Re: [PATCH 2/3] arm: mvebu: turris_mox: Enable SATA support

Stefan Roese
2021-08-16T06:59:00Z

> SATA disks could be connected via mPCIe add-in card with PCIe-SATA
> controller into Mox-B or Mox-G module.
>
> Signed-off-by: Pali Rohár <pali@kernel.org>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
> configs/turris_mox_defconfig | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig
> index c19b8379c32a..fc5e1fc3766f 100644
> --- a/configs/turris_mox_defconfig
> +++ b/configs/turris_mox_defconfig
> @@ -12,6 +12,7 @@ CONFIG_DM_GPIO=y
> CONFIG_DEFAULT_DEVICE_TREE="armada-3720-turris-mox"
> CONFIG_DEBUG_UART_BASE=0xd0012000
> CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
> CONFIG_OF_BOARD_FIXUP=y
> CONFIG_DISTRO_DEFAULTS=y
> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> @@ -32,6 +33,7 @@ CONFIG_CMD_I2C=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_MTD=y
> CONFIG_CMD_PCI=y
> +CONFIG_CMD_SATA=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_USB=y
> CONFIG_CMD_WDT=y
> @@ -47,6 +49,8 @@ CONFIG_MAC_PARTITION=y
> CONFIG_ENV_OVERWRITE=y
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
> CONFIG_BUTTON=y
> CONFIG_BUTTON_GPIO=y
> CONFIG_CLK=y
> @@ -81,6 +85,8 @@ CONFIG_PINCTRL_ARMADA_37XX=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_RTC=y
> CONFIG_RTC_DS1307=y
> +CONFIG_SCSI=y
> +CONFIG_DM_SCSI=y
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_MVEBU_A3700_UART=y