[PATCH v1 1/3] lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX

[Trevor Woerner <twoerner@gmail.com>]

There's nothing special or unique to the lpc32xx that requires its own config
parameter for specifying the console uart index. Therefore instead of using
the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the
already-available CONFIG_CONS_INDEX from Kconfig.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
---

 arch/arm/include/asm/arch-lpc32xx/config.h       | 4 ++--
 arch/arm/mach-lpc32xx/devices.c                  | 3 +--
 board/timll/devkit3250/devkit3250.c              | 2 +-
 board/timll/devkit3250/devkit3250_spl.c          | 2 +-
 board/work-microwave/work_92105/work_92105.c     | 2 +-
 board/work-microwave/work_92105/work_92105_spl.c | 2 +-
 configs/devkit3250_defconfig                     | 2 ++
 configs/work_92105_defconfig                     | 2 ++
 include/configs/devkit3250.h                     | 5 -----
 include/configs/work_92105.h                     | 5 -----
 scripts/config_whitelist.txt                     | 1 -
 11 files changed, 11 insertions(+), 19 deletions(-)

diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index 0836091af2..45e46f9946 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -12,8 +12,8 @@
 /* Basic CPU architecture */
 
 /* UART configuration */
-#if	(CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
-	(CONFIG_SYS_LPC32XX_UART == 7)
+#if	(CONFIG_CONS_INDEX == 1) || (CONFIG_CONS_INDEX == 2) || \
+	(CONFIG_CONS_INDEX == 7)
 #if !defined(CONFIG_LPC32XX_HSUART)
 #define CONFIG_LPC32XX_HSUART
 #endif
diff --git a/arch/arm/mach-lpc32xx/devices.c b/arch/arm/mach-lpc32xx/devices.c
index e1e2e0d094..0a4fef295a 100644
--- a/arch/arm/mach-lpc32xx/devices.c
+++ b/arch/arm/mach-lpc32xx/devices.c
@@ -23,8 +23,7 @@ void lpc32xx_uart_init(unsigned int uart_id)
 		return;
 
 	/* Disable loopback mode, if it is set by S1L bootloader */
-	clrbits_le32(&ctrl->loop,
-		     UART_LOOPBACK(CONFIG_SYS_LPC32XX_UART));
+	clrbits_le32(&ctrl->loop, UART_LOOPBACK(uart_id));
 
 	if (uart_id < 3 || uart_id > 6)
 		return;
diff --git a/board/timll/devkit3250/devkit3250.c b/board/timll/devkit3250/devkit3250.c
index 3c744b943f..9d4ffb0f97 100644
--- a/board/timll/devkit3250/devkit3250.c
+++ b/board/timll/devkit3250/devkit3250.c
@@ -38,7 +38,7 @@ void reset_periph(void)
 
 int board_early_init_f(void)
 {
-	lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
+	lpc32xx_uart_init(CONFIG_CONS_INDEX);
 	lpc32xx_i2c_init(1);
 	lpc32xx_i2c_init(2);
 	lpc32xx_ssp_init();
diff --git a/board/timll/devkit3250/devkit3250_spl.c b/board/timll/devkit3250/devkit3250_spl.c
index 47af78ae0b..12e8ae9c39 100644
--- a/board/timll/devkit3250/devkit3250_spl.c
+++ b/board/timll/devkit3250/devkit3250_spl.c
@@ -49,7 +49,7 @@ void spl_board_init(void)
 	/* First of all silence buzzer controlled by GPO_20 */
 	writel((1 << 20), &gpio->p3_outp_clr);
 
-	lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
+	lpc32xx_uart_init(CONFIG_CONS_INDEX);
 	preloader_console_init();
 
 	ddr_init(&dram_64mb);
diff --git a/board/work-microwave/work_92105/work_92105.c b/board/work-microwave/work_92105/work_92105.c
index bdcecff730..5d12f84cfe 100644
--- a/board/work-microwave/work_92105/work_92105.c
+++ b/board/work-microwave/work_92105/work_92105.c
@@ -37,7 +37,7 @@ void reset_periph(void)
 int board_early_init_f(void)
 {
 	/* initialize serial port for console */
-	lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
+	lpc32xx_uart_init(CONFIG_CONS_INDEX);
 	/* enable I2C, SSP, MAC, NAND */
 	lpc32xx_i2c_init(1); /* only I2C1 has devices, I2C2 has none */
 	lpc32xx_ssp_init();
diff --git a/board/work-microwave/work_92105/work_92105_spl.c b/board/work-microwave/work_92105/work_92105_spl.c
index a31553a2d2..d9401145f2 100644
--- a/board/work-microwave/work_92105/work_92105_spl.c
+++ b/board/work-microwave/work_92105/work_92105_spl.c
@@ -58,7 +58,7 @@ const struct emc_dram_settings dram_128mb = {
 void spl_board_init(void)
 {
 	/* initialize serial port for console */
-	lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
+	lpc32xx_uart_init(CONFIG_CONS_INDEX);
 	/* initialize console */
 	preloader_console_init();
 	/* init DDR and NAND to chainload U-Boot */
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 93c048cee8..9ae70f7d46 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -51,6 +51,8 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ADDR=31
 CONFIG_PHY_SMSC=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_CONS_INDEX=5
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_USB=y
diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
index c3f666dcfe..e9605adedd 100644
--- a/configs/work_92105_defconfig
+++ b/configs/work_92105_defconfig
@@ -48,5 +48,7 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_SMSC=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_CONS_INDEX=5
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 5d2b77b4a3..921a38c01e 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -30,11 +30,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_4K \
 					 - GENERATED_GBL_DATA_SIZE)
 
-/*
- * Serial Driver
- */
-#define CONFIG_SYS_LPC32XX_UART		5   /* UART5 */
-
 /*
  * DMA
  */
diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index 7874b77f3f..076a1b065e 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -35,11 +35,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_512K \
 					 - GENERATED_GBL_DATA_SIZE)
 
-/*
- * Serial Driver
- */
-#define CONFIG_SYS_LPC32XX_UART		5   /* UART5 - NS16550 */
-
 /*
  * Ethernet Driver
  */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 8f92b82719..00a58d65fc 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2737,7 +2737,6 @@ CONFIG_SYS_LOW
 CONFIG_SYS_LOWMEM_BASE
 CONFIG_SYS_LOW_RES_TIMER
 CONFIG_SYS_LPAE_SDRAM_BASE
-CONFIG_SYS_LPC32XX_UART
 CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
 CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH
 CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS
-- 
2.30.0.rc0