* [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10
@ 2021-08-10 19:12 Marek Vasut
2021-08-10 19:12 ` [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown Marek Vasut
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Marek Vasut @ 2021-08-10 19:12 UTC (permalink / raw)
To: u-boot
Cc: Marek Vasut, Marcel Ziswiler, Peng Fan, Stefano Babic, Ye Li,
uboot-imx
The PERSIST_SECONDARY_BOOT is in GPR10 address 0x30390098, adjust the
text which currently says it is in GPR0 while using the correct address
of GPR10.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
---
doc/imx/misc/psb.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/imx/misc/psb.rst b/doc/imx/misc/psb.rst
index 71ac09fac8d..3533c916405 100644
--- a/doc/imx/misc/psb.rst
+++ b/doc/imx/misc/psb.rst
@@ -159,7 +159,7 @@ WARM reset into B-copy using WDT
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To perform a reboot into B-copy, the PERSIST_SECONDARY_BOOT must be set
-in SRC_GPR0 register. Example on iMX8MM::
+in SRC_GPR10 register. Example on iMX8MM::
=> mw 0x30390098 0x40000000
--
2.30.2
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown
2021-08-10 19:12 [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10 Marek Vasut
@ 2021-08-10 19:12 ` Marek Vasut
2021-08-11 10:11 ` Marcel Ziswiler
2021-10-20 17:20 ` sbabic
2021-08-11 10:10 ` [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10 Marcel Ziswiler
2021-10-20 17:20 ` sbabic
2 siblings, 2 replies; 6+ messages in thread
From: Marek Vasut @ 2021-08-10 19:12 UTC (permalink / raw)
To: u-boot
Cc: Marek Vasut, Marcel Ziswiler, Peng Fan, Stefano Babic, Ye Li,
uboot-imx
On iMX8MM with Fast Boot fuse blown, the SIT and A-copy image are
placed at different offset than on iMX8MM with Fast Boot fuse NOT
blown. List both options and both offsets to avoid confusion.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
---
doc/imx/misc/psb.rst | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/doc/imx/misc/psb.rst b/doc/imx/misc/psb.rst
index 3533c916405..2eccdcfccd9 100644
--- a/doc/imx/misc/psb.rst
+++ b/doc/imx/misc/psb.rst
@@ -75,13 +75,15 @@ offset 0x1 means 512 Bytes from the start of SD/eMMC card data partition).
For details on the addition of two numbers in recommended B-copy offset, see
SIT format below.
-+----------+--------------------+-----------------------+-----------------------------+
-| SoC | SIT offset (fixed) | A-copy offset (fixed) | B-copy offset (recommended) |
-+----------+--------------------+-----------------------+-----------------------------+
-| iMX7D | 0x1 | 0x2 | 0x800+0x2 |
-+----------+--------------------+-----------------------+-----------------------------+
-| iMX8MM | 0x41 | 0x42 | 0x1000+0x42 |
-+----------+--------------------+-----------------------+-----------------------------+
++----------+-----------------------------+--------------------+-----------------------+-----------------------------+
+| SoC | Boot Device Type | SIT offset (fixed) | A-copy offset (fixed) | B-copy offset (recommended) |
++----------+-----------------------------+--------------------+-----------------------+-----------------------------+
+| iMX7D | | 0x1 | 0x2 | 0x800+0x2 |
++----------+-----------------------------+--------------------+-----------------------+-----------------------------+
+| iMX8MM | SD/eSD/MMC/eMMC normal boot | 0x41 | 0x42 | 0x1000+0x42 |
++----------+-----------------------------+--------------------+-----------------------+-----------------------------+
+| iMX8MM | eMMC Fast boot fuse blown | 0x1 | 0x2 | 0x1000+0x2 |
++----------+-----------------------------+--------------------+-----------------------+-----------------------------+
SIT format
~~~~~~~~~~
--
2.30.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown
2021-08-10 19:12 ` [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown Marek Vasut
@ 2021-08-11 10:11 ` Marcel Ziswiler
2021-10-20 17:20 ` sbabic
1 sibling, 0 replies; 6+ messages in thread
From: Marcel Ziswiler @ 2021-08-11 10:11 UTC (permalink / raw)
To: marex@denx.de, u-boot@lists.denx.de
Cc: peng.fan@nxp.com, uboot-imx@nxp.com, sbabic@denx.de,
ye.li@nxp.com
On Tue, 2021-08-10 at 21:12 +0200, Marek Vasut wrote:
> On iMX8MM with Fast Boot fuse blown, the SIT and A-copy image are
> placed at different offset than on iMX8MM with Fast Boot fuse NOT
> blown. List both options and both offsets to avoid confusion.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Ye Li <ye.li@nxp.com>
> Cc: uboot-imx <uboot-imx@nxp.com>
> ---
> doc/imx/misc/psb.rst | 16 +++++++++-------
> 1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/doc/imx/misc/psb.rst b/doc/imx/misc/psb.rst
> index 3533c916405..2eccdcfccd9 100644
> --- a/doc/imx/misc/psb.rst
> +++ b/doc/imx/misc/psb.rst
> @@ -75,13 +75,15 @@ offset 0x1 means 512 Bytes from the start of SD/eMMC card data partition).
> For details on the addition of two numbers in recommended B-copy offset, see
> SIT format below.
>
> -+----------+--------------------+-----------------------+-----------------------------+
> -| SoC | SIT offset (fixed) | A-copy offset (fixed) | B-copy offset (recommended) |
> -+----------+--------------------+-----------------------+-----------------------------+
> -| iMX7D | 0x1 | 0x2 | 0x800+0x2 |
> -+----------+--------------------+-----------------------+-----------------------------+
> -| iMX8MM | 0x41 | 0x42 | 0x1000+0x42 |
> -+----------+--------------------+-----------------------+-----------------------------+
> ++----------+-----------------------------+--------------------+-----------------------+---------------------
> --------+
> +| SoC | Boot Device Type | SIT offset (fixed) | A-copy offset (fixed) | B-copy offset
> (recommended) |
> ++----------+-----------------------------+--------------------+-----------------------+---------------------
> --------+
> +| iMX7D | | 0x1 | 0x2 |
> 0x800+0x2 |
> ++----------+-----------------------------+--------------------+-----------------------+---------------------
> --------+
> +| iMX8MM | SD/eSD/MMC/eMMC normal boot | 0x41 | 0x42 |
> 0x1000+0x42 |
> ++----------+-----------------------------+--------------------+-----------------------+---------------------
> --------+
> +| iMX8MM | eMMC Fast boot fuse blown | 0x1 | 0x2 |
> 0x1000+0x2 |
> ++----------+-----------------------------+--------------------+-----------------------+---------------------
> --------+
>
> SIT format
> ~~~~~~~~~~
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown
2021-08-10 19:12 ` [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown Marek Vasut
2021-08-11 10:11 ` Marcel Ziswiler
@ 2021-10-20 17:20 ` sbabic
1 sibling, 0 replies; 6+ messages in thread
From: sbabic @ 2021-10-20 17:20 UTC (permalink / raw)
To: Marek Vasut, u-boot
> On iMX8MM with Fast Boot fuse blown, the SIT and A-copy image are
> placed at different offset than on iMX8MM with Fast Boot fuse NOT
> blown. List both options and both offsets to avoid confusion.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Ye Li <ye.li@nxp.com>
> Cc: uboot-imx <uboot-imx@nxp.com>
> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10
2021-08-10 19:12 [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10 Marek Vasut
2021-08-10 19:12 ` [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown Marek Vasut
@ 2021-08-11 10:10 ` Marcel Ziswiler
2021-10-20 17:20 ` sbabic
2 siblings, 0 replies; 6+ messages in thread
From: Marcel Ziswiler @ 2021-08-11 10:10 UTC (permalink / raw)
To: marex@denx.de, u-boot@lists.denx.de
Cc: peng.fan@nxp.com, uboot-imx@nxp.com, sbabic@denx.de,
ye.li@nxp.com
On Tue, 2021-08-10 at 21:12 +0200, Marek Vasut wrote:
> The PERSIST_SECONDARY_BOOT is in GPR10 address 0x30390098, adjust the
> text which currently says it is in GPR0 while using the correct address
> of GPR10.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Ye Li <ye.li@nxp.com>
> Cc: uboot-imx <uboot-imx@nxp.com>
> ---
> doc/imx/misc/psb.rst | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/doc/imx/misc/psb.rst b/doc/imx/misc/psb.rst
> index 71ac09fac8d..3533c916405 100644
> --- a/doc/imx/misc/psb.rst
> +++ b/doc/imx/misc/psb.rst
> @@ -159,7 +159,7 @@ WARM reset into B-copy using WDT
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> To perform a reboot into B-copy, the PERSIST_SECONDARY_BOOT must be set
> -in SRC_GPR0 register. Example on iMX8MM::
> +in SRC_GPR10 register. Example on iMX8MM::
>
> => mw 0x30390098 0x40000000
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10
2021-08-10 19:12 [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10 Marek Vasut
2021-08-10 19:12 ` [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown Marek Vasut
2021-08-11 10:10 ` [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10 Marcel Ziswiler
@ 2021-10-20 17:20 ` sbabic
2 siblings, 0 replies; 6+ messages in thread
From: sbabic @ 2021-10-20 17:20 UTC (permalink / raw)
To: Marek Vasut, u-boot
> The PERSIST_SECONDARY_BOOT is in GPR10 address 0x30390098, adjust the
> text which currently says it is in GPR0 while using the correct address
> of GPR10.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Ye Li <ye.li@nxp.com>
> Cc: uboot-imx <uboot-imx@nxp.com>
> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-10-20 17:20 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-08-10 19:12 [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10 Marek Vasut
2021-08-10 19:12 ` [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown Marek Vasut
2021-08-11 10:11 ` Marcel Ziswiler
2021-10-20 17:20 ` sbabic
2021-08-11 10:10 ` [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10 Marcel Ziswiler
2021-10-20 17:20 ` sbabic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox