From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Cc: marek.vasut+renesas@gmail.com, aford@beaconembedded.com,
Adam Ford <aford173@gmail.com>
Subject: [PATCH V2 2/6] ARM: rmobile: beacon: Support RZ/G2 [M/N/H] on TARGET_BEACON_RZG2M
Date: Mon, 20 Sep 2021 11:14:28 -0500 [thread overview]
Message-ID: <20210920161432.13110-2-aford173@gmail.com> (raw)
In-Reply-To: <20210920161432.13110-1-aford173@gmail.com>
The three different boards share the same board file and only differ
in terms of which SoC is being used. By enabling FIT on
TARGET_BEACON_RZG2M, it can support all three boards and elimate
duplicate code.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
arch/arm/mach-rmobile/Kconfig.64 | 8 ++++++++
configs/r8a774a1_beacon_defconfig | 3 +++
2 files changed, 11 insertions(+)
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index a6dcce180b..2bde898928 100644
--- a/arch/arm/mach-rmobile/Kconfig.64
+++ b/arch/arm/mach-rmobile/Kconfig.64
@@ -80,8 +80,14 @@ config TARGET_BEACON_RZG2H
config TARGET_BEACON_RZG2M
bool "Beacon EmbeddedWorks RZ/G2M Dev Kit"
select R8A774A1
+ select R8A774B1
+ select R8A774E1
select RZ_G2
select PINCTRL_PFC_R8A774A1
+ select PINCTRL_PFC_R8A774B1
+ select PINCTRL_PFC_R8A774E1
+ imply MULTI_DTB_FIT
+ imply MULTI_DTB_FIT_USER_DEFINED_AREA
config TARGET_BEACON_RZG2N
bool "Beacon EmbeddedWorks RZ/G2N Dev Kit"
@@ -177,11 +183,13 @@ source "board/hoperun/hihope-rzg2/Kconfig"
source "board/silinux/ek874/Kconfig"
config MULTI_DTB_FIT_UNCOMPRESS_SZ
+ default 0x80000 if TARGET_BEACON_RZG2M
default 0x80000 if TARGET_HIHOPE_RZG2
default 0x80000 if TARGET_SALVATOR_X
default 0x80000 if TARGET_ULCB
config MULTI_DTB_FIT_USER_DEF_ADDR
+ default 0x49000000 if TARGET_BEACON_RZG2M
default 0x49000000 if TARGET_HIHOPE_RZG2
default 0x49000000 if TARGET_SALVATOR_X
default 0x49000000 if TARGET_ULCB
diff --git a/configs/r8a774a1_beacon_defconfig b/configs/r8a774a1_beacon_defconfig
index 7ba4ac05f5..11c99d4850 100644
--- a/configs/r8a774a1_beacon_defconfig
+++ b/configs/r8a774a1_beacon_defconfig
@@ -31,6 +31,9 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_CONTROL=y
+CONFIG_OF_LIST="r8a774a1-beacon-rzg2m-kit r8a774b1-beacon-rzg2n-kit r8a774e1-beacon-rzg2h-kit"
+CONFIG_MULTI_DTB_FIT_LZO=y
+CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_MMC_ENV_DEV=1
--
2.25.1
next prev parent reply other threads:[~2021-09-20 16:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-20 16:14 [PATCH V2 1/6] ARM: rmobile: Enable board detection when FIT is enabled Adam Ford
2021-09-20 16:14 ` Adam Ford [this message]
2021-09-20 16:14 ` [PATCH V2 3/6] ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/H Adam Ford
2021-09-20 16:14 ` [PATCH V2 4/6] ARM: rmobile: Beacon: Remove dead code Adam Ford
2021-09-20 16:14 ` [PATCH V2 5/6] ARM: rmobile: beacon: Enable reference clocks for USB and AVB Adam Ford
2021-09-20 16:14 ` [PATCH V2 6/6] ARM: rmobile: Rename r8a774a1_beacon_defconfig to rzg2_beacon_defconfig Adam Ford
2021-10-05 12:35 ` [PATCH V2 1/6] ARM: rmobile: Enable board detection when FIT is enabled Adam Ford
2021-10-29 18:53 ` Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210920161432.13110-2-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=marek.vasut+renesas@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox