[PATCH] arm: iproc: Add higher speed configurations

[Chris Packham <judge.packham@gmail.com>]

Add support for 1.3GHz, 1.35GHz and 1.4GHz parts. This is based on
equivalent code in Broadcom's LDK 5.0.6.

Signed-off-by: Chris Packham <judge.packham@gmail.com>

---
As Broadcom are currently migrating users to the BCM58525BB1KF14G part
I suspect others may want this. In our case because we wanted to still
run at 1.2GHz we also had to set CONFIG_ARMCLK to 1200.

 arch/arm/cpu/armv7/iproc-common/armpll.c | 29 +++++++++++++-----------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/arch/arm/cpu/armv7/iproc-common/armpll.c b/arch/arm/cpu/armv7/iproc-common/armpll.c
index efa3d9e5a9bd..8c3a323f0654 100644
--- a/arch/arm/cpu/armv7/iproc-common/armpll.c
+++ b/arch/arm/cpu/armv7/iproc-common/armpll.c
@@ -19,19 +19,22 @@ struct armpll_parameters {
 };
 
 struct armpll_parameters armpll_clk_tab[] = {
-	{   25, 64,      1, 1, 0},
-	{  100, 64,      1, 1, 2},
-	{  400, 64,      1, 1, 6},
-	{  448, 71, 713050, 1, 6},
-	{  500, 80,      1, 1, 6},
-	{  560, 89, 629145, 1, 6},
-	{  600, 96,      1, 1, 6},
-	{  800, 64,      1, 1, 7},
-	{  896, 71, 713050, 1, 7},
-	{ 1000, 80,      1, 1, 7},
-	{ 1100, 88,      1, 1, 7},
-	{ 1120, 89, 629145, 1, 7},
-	{ 1200, 96,      1, 1, 7},
+	{   25,  64,      1, 1, 0},
+	{  100,  64,      1, 1, 2},
+	{  400,  64,      1, 1, 6},
+	{  448,  71, 713050, 1, 6},
+	{  500,  80,      1, 1, 6},
+	{  560,  89, 629145, 1, 6},
+	{  600,  96,      1, 1, 6},
+	{  800,  64,      1, 1, 7},
+	{  896,  71, 713050, 1, 7},
+	{ 1000,  80,      1, 1, 7},
+	{ 1100,  88,      1, 1, 7},
+	{ 1120,  89, 629145, 1, 7},
+	{ 1200,  96,      1, 1, 7},
+	{ 1300, 104,      1, 1, 7},
+	{ 1350, 108,      1, 1, 7},
+	{ 1400, 112,      1, 1, 7},
 };
 
 uint32_t armpll_config(uint32_t clkmhz)
-- 
2.31.1