From: sbabic@denx.de
To: Giulio Benetti <giulio.benetti@benettiengineering.com>,
U-Boot@lists.denx.de
Subject: [PATCH v3 18/22] video: mxsfb: add enabling of "disp_axi" clock
Date: Wed, 9 Jun 2021 15:44:16 +0200 (CEST) [thread overview]
Message-ID: <20210609134416.25B6382FCB@phobos.denx.de> (raw)
In-Reply-To: <20210513101851.11223-19-giulio.benetti@benettiengineering.com>
> Some SoC needs "disp_axi" clock to be enabled, so let's try to retrieve it
> and enabling. If it fails it gives only a debug(), but this clock as well
> as "axi" clock is not mandatory.
> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
next prev parent reply other threads:[~2021-06-09 13:48 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-12 23:03 [PATCH 0/5] Fix i.MXRT1050 hang on lcdif init and improve DT for mxsfb Giulio Benetti
2021-04-12 23:03 ` [PATCH 1/5] video: mxsfb: add enabling of "axi" clock other than "per" clock Giulio Benetti
2021-04-12 23:03 ` [PATCH 2/5] video: mxsfb: add enabling of "disp_axi" clock Giulio Benetti
2021-04-12 23:03 ` [PATCH 3/5] clk: imx: clk-imxrt1050: introduce LCDIF_PIX and rename LCDIF to LCDIF_APB Giulio Benetti
2021-04-12 23:03 ` [PATCH 4/5] ARM: dts: imxrt1050: move lcdif assigned clock to dtsi Giulio Benetti
2021-04-12 23:03 ` [PATCH 5/5] ARM: dts: imxrt1050: set lcdif clocks according to mxsfb driver Giulio Benetti
2021-04-12 23:05 ` [PATCH 0/5] Fix i.MXRT1050 hang on lcdif init and improve DT for mxsfb Giulio Benetti
2021-05-01 23:44 ` Giulio Benetti
2021-05-12 22:12 ` Giulio Benetti
2021-05-13 8:14 ` Stefano Babic
2021-05-13 9:09 ` [PATCH v3 00/22] Fix i.MXRT1020/50 Giulio Benetti
2021-05-13 10:18 ` Giulio Benetti
2021-05-13 10:18 ` [PATCH v3 01/22] arm: imxrt: soc: make mpu regions generic Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:18 ` [PATCH v3 02/22] timer: imx-gpt: Add timer support for i.MX SoCs family Giulio Benetti
2021-06-09 13:44 ` sbabic
2021-05-13 10:18 ` [PATCH v3 03/22] ARM: dts: imxrt1020: add node label to osc Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:18 ` [PATCH v3 04/22] ARM: dts: imxrt1020: add gpt1 node Giulio Benetti
2021-06-09 13:44 ` sbabic
2021-05-13 10:18 ` [PATCH v3 05/22] ARM: dts: imxrt1020-evk: enable gpt1 timer Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:18 ` [PATCH v3 06/22] ARM: dts: imxrt1020-evk: set gpt1 as tick-timer for u-boot Giulio Benetti
2021-06-09 13:42 ` sbabic
2021-05-13 10:18 ` [PATCH v3 07/22] ARM: dts: imxrt1020-evk-u-boot: make gpt1 present for SPL Giulio Benetti
2021-06-09 13:42 ` sbabic
2021-05-13 10:18 ` [PATCH v3 08/22] ARM: dts: imxrt1020-evk: add device_type = "memory" to memory node Giulio Benetti
2021-06-09 13:44 ` sbabic
2021-05-13 10:18 ` [PATCH v3 09/22] configs: imxrt1020-evk: enable imx gpt timer as tick-timer Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:18 ` [PATCH v3 10/22] ARM: dts: imxrt1050: add node label to osc Giulio Benetti
2021-06-09 13:42 ` sbabic
2021-05-13 10:18 ` [PATCH v3 11/22] ARM: dts: imxrt1050: add gpt1 node Giulio Benetti
2021-06-09 13:44 ` sbabic
2021-05-13 10:18 ` [PATCH v3 12/22] ARM: dts: imxrt1050-evk: enable gpt1 timer Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:18 ` [PATCH v3 13/22] ARM: dts: imxrt1050-evk: set gpt1 as tick-timer for u-boot Giulio Benetti
2021-06-09 13:44 ` sbabic
2021-05-13 10:18 ` [PATCH v3 14/22] ARM: dts: imxrt1050-evk-u-boot: make gpt1 present for SPL Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:18 ` [PATCH v3 15/22] ARM: dts: imxrt1050-evk: add device_type = "memory" to memory node Giulio Benetti
2021-06-09 13:42 ` sbabic
2021-05-13 10:18 ` [PATCH v3 16/22] configs: imxrt1050-evk: enable imx gpt timer as tick-timer Giulio Benetti
2021-06-09 13:42 ` sbabic
2021-05-13 10:18 ` [PATCH v3 17/22] video: mxsfb: add enabling of "axi" clock other than "per" clock Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:18 ` [PATCH v3 18/22] video: mxsfb: add enabling of "disp_axi" clock Giulio Benetti
2021-06-09 13:44 ` sbabic [this message]
2021-05-13 10:19 ` Giulio Benetti
2021-05-13 10:19 ` [PATCH v3 19/22] clk: imx: clk-imxrt1050: introduce LCDIF_PIX and rename LCDIF to LCDIF_APB Giulio Benetti
2021-06-09 13:44 ` sbabic
2021-05-13 10:19 ` [PATCH v3 20/22] ARM: dts: imxrt1050: move lcdif assigned clock to dtsi Giulio Benetti
2021-06-09 13:44 ` sbabic
2021-05-13 10:19 ` [PATCH v3 21/22] ARM: dts: imxrt1050: set lcdif clocks according to mxsfb driver Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:19 ` [PATCH v3 22/22] ARM: dts: imxrt1050-evk: remove u-boot,dm-spl Giulio Benetti
2021-06-09 13:43 ` sbabic
2021-05-13 10:21 ` [PATCH v3 18/22] video: mxsfb: add enabling of "disp_axi" clock Giulio Benetti
2021-05-13 10:26 ` [PATCH 0/5] Fix i.MXRT1050 hang on lcdif init and improve DT for mxsfb Giulio Benetti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210609134416.25B6382FCB@phobos.denx.de \
--to=sbabic@denx.de \
--cc=U-Boot@lists.denx.de \
--cc=giulio.benetti@benettiengineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox