From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, pali@kernel.org,
"Chris Packham" <judge.packham@gmail.com>,
"Baruch Siach" <baruch@tkos.co.il>,
"Dennis Gilmore" <dgilmore@redhat.com>,
"Mario Six" <mario.six@gdsys.cc>,
"Jon Nettleton" <jon@solid-run.com>,
"Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH u-boot-marvell v3 11/39] tools: kwboot: Split sending image into header and data stages
Date: Fri, 24 Sep 2021 23:06:48 +0200 [thread overview]
Message-ID: <20210924210716.29752-12-kabel@kernel.org> (raw)
In-Reply-To: <20210924210716.29752-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
This change is required to implement other features in kwboot.
Split sending header and data parts of the image into two stages.
Signed-off-by: Pali Rohár <pali@kernel.org>
[ refactored ]
Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
tools/kwbimage.h | 8 +++--
tools/kwboot.c | 84 +++++++++++++++++++++++++++++++-----------------
2 files changed, 61 insertions(+), 31 deletions(-)
diff --git a/tools/kwbimage.h b/tools/kwbimage.h
index e063e3e41e..074bdfbe46 100644
--- a/tools/kwbimage.h
+++ b/tools/kwbimage.h
@@ -195,6 +195,10 @@ struct register_set_hdr_v1 {
#define OPT_HDR_V1_BINARY_TYPE 0x2
#define OPT_HDR_V1_REGISTER_TYPE 0x3
+#define KWBHEADER_V0_SIZE(hdr) \
+ (((hdr)->ext & 0x1) ? sizeof(struct kwb_header) : \
+ sizeof(struct main_hdr_v0))
+
#define KWBHEADER_V1_SIZE(hdr) \
(((hdr)->headersz_msb << 16) | le16_to_cpu((hdr)->headersz_lsb))
@@ -225,9 +229,9 @@ void init_kwb_image_type (void);
* header, byte 8 was reserved, and always set to 0. In the v1 header,
* byte 8 has been changed to a proper field, set to 1.
*/
-static inline unsigned int image_version(void *header)
+static inline unsigned int image_version(const void *header)
{
- unsigned char *ptr = header;
+ const unsigned char *ptr = header;
return ptr[8];
}
diff --git a/tools/kwboot.c b/tools/kwboot.c
index 0e533e3698..7f231c0823 100644
--- a/tools/kwboot.c
+++ b/tools/kwboot.c
@@ -57,11 +57,13 @@ static unsigned char kwboot_msg_debug[] = {
#define NAK 21 /* target block negative ack */
#define CAN 24 /* target/sender transfer cancellation */
+#define KWBOOT_XM_BLKSZ 128 /* xmodem block size */
+
struct kwboot_block {
uint8_t soh;
uint8_t pnum;
uint8_t _pnum;
- uint8_t data[128];
+ uint8_t data[KWBOOT_XM_BLKSZ];
uint8_t csum;
} __packed;
@@ -356,16 +358,15 @@ static size_t
kwboot_xm_makeblock(struct kwboot_block *block, const void *data,
size_t size, int pnum)
{
- const size_t blksz = sizeof(block->data);
size_t i, n;
block->soh = SOH;
block->pnum = pnum;
block->_pnum = ~block->pnum;
- n = size < blksz ? size : blksz;
+ n = size < KWBOOT_XM_BLKSZ ? size : KWBOOT_XM_BLKSZ;
memcpy(&block->data[0], data, n);
- memset(&block->data[n], 0, blksz - n);
+ memset(&block->data[n], 0, KWBOOT_XM_BLKSZ - n);
block->csum = 0;
for (i = 0; i < n; i++)
@@ -425,48 +426,73 @@ kwboot_xm_sendblock(int fd, struct kwboot_block *block)
}
static int
-kwboot_xmodem(int tty, const void *_data, size_t size)
+kwboot_xmodem_one(int tty, int *pnum, int header, const uint8_t *data,
+ size_t size)
{
- const uint8_t *data = _data;
- int rc, pnum, N, err;
-
- pnum = 1;
- N = 0;
+ size_t sent, left;
+ int rc;
- kwboot_printv("Sending boot image...\n");
+ kwboot_printv("Sending boot image %s (%zu bytes)...\n",
+ header ? "header" : "data", size);
- sleep(2); /* flush isn't effective without it */
- tcflush(tty, TCIOFLUSH);
+ left = size;
+ sent = 0;
- do {
+ while (sent < size) {
struct kwboot_block block;
- int n;
+ size_t blksz;
- n = kwboot_xm_makeblock(&block,
- data + N, size - N,
- pnum++);
- if (!n)
- break;
+ blksz = kwboot_xm_makeblock(&block, data, left, (*pnum)++);
+ data += blksz;
rc = kwboot_xm_sendblock(tty, &block);
if (rc)
goto out;
- N += n;
- kwboot_progress(N * 100 / size, '.');
- } while (1);
+ sent += blksz;
+ left -= blksz;
+
+ kwboot_progress(sent * 100 / size, '.');
+ }
- rc = kwboot_tty_send_char(tty, EOT);
+ kwboot_printv("Done\n");
+ return 0;
out:
kwboot_printv("\n");
return rc;
+}
-can:
- err = errno;
- kwboot_tty_send_char(tty, CAN);
- errno = err;
- goto out;
+static int
+kwboot_xmodem(int tty, const void *_img, size_t size)
+{
+ const uint8_t *img = _img;
+ int rc, pnum;
+ size_t hdrsz;
+
+ if (image_version(img) == 0)
+ hdrsz = KWBHEADER_V0_SIZE((struct main_hdr_v0 *)img);
+ else
+ hdrsz = KWBHEADER_V1_SIZE((struct main_hdr_v1 *)img);
+
+ kwboot_printv("Waiting 2s and flushing tty\n");
+ sleep(2); /* flush isn't effective without it */
+ tcflush(tty, TCIOFLUSH);
+
+ pnum = 1;
+
+ rc = kwboot_xmodem_one(tty, &pnum, 1, img, hdrsz);
+ if (rc)
+ return rc;
+
+ img += hdrsz;
+ size -= hdrsz;
+
+ rc = kwboot_xmodem_one(tty, &pnum, 0, img, size);
+ if (rc)
+ return rc;
+
+ return kwboot_tty_send_char(tty, EOT);
}
static int
--
2.32.0
next prev parent reply other threads:[~2021-09-24 21:10 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-24 21:06 [PATCH u-boot-marvell v3 00/39] kwboot higher baudrate Marek Behún
2021-08-17 22:59 ` [PATCH u-boot-marvell v3 19/39] tools: kwbimage: Simplify iteration over version 1 optional headers Marek Behún
2021-08-25 12:49 ` [PATCH u-boot-marvell v3 39/39] MAINTAINERS: Add entry for kwbimage / kwboot tools Marek Behún
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 01/39] tools: kwbimage: Fix printf format warning Marek Behún
2021-10-01 6:00 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 02/39] tools: kwboot: Fix buffer overflow in kwboot_terminal() Marek Behún
2021-10-01 6:14 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 03/39] tools: kwboot: Make the quit sequence buffer const Marek Behún
2021-10-01 6:14 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 04/39] tools: kwboot: Refactor and fix writing buffer Marek Behún
2021-10-01 6:14 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 05/39] tools: kwboot: Print version information header Marek Behún
2021-10-01 6:15 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 06/39] tools: kwboot: Fix kwboot_xm_sendblock() function when kwboot_tty_recv() fails Marek Behún
2021-10-01 6:15 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 07/39] tools: kwboot: Fix return type of kwboot_xm_makeblock() function Marek Behún
2021-10-01 6:15 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 08/39] tools: kwboot: Fix comparison of integers with different size Marek Behún
2021-10-01 6:16 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 09/39] tools: kwboot: Fix printing progress Marek Behún
2021-10-01 6:16 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 10/39] tools: kwboot: Print newline on error when progress was not completed Marek Behún
2021-10-01 6:16 ` Stefan Roese
2021-09-24 21:06 ` Marek Behún [this message]
2021-10-01 6:17 ` [PATCH u-boot-marvell v3 11/39] tools: kwboot: Split sending image into header and data stages Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 12/39] tools: kwboot: Use a function to check whether received byte is a Xmodem reply Marek Behún
2021-10-01 6:17 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 13/39] tools: kwboot: Allow non-xmodem text output from BootROM only in a specific case Marek Behún
2021-10-01 6:19 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 14/39] tools: kwboot: Print new line after SPL output Marek Behún
2021-10-01 6:20 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 15/39] tools: kwboot: Allow greater timeout when executing header code Marek Behún
2021-10-01 6:20 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 16/39] tools: kwboot: Prevent waiting indefinitely if no xmodem reply is received Marek Behún
2021-10-01 6:21 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 17/39] tools: kwboot: Properly finish xmodem transfer Marek Behún
2021-10-01 6:21 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 18/39] tools: kwboot: Always call kwboot_img_patch_hdr() Marek Behún
2021-10-01 6:22 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 20/39] tools: kwboot: Don't patch image header if signed Marek Behún
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 21/39] tools: kwboot: Patch source address in image header Marek Behún
2021-10-01 6:22 ` Stefan Roese
2021-09-24 21:06 ` [PATCH u-boot-marvell v3 22/39] tools: kwboot: Patch destination address to DDR area for SPI image Marek Behún
2021-10-01 6:23 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 23/39] tools: kwbimage: Refactor image_version() Marek Behún
2021-10-01 6:23 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 24/39] tools: kwbimage: Refactor kwbimage header size determination Marek Behún
2021-10-01 6:23 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 25/39] tools: kwbimage: Update comments describing kwbimage v1 structures Marek Behún
2021-10-01 6:24 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 26/39] tools: kwboot: Round up header size to 128 B when patching Marek Behún
2021-10-01 6:24 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 27/39] tools: kwboot: Explicitly check against size of struct main_hdr_v1 Marek Behún
2021-10-01 6:24 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 28/39] tools: kwboot: Support higher baudrates when booting via UART Marek Behún
2021-10-01 6:27 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 29/39] tools: kwboot: Allow any baudrate on Linux Marek Behún
2021-10-01 6:28 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 30/39] tools: kwboot: Check whether baudrate was set to requested value Marek Behún
2021-10-01 6:29 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 31/39] tools: kwboot: Fix initializing tty device Marek Behún
2021-10-01 6:29 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 32/39] tools: kwboot: Disable tty interbyte timeout Marek Behún
2021-10-01 6:29 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 33/39] tools: kwboot: Disable non-blocking mode Marek Behún
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 34/39] tools: kwboot: Cosmetic fix Marek Behún
2021-10-01 6:30 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 35/39] tools: kwboot: Avoid code repetition in kwboot_img_patch() Marek Behún
2021-10-01 6:30 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 36/39] tools: kwboot: Update file header Marek Behún
2021-10-01 6:30 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 37/39] tools: kwboot: Add Pali and Marek as authors Marek Behún
2021-10-01 6:30 ` Stefan Roese
2021-09-24 21:07 ` [PATCH u-boot-marvell v3 38/39] doc/kwboot.1: Update man page Marek Behún
2021-10-01 6:31 ` Stefan Roese
2021-09-30 18:14 ` [PATCH u-boot-marvell v3 00/39] kwboot higher baudrate Pali Rohár
2021-10-01 4:52 ` Stefan Roese
2021-10-01 7:46 ` Stefan Roese
2021-10-01 9:16 ` Marek Behún
2021-10-01 9:23 ` Stefan Roese
2021-10-01 9:34 ` Marek Behún
2021-10-01 9:28 ` Pali Rohár
2021-10-01 9:58 ` Stefan Roese
2021-10-01 10:09 ` Pali Rohár
2021-10-01 10:28 ` Stefan Roese
2021-10-01 10:39 ` Pali Rohár
2021-10-01 10:43 ` Stefan Roese
2021-10-01 10:49 ` Pali Rohár
2021-10-01 11:01 ` Stefan Roese
2021-10-01 12:59 ` Tom Rini
2021-10-03 9:52 ` Stefan Roese
2021-10-01 10:36 ` Marek Behún
2021-10-01 10:40 ` Stefan Roese
2021-10-01 10:45 ` Marek Behún
2021-10-22 8:38 ` Stefan Roese
2021-10-22 8:48 ` Pali Rohár
2021-10-22 8:50 ` Stefan Roese
[not found] ` <20210924210716.29752-40-kabel@kernel.org>
2021-10-01 6:31 ` [PATCH u-boot-marvell v3 39/39] MAINTAINERS: Add entry for kwbimage / kwboot tools Stefan Roese
2021-10-01 12:33 ` [PATCH u-boot-marvell v3 00/39] kwboot higher baudrate Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210924210716.29752-12-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=baruch@tkos.co.il \
--cc=dgilmore@redhat.com \
--cc=jon@solid-run.com \
--cc=judge.packham@gmail.com \
--cc=marek.behun@nic.cz \
--cc=mario.six@gdsys.cc \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox