From: "Marek Behún" <marek.behun@nic.cz>
To: Stefan Roese <sr@denx.de>, u-boot@lists.denx.de
Cc: "Pali Rohár" <pali@kernel.org>
Subject: Re: [PATCH u-boot-marvell 2/7] arm: mvebu: turris_mox: add support for board rescue mode
Date: Thu, 3 Jun 2021 17:18:51 +0200 [thread overview]
Message-ID: <20210603171851.0394786f@dellmb> (raw)
In-Reply-To: <20210602171001.29614-3-marek.behun@nic.cz>
On Wed, 2 Jun 2021 19:09:56 +0200
Marek Behún <marek.behun@nic.cz> wrote:
> +#define TURRIS_MOX_BOOTCMD_RESCUE \
> + "setenv bootargs \"console=ttyMV0,115200 " \
> + "earlycon=ar3700_uart,0xd0012000\" && " \
> + "sf probe && " \
> + "sf read ${kernel_addr_r} 0x190000 && " \
> + "lzmadec ${kernel_addr_r} ${ramdisk_addr_r} && " \
> + "bootm ${ramdisk_addr_r}"
OMG, we should use constants for addresses here instead of
${kernel_addr_r} and ${ramdisk_addr_r}, in case user changes or removed
this variables.
I will update this in v2.
> +
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "scriptaddr=0x4d00000\0" \
> "pxefile_addr_r=0x4e00000\0" \
> "fdt_addr_r=0x4f00000\0" \
> "kernel_addr_r=0x5000000\0" \
> "ramdisk_addr_r=0x8000000\0" \
> + "bootcmd_rescue=" TURRIS_MOX_BOOTCMD_RESCUE "\0" \
> BOOTENV
>
> #endif /* _CONFIG_TURRIS_MOX_H */
next prev parent reply other threads:[~2021-06-03 15:19 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 17:09 [PATCH u-boot-marvell 0/7] Changes for Turris MOX Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 1/7] arm: mvebu: dts: turris_mox: add button and LED nodes Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 2/7] arm: mvebu: turris_mox: add support for board rescue mode Marek Behún
2021-06-03 15:18 ` Marek Behún [this message]
2021-06-02 17:09 ` [PATCH u-boot-marvell 3/7] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 4/7] arm: mvebu: configs: turris_mox: add fdtfile default env variable Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 5/7] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions Marek Behún
2021-06-02 17:10 ` [PATCH u-boot-marvell 6/7] arm: mvebu: turris_mox: enable options for Turris network boot Marek Behún
2021-06-02 17:10 ` [PATCH u-boot-marvell 7/7] arm64: a37xx: dts: rename internal-regs node Marek Behún
2021-06-03 15:20 ` Marek Behún
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 0/6] Changes for Turris MOX Marek Behún
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 1/6] arm: mvebu: dts: turris_mox: add button and LED nodes Marek Behún
2021-06-08 9:47 ` Pali Rohár
2021-06-10 5:06 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 2/6] arm: mvebu: turris_mox: add support for board rescue mode Marek Behún
2021-06-08 9:48 ` Pali Rohár
2021-06-10 5:09 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 3/6] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue Marek Behún
2021-06-08 9:49 ` Pali Rohár
2021-06-10 5:09 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 4/6] arm: mvebu: configs: turris_mox: add fdtfile default env variable Marek Behún
2021-06-08 9:50 ` Pali Rohár
2021-06-10 5:10 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions Marek Behún
2021-06-08 9:51 ` Pali Rohár
2021-06-10 5:12 ` Stefan Roese
2021-06-10 14:07 ` Pali Rohár
2021-06-10 14:28 ` Marek Behun
2021-06-11 4:14 ` Stefan Roese
2021-06-10 5:11 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 6/6] arm: mvebu: turris_mox: enable options for Turris network boot Marek Behún
2021-06-08 9:52 ` Pali Rohár
2021-06-10 5:11 ` Stefan Roese
2021-06-10 7:54 ` [PATCH u-boot-marvell v2 0/6] Changes for Turris MOX Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210603171851.0394786f@dellmb \
--to=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox