From: Lukasz Majewski <lukma@denx.de>
To: Patrick DELAUNAY <patrick.delaunay@foss.st.com>
Cc: Patrice CHOTARD <patrice.chotard@foss.st.com>,
<u-boot@lists.denx.de>,
U-Boot STM32 <uboot-stm32@st-md-mailman.stormreply.com>,
Marek Vasut <marex@denx.de>
Subject: Re: [Uboot-stm32] [PATCH] dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devices
Date: Mon, 7 Jun 2021 10:39:46 +0200 [thread overview]
Message-ID: <20210607103946.5e235a20@ktm> (raw)
In-Reply-To: <0616d868-1939-e0dc-3d3a-8e4b150a95e9@foss.st.com>
[-- Attachment #1: Type: text/plain, Size: 2666 bytes --]
Hi Patrick,
> Thanks Patrice,
>
> On 4/20/21 12:24 PM, Patrice CHOTARD wrote:
> > Hi Patrick
> >
> > On 3/4/21 5:47 PM, Patrick Delaunay wrote:
> >> For NOR devices the logical DFU buffer size is the sector_size,
> >> as it is done in dfu_sf.c or in spi/sf_mtd.c
> >> (sf_mtd_info.erasesize = flash->sector_size)
> >>
> >> For NAND the DFU size was already limited to erasesize as
> >> has_pages = true.
> >>
> >> So the mtd dfu backend can use this erasesize for all the MTD
> >> devices, NOR and NAND with dfu->max_buf_size = mtd->erasesize
> >>
> >> This difference was initially copied from MTD command, where
> >> data is fully available in RAM without size limitation.
> >>
> >> This patch avoids to have many sector write in dfu_mtd.c at the end
> >> of the DFU transfer and avoids issues with USB timeout or WATCHDOG.
> >>
> >> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> >> ---
> >>
> >> drivers/dfu/dfu_mtd.c | 5 +----
> >> 1 file changed, 1 insertion(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/dfu/dfu_mtd.c b/drivers/dfu/dfu_mtd.c
> >> index ca67585a7e..7efb3cbd79 100644
> >> --- a/drivers/dfu/dfu_mtd.c
> >> +++ b/drivers/dfu/dfu_mtd.c
> >> @@ -252,7 +252,6 @@ int dfu_fill_entity_mtd(struct dfu_entity
> >> *dfu, char *devstr, char *s) {
> >> char *st;
> >> struct mtd_info *mtd;
> >> - bool has_pages;
> >> int ret, part;
> >>
> >> mtd = get_mtd_device_nm(devstr);
> >> @@ -262,9 +261,7 @@ int dfu_fill_entity_mtd(struct dfu_entity
> >> *dfu, char *devstr, char *s)
> >> dfu->dev_type = DFU_DEV_MTD;
> >> dfu->data.mtd.info = mtd;
> >> -
> >> - has_pages = mtd->type == MTD_NANDFLASH || mtd->type ==
> >> MTD_MLCNANDFLASH;
> >> - dfu->max_buf_size = has_pages ? mtd->erasesize : 0;
> >> + dfu->max_buf_size = mtd->erasesize;
> >>
> >> st = strsep(&s, " ");
> >> if (!strcmp(st, "raw")) {
> >>
> > Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> >
> > Thanks
> >
> > Patrice
>
>
> Lukasz, any remarks on your side?
>
>
> Can I take this patch in my first STM32 pull request for v2020.10 ?
Please pull it to your tree.
>
> or a PR is already planed on your side ?
>
> http://patchwork.ozlabs.org/project/uboot/patch/20210304174748.1.I1d824180669d63e22275f082e7ac0fe50c2b8646@changeid/
>
>
> Regards
>
> Patrick
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2021-06-07 8:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-04 16:47 [PATCH] dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devices Patrick Delaunay
2021-04-20 10:24 ` [Uboot-stm32] " Patrice CHOTARD
2021-06-04 16:59 ` Patrick DELAUNAY
2021-06-07 8:39 ` Lukasz Majewski [this message]
2021-06-18 8:10 ` Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210607103946.5e235a20@ktm \
--to=lukma@denx.de \
--cc=marex@denx.de \
--cc=patrice.chotard@foss.st.com \
--cc=patrick.delaunay@foss.st.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-stm32@st-md-mailman.stormreply.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox