,rcar-gen3-rpc";
+	num-cs = <1>;
+	spi-max-frequency = <40000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
 &sdhi0 {
 	/delete-property/ cd-gpios;
 };
diff --git a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi
index eef200af2d..228391e0df 100644
--- a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi
+++ b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit-u-boot.dtsi
@@ -4,6 +4,10 @@
  */
 
 / {
+	aliases {
+		spi0 = &rpc;
+	};
+
 	soc {
 		u-boot,dm-pre-reloc;
 	};
@@ -25,6 +29,25 @@
 	u-boot,dm-pre-reloc;
 };
 
+&rpc {
+	compatible = "renesas,rcar-gen3-rpc";
+	num-cs = <1>;
+	spi-max-frequency = <40000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
 &sdhi0 {
 	/delete-property/ cd-gpios;
 	sd-uhs-sdr12;
diff --git a/configs/r8a774a1_beacon_defconfig b/configs/r8a774a1_beacon_defconfig
index 4a87a9a31f..c115f548a3 100644
--- a/configs/r8a774a1_beacon_defconfig
+++ b/configs/r8a774a1_beacon_defconfig
@@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_PART=y
+CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
@@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_BITBANGMII=y
 CONFIG_PHY_REALTEK=y
 CONFIG_DM_ETH=y
@@ -56,6 +62,9 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_SCIF_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_RENESAS_RPC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
diff --git a/configs/r8a774b1_beacon_defconfig b/configs/r8a774b1_beacon_defconfig
index 2c31222525..fe7bac048a 100644
--- a/configs/r8a774b1_beacon_defconfig
+++ b/configs/r8a774b1_beacon_defconfig
@@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_PART=y
+CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
@@ -48,6 +50,10 @@ CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
 CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_BITBANGMII=y
 CONFIG_PHY_REALTEK=y
@@ -61,6 +67,9 @@ CONFIG_SCIF_CONSOLE=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_RENESAS_RPC_SPI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_RENESAS_RPC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
diff --git a/configs/r8a774e1_beacon_defconfig b/configs/r8a774e1_beacon_defconfig
index a814d6ad63..37097b0088 100644
--- a/configs/r8a774e1_beacon_defconfig
+++ b/configs/r8a774e1_beacon_defconfig
@@ -18,7 +18,9 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_PART=y
+CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
@@ -47,6 +49,10 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_BITBANGMII=y
 CONFIG_PHY_REALTEK=y
 CONFIG_DM_ETH=y
@@ -56,6 +62,9 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_SCIF_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_RENESAS_RPC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
-- 
2.17.1


             reply	other threads:[~2021-06-03 13:22 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-03 13:22 Adam Ford [this message]
2021-08-23 12:23 ` [PATCH V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash Adam Ford
2021-08-23 13:50   ` Marek Vasut
2021-08-23 15:40     ` Adam Ford
2021-08-23 21:45       ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210603132207.9469-1-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=aford@beaconembedded.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox