From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Cc: sjg@chromium.org, trini@konsulko.com, Wolfgang Denk <wd@denx.de>,
Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Subject: [PATCH v6 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove
Date: Thu, 2 Sep 2021 17:00:19 +0200 [thread overview]
Message-ID: <20210902150019.1349263-4-sr@denx.de> (raw)
In-Reply-To: <20210902150019.1349263-1-sr@denx.de>
This patch enables the use of the optimized memset(), memmove() &
memcpy() versions recently added on ARM64.
Please note that these optimized functions are now only enabled for
recent GCC versions (>= 9.4), as earlier GCC versions throw these
errors:
aarch64-linux-ar: warning: arch/arm/lib/memset-arm64.o: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0000000
...
Signed-off-by: Stefan Roese <sr@denx.de>
---
Changes in v6:
- Add GCC version check >= 9.4 on ARM64, as earlier GCC versions throw
errors with this new code
Changes in v5:
- memmove is now auto-selected (or deselected) with the memcpy
Kconfig selection as it's entry is the same as memcpy for ARM64
Changes in v3:
- Add memmove as well
arch/arm/Kconfig | 39 +++++++++++++++++++++++++++++------
arch/arm/include/asm/string.h | 4 ++++
2 files changed, 37 insertions(+), 6 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7c2f97499b86..a1d8559e9e85 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -457,7 +457,7 @@ config ARM_CORTEX_CPU_IS_UP
config USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy"
default y
- depends on !ARM64
+ depends on !ARM64 || (ARM64 && (GCC_VERSION >= 90400))
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
@@ -466,7 +466,7 @@ config USE_ARCH_MEMCPY
config SPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for SPL"
default y if USE_ARCH_MEMCPY
- depends on !ARM64 && SPL
+ depends on SPL
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
@@ -475,16 +475,43 @@ config SPL_USE_ARCH_MEMCPY
config TPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for TPL"
default y if USE_ARCH_MEMCPY
- depends on !ARM64 && TPL
+ depends on TPL
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
but may increase the binary size.
+config USE_ARCH_MEMMOVE
+ bool "Use an assembly optimized implementation of memmove" if !ARM64
+ default USE_ARCH_MEMCPY if ARM64
+ depends on ARM64
+ help
+ Enable the generation of an optimized version of memmove.
+ Such an implementation may be faster under some conditions
+ but may increase the binary size.
+
+config SPL_USE_ARCH_MEMMOVE
+ bool "Use an assembly optimized implementation of memmove for SPL" if !ARM64
+ default SPL_USE_ARCH_MEMCPY if ARM64
+ depends on SPL && ARM64
+ help
+ Enable the generation of an optimized version of memmove.
+ Such an implementation may be faster under some conditions
+ but may increase the binary size.
+
+config TPL_USE_ARCH_MEMMOVE
+ bool "Use an assembly optimized implementation of memmove for TPL" if !ARM64
+ default TPL_USE_ARCH_MEMCPY if ARM64
+ depends on TPL && ARM64
+ help
+ Enable the generation of an optimized version of memmove.
+ Such an implementation may be faster under some conditions
+ but may increase the binary size.
+
config USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset"
default y
- depends on !ARM64
+ depends on !ARM64 || (ARM64 && (GCC_VERSION >= 90400))
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
@@ -493,7 +520,7 @@ config USE_ARCH_MEMSET
config SPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for SPL"
default y if USE_ARCH_MEMSET
- depends on !ARM64 && SPL
+ depends on SPL
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
@@ -502,7 +529,7 @@ config SPL_USE_ARCH_MEMSET
config TPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for TPL"
default y if USE_ARCH_MEMSET
- depends on !ARM64 && TPL
+ depends on TPL
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h
index 11eaa34fab8c..ead3f2c35643 100644
--- a/arch/arm/include/asm/string.h
+++ b/arch/arm/include/asm/string.h
@@ -19,7 +19,11 @@ extern char * strchr(const char * s, int c);
#endif
extern void * memcpy(void *, const void *, __kernel_size_t);
+#if CONFIG_IS_ENABLED(USE_ARCH_MEMMOVE)
+#define __HAVE_ARCH_MEMMOVE
+#else
#undef __HAVE_ARCH_MEMMOVE
+#endif
extern void * memmove(void *, const void *, __kernel_size_t);
#undef __HAVE_ARCH_MEMCHR
--
2.33.0
next prev parent reply other threads:[~2021-09-02 15:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-02 15:00 [PATCH v6 0/3] arm64: Add optimized memset/memcpy/memove functions Stefan Roese
2021-09-02 15:00 ` [PATCH v6 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy/memmove functions Stefan Roese
2021-09-24 14:14 ` Tom Rini
2021-09-02 15:00 ` [PATCH v6 2/3] arm64: memset-arm64: Use simple memset when cache is disabled Stefan Roese
2021-09-24 14:14 ` Tom Rini
2021-09-02 15:00 ` Stefan Roese [this message]
2021-09-23 19:56 ` [PATCH v6 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove Tom Rini
2021-09-24 7:21 ` Stefan Roese
2021-09-24 14:14 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210902150019.1349263-4-sr@denx.de \
--to=sr@denx.de \
--cc=rasmus.villemoes@prevas.dk \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox