[PATCH u-boot-marvell 11/11] tools: kwbimage: Properly set srcaddr in kwbimage v0

["Marek Behún" <kabel@kernel.org>]

From: Pali Rohár <pali@kernel.org>

Field srcaddr in kwbimage v0 needs to be adjusted similarly like in v1.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
 tools/kwbimage.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 952023c14c..875f636c7a 100644
--- a/tools/kwbimage.c
+++ b/tools/kwbimage.c
@@ -937,6 +937,28 @@ static void *image_create_v0(size_t *imagesz, struct image_tool_params *params,
 	main_hdr->checksum = image_checksum8(image,
 					     sizeof(struct main_hdr_v0));
 
+	/*
+	 * For SATA srcaddr is specified in number of sectors starting from
+	 * sector 0. The main header is stored at sector number 1.
+	 * This expects the sector size to be 512 bytes.
+	 * Header size is already aligned.
+	 */
+	if (main_hdr->blockid == IBR_HDR_SATA_ID)
+		main_hdr->srcaddr = cpu_to_le32(headersz / 512 + 1);
+
+	/*
+	 * For SDIO srcaddr is specified in number of sectors starting from
+	 * sector 0. The main header is stored at sector number 0.
+	 * This expects sector size to be 512 bytes.
+	 * Header size is already aligned.
+	 */
+	if (main_hdr->blockid == IBR_HDR_SDIO_ID)
+		main_hdr->srcaddr = cpu_to_le32(headersz / 512);
+
+	/* For PCIe srcaddr is not used and must be set to 0xFFFFFFFF. */
+	if (main_hdr->blockid == IBR_HDR_PEX_ID)
+		main_hdr->srcaddr = cpu_to_le32(0xFFFFFFFF);
+
 	/* Generate the ext header */
 	if (has_ext) {
 		struct ext_hdr_v0 *ext_hdr;
-- 
2.32.0