From: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
To: <lukma@denx.de>, <sjg@chromium.org>, <trini@konsulko.com>,
<mr.nuke.me@gmail.com>, <u-boot@lists.denx.de>
Cc: <joel@jms.id.au>, <ryan_chen@aspeedtech.com>,
<johnny_huang@aspeedtech.com>
Subject: [PATCH next v6 10/12] configs: ast2600-evb: Enable SPL FIT support
Date: Fri, 15 Oct 2021 10:03:35 +0800 [thread overview]
Message-ID: <20211015020337.1024-11-chiawei_wang@aspeedtech.com> (raw)
In-Reply-To: <20211015020337.1024-1-chiawei_wang@aspeedtech.com>
Enable SPL FIT image load and verification support.
The HW accelerated SHA is also available with the
newly added support of the HACE HW hash engine.
The SPL thumb build is also enabled to keep the binary
less than 64KB to fit into the Aspeed secure boot design.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
---
configs/evb-ast2600_defconfig | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig
index 56ab885d9b..eba6940ec1 100644
--- a/configs/evb-ast2600_defconfig
+++ b/configs/evb-ast2600_defconfig
@@ -1,7 +1,8 @@
CONFIG_ARM=y
CONFIG_SYS_DCACHE_OFF=y
+CONFIG_SPL_SYS_THUMB_BUILD=y
CONFIG_ARCH_ASPEED=y
-CONFIG_SYS_TEXT_BASE=0x10000
+CONFIG_SYS_TEXT_BASE=0x80000000
CONFIG_ASPEED_AST2600=y
CONFIG_TARGET_EVB_AST2600=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -12,13 +13,17 @@ CONFIG_ENV_SIZE=0x10000
CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb"
CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x83000000
CONFIG_SPL_SIZE_LIMIT=0x10000
CONFIG_SPL=y
# CONFIG_ARMV7_NONSEC is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SYS_LOAD_ADDR=0x83000000
CONFIG_FIT=y
-# CONFIG_LEGACY_IMAGE_FORMAT is not set
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
CONFIG_USE_BOOTCOMMAND=y
@@ -26,8 +31,10 @@ CONFIG_BOOTCOMMAND="bootm 20100000"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
-# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000
+CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
@@ -47,6 +54,9 @@ CONFIG_REGMAP=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
+CONFIG_DM_HASH=y
+CONFIG_HASH_ASPEED=y
+CONFIG_ASPEED_ACRY=y
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_SPL_MISC=y
@@ -65,5 +75,9 @@ CONFIG_SYS_NS16550=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_WDT=y
+CONFIG_SHA512_ALGO=y
+CONFIG_SHA512=y
+CONFIG_SHA384=y
CONFIG_HEXDUMP=y
# CONFIG_EFI_LOADER is not set
+CONFIG_PHANDLE_CHECK_SEQ=y
--
2.17.1
next prev parent reply other threads:[~2021-10-15 2:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-15 2:03 [PATCH next v6 00/12] aspeed: Support secure boot chain with FIT image verification Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 01/12] image: fit: Fix parameter name for hash algorithm Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 02/12] aspeed: ast2600: Enlarge SRAM size Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 03/12] clk: ast2600: Add YCLK control for HACE Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 04/12] crypto: aspeed: Add AST2600 HACE support Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 05/12] ARM: dts: ast2600: Add HACE to device tree Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 06/12] clk: ast2600: Add RSACLK control for ACRY Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 07/12] crypto: aspeed: Add AST2600 ACRY support Chia-Wei Wang
2021-10-18 3:06 ` ChiaWei Wang
2021-10-15 2:03 ` [PATCH next v6 08/12] ARM: dts: ast2600: Add ACRY to device tree Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 09/12] ast2600: spl: Locate load buffer in DRAM space Chia-Wei Wang
2021-10-15 2:03 ` Chia-Wei Wang [this message]
2021-10-15 2:03 ` [PATCH next v6 11/12] configs: aspeed: Make EXTRA_ENV_SETTINGS board specific Chia-Wei Wang
2021-10-15 2:03 ` [PATCH next v6 12/12] configs: ast2600: Boot kernel FIT in DRAM Chia-Wei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211015020337.1024-11-chiawei_wang@aspeedtech.com \
--to=chiawei_wang@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=johnny_huang@aspeedtech.com \
--cc=lukma@denx.de \
--cc=mr.nuke.me@gmail.com \
--cc=ryan_chen@aspeedtech.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox