public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Johan Jonker <jbx6244@gmail.com>
To: kever.yang@rock-chips.com
Cc: sjg@chromium.org, philipp.tomsich@vrull.eu, u-boot@lists.denx.de
Subject: [PATCH 2/2] doc: rockchip: write all brand names with a capital
Date: Fri, 20 Aug 2021 19:27:59 +0200	[thread overview]
Message-ID: <20210820172759.4088-2-jbx6244@gmail.com> (raw)
In-Reply-To: <20210820172759.4088-1-jbx6244@gmail.com>

Brand names are supposed to be written with a capital,
so change them all.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 doc/board/rockchip/rockchip.rst | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 8d75efc0..144cb98e 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -16,10 +16,10 @@ Rockchip boards
 Rockchip is SoC solutions provider for tablets & PCs, streaming media
 TV boxes, AI audio & vision, IoT hardware.
 
-A wide range of Rockchip SoCs with associated boardsare supported in
+A wide range of Rockchip SoCs with associated boards are supported in
 mainline U-Boot.
 
-List of mainline supported rockchip boards:
+List of mainline supported Rockchip boards:
 
 * rk3036
      - Rockchip Evb-RK3036 (evb-rk3036)
@@ -93,7 +93,7 @@ To build TF-A::
         make realclean
         make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
 
-Specify the PLAT= with desired rockchip platform to build TF-A for.
+Specify the PLAT= with desired Rockchip platform to build TF-A for.
 
 U-Boot
 ^^^^^^
@@ -130,7 +130,7 @@ Flashing
 SD Card
 ^^^^^^^
 
-All rockchip platforms, except rk3128 (which doesn't use SPL) are now
+All Rockchip platforms, except rk3128 (which doesn't use SPL) are now
 supporting single boot image using binman and pad_cat.
 
 To write an image that boots from an SD card (assumed to be /dev/sda)::
@@ -141,7 +141,7 @@ To write an image that boots from an SD card (assumed to be /dev/sda)::
 eMMC
 ^^^^
 
-eMMC flash would probe on mmc0 in most of the rockchip platforms.
+eMMC flash would probe on mmc0 in most of the Rockchip platforms.
 
 Create GPT partition layout as defined in configurations::
 
@@ -164,7 +164,7 @@ Program the flash::
         sudo fastboot -i 0x2207 flash loader1 idbloader.img
         sudo fastboot -i 0x2207 flash loader2 u-boot.itb
 
-Note: for rockchip 32-bit platforms the U-Boot proper image
+Note: for Rockchip 32-bit platforms the U-Boot proper image
 is u-boot-dtb.img
 
 SPI
@@ -227,8 +227,8 @@ Note:
 TODO
 ----
 
-- Add rockchip idbloader image building
-- Add rockchip TPL image building
+- Add Rockchip idbloader image building
+- Add Rockchip TPL image building
 - Document SPI flash boot
 - Add missing SoC's with it boards list
 
-- 
2.20.1


  reply	other threads:[~2021-08-20 17:33 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-20 17:27 [PATCH 1/2] doc: rockchip: sort rockchip support list for rk3188 Johan Jonker
2021-08-20 17:27 ` Johan Jonker [this message]
2021-10-15 12:50   ` [PATCH 2/2] doc: rockchip: write all brand names with a capital Kever Yang
2021-10-15 12:49 ` [PATCH 1/2] doc: rockchip: sort rockchip support list for rk3188 Kever Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210820172759.4088-2-jbx6244@gmail.com \
    --to=jbx6244@gmail.com \
    --cc=kever.yang@rock-chips.com \
    --cc=philipp.tomsich@vrull.eu \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox