From: Tim Harvey <tharvey@gateworks.com>
To: u-boot@lists.denx.de, Stefano Babic <sbabic@denx.de>,
Fabio Estevam <festevam@gmail.com>,
"NXP i . MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH 2/7] imx: ventana: add U-Boot watchdog support
Date: Wed, 29 Sep 2021 15:04:17 -0700 [thread overview]
Message-ID: <20210929220422.13661-2-tharvey@gateworks.com> (raw)
In-Reply-To: <20210929220422.13661-1-tharvey@gateworks.com>
Add watchdog support for U-Boot
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
configs/gwventana_emmc_defconfig | 6 +++++-
configs/gwventana_gw5904_defconfig | 6 +++++-
configs/gwventana_nand_defconfig | 6 +++++-
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig
index 58abd1d40e..eae41cdfa7 100644
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@@ -41,7 +41,6 @@ CONFIG_SPL_DMA=y
CONFIG_SPL_I2C=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_POWER=y
-CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Ventana > "
CONFIG_CMD_BOOTZ=y
@@ -55,6 +54,7 @@ CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_WDT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
@@ -105,6 +105,8 @@ CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_USB=y
@@ -129,4 +131,6 @@ CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
+CONFIG_IMX_WATCHDOG=y
CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
index 7d385c2f58..fdfc82dc7f 100644
--- a/configs/gwventana_gw5904_defconfig
+++ b/configs/gwventana_gw5904_defconfig
@@ -41,7 +41,6 @@ CONFIG_SPL_DMA=y
CONFIG_SPL_I2C=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_POWER=y
-CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Ventana > "
CONFIG_CMD_BOOTZ=y
@@ -55,6 +54,7 @@ CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_WDT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
@@ -109,6 +109,8 @@ CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_USB=y
@@ -133,4 +135,6 @@ CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
+CONFIG_IMX_WATCHDOG=y
CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig
index fbaf6dfc16..0265dafbd0 100644
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@@ -42,7 +42,6 @@ CONFIG_SPL_I2C=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_POWER=y
-CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Ventana > "
CONFIG_CMD_BOOTZ=y
@@ -58,6 +57,7 @@ CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_WDT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
@@ -111,6 +111,8 @@ CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_USB=y
@@ -135,4 +137,6 @@ CONFIG_DM_VIDEO=y
CONFIG_SYS_WHITE_ON_BLACK=y
# CONFIG_PANEL is not set
CONFIG_VIDEO_IPUV3=y
+CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
+CONFIG_IMX_WATCHDOG=y
CONFIG_FDT_FIXUP_PARTITIONS=y
--
2.17.1
next prev parent reply other threads:[~2021-09-29 22:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-29 22:04 [PATCH 1/7] imx: ventana: add part command Tim Harvey
2021-09-29 22:04 ` Tim Harvey [this message]
2021-10-07 14:13 ` [PATCH 2/7] imx: ventana: add U-Boot watchdog support sbabic
2021-09-29 22:04 ` [PATCH 3/7] imx: ventana: remove phy gpio reset from dt Tim Harvey
2021-10-07 14:13 ` sbabic
2021-09-29 22:04 ` [PATCH 4/7] imx: ventana: enable additional USB ether devices Tim Harvey
2021-10-07 14:12 ` sbabic
2021-09-29 22:04 ` [PATCH 5/7] imx: ventana: fix splash logo drawing Tim Harvey
2021-10-07 14:12 ` sbabic
2021-09-29 22:04 ` [PATCH 6/7] imx: ventana: update LVDS support Tim Harvey
2021-10-07 14:14 ` sbabic
2021-09-29 22:04 ` [PATCH 7/7] imx: ventana: fix USB hub reset Tim Harvey
2021-10-07 14:14 ` sbabic
2021-10-07 14:14 ` [PATCH 1/7] imx: ventana: add part command sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210929220422.13661-2-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=festevam@gmail.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox