From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Pali Rohár" <pali@kernel.org>,
"Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH u-boot-marvell 04/11] tools: kwbimage: Fix validation of kwbimage v0
Date: Mon, 8 Nov 2021 18:12:44 +0100 [thread overview]
Message-ID: <20211108171251.25382-5-kabel@kernel.org> (raw)
In-Reply-To: <20211108171251.25382-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
kwbimage v0 sldo has 32-bit data checksum at the end like kwbimage v1.
Use same data checksum validation for both v0 and v1 image types.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
tools/kwbimage.c | 80 ++++++++++++++++++++++++++----------------------
1 file changed, 43 insertions(+), 37 deletions(-)
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 38b6e2fed2..a176b39b08 100644
--- a/tools/kwbimage.c
+++ b/tools/kwbimage.c
@@ -1680,6 +1680,9 @@ static int kwbimage_verify_header(unsigned char *ptr, int image_size,
struct image_tool_params *params)
{
size_t header_size = kwbheader_size(ptr);
+ uint8_t blockid;
+ uint32_t offset;
+ uint32_t size;
uint8_t csum;
if (header_size > image_size)
@@ -1699,61 +1702,64 @@ static int kwbimage_verify_header(unsigned char *ptr, int image_size,
if (csum != ext_hdr->checksum)
return -FDT_ERR_BADSTRUCTURE;
}
+
+ blockid = mhdr->blockid;
+ offset = le32_to_cpu(mhdr->srcaddr);
+ size = le32_to_cpu(mhdr->blocksize);
} else if (kwbimage_version(ptr) == 1) {
struct main_hdr_v1 *mhdr = (struct main_hdr_v1 *)ptr;
const uint8_t *mhdr_end;
struct opt_hdr_v1 *ohdr;
- uint32_t offset;
- uint32_t size;
mhdr_end = (uint8_t *)mhdr + header_size;
for_each_opt_hdr_v1 (ohdr, ptr)
if (!opt_hdr_v1_valid_size(ohdr, mhdr_end))
return -FDT_ERR_BADSTRUCTURE;
+ blockid = mhdr->blockid;
offset = le32_to_cpu(mhdr->srcaddr);
+ size = le32_to_cpu(mhdr->blocksize);
+ } else {
+ return -FDT_ERR_BADSTRUCTURE;
+ }
- /*
- * For SATA srcaddr is specified in number of sectors.
- * The main header is must be stored at sector number 1.
- * This expects that sector size is 512 bytes and recalculates
- * data offset to bytes relative to the main header.
- */
- if (mhdr->blockid == IBR_HDR_SATA_ID) {
- if (offset < 1)
- return -FDT_ERR_BADSTRUCTURE;
- offset -= 1;
- offset *= 512;
- }
+ /*
+ * For SATA srcaddr is specified in number of sectors.
+ * The main header is must be stored at sector number 1.
+ * This expects that sector size is 512 bytes and recalculates
+ * data offset to bytes relative to the main header.
+ */
+ if (blockid == IBR_HDR_SATA_ID) {
+ if (offset < 1)
+ return -FDT_ERR_BADSTRUCTURE;
+ offset -= 1;
+ offset *= 512;
+ }
- /*
- * For SDIO srcaddr is specified in number of sectors.
- * This expects that sector size is 512 bytes and recalculates
- * data offset to bytes.
- */
- if (mhdr->blockid == IBR_HDR_SDIO_ID)
- offset *= 512;
+ /*
+ * For SDIO srcaddr is specified in number of sectors.
+ * This expects that sector size is 512 bytes and recalculates
+ * data offset to bytes.
+ */
+ if (blockid == IBR_HDR_SDIO_ID)
+ offset *= 512;
- /*
- * For PCIe srcaddr is always set to 0xFFFFFFFF.
- * This expects that data starts after all headers.
- */
- if (mhdr->blockid == IBR_HDR_PEX_ID && offset == 0xFFFFFFFF)
- offset = header_size;
+ /*
+ * For PCIe srcaddr is always set to 0xFFFFFFFF.
+ * This expects that data starts after all headers.
+ */
+ if (blockid == IBR_HDR_PEX_ID && offset == 0xFFFFFFFF)
+ offset = header_size;
- if (offset > image_size || offset % 4 != 0)
- return -FDT_ERR_BADSTRUCTURE;
+ if (offset > image_size || offset % 4 != 0)
+ return -FDT_ERR_BADSTRUCTURE;
- size = le32_to_cpu(mhdr->blocksize);
- if (size < 4 || offset + size > image_size || size % 4 != 0)
- return -FDT_ERR_BADSTRUCTURE;
+ if (size < 4 || offset + size > image_size || size % 4 != 0)
+ return -FDT_ERR_BADSTRUCTURE;
- if (image_checksum32(ptr + offset, size - 4) !=
- *(uint32_t *)(ptr + offset + size - 4))
- return -FDT_ERR_BADSTRUCTURE;
- } else {
+ if (image_checksum32(ptr + offset, size - 4) !=
+ *(uint32_t *)(ptr + offset + size - 4))
return -FDT_ERR_BADSTRUCTURE;
- }
return 0;
}
--
2.32.0
next prev parent reply other threads:[~2021-11-08 17:21 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-08 17:12 [PATCH u-boot-marvell 00/11] Another kwbimage series Marek Behún
2021-11-08 17:12 ` [PATCH u-boot-marvell 01/11] tools: kwbimage: Add support for new commands UART_PORT and UART_MPP Marek Behún
2021-11-10 8:23 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 02/11] tools: kwbimage: Explicitly set version also for kwbimage v0 Marek Behún
2021-11-10 8:23 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 03/11] tools: kwbimage: Set BOOT_FROM by default to SPI Marek Behún
2021-11-10 8:23 ` Stefan Roese
2021-11-08 17:12 ` Marek Behún [this message]
2021-11-10 8:24 ` [PATCH u-boot-marvell 04/11] tools: kwbimage: Fix validation of kwbimage v0 Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 05/11] tools: kwbimage: Remove unused enums and prototypes Marek Behún
2021-11-10 8:25 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 06/11] tools: kwbimage: Align final UART image to 128 bytes Marek Behún
2021-11-10 8:28 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 07/11] tools: kwbimage: Do not put final image padding to the image data size Marek Behún
2021-11-10 8:28 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 08/11] tools: kwbimage: Align kwbimage header to proper size Marek Behún
2021-11-10 8:28 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 09/11] tools: kwbimage: Fill the real header size into the main header Marek Behún
2021-11-10 8:29 ` Stefan Roese
2021-12-25 17:48 ` Pierre Bourdon
2021-12-25 17:57 ` Pali Rohár
2021-12-25 18:06 ` Pierre Bourdon
2021-12-25 18:10 ` Pali Rohár
2021-12-25 18:18 ` Pierre Bourdon
2021-12-25 19:11 ` Pali Rohár
2021-12-25 19:48 ` Pierre Bourdon
2021-12-25 20:01 ` Pali Rohár
2021-12-25 20:15 ` Pierre Bourdon
2021-12-25 20:42 ` Pali Rohár
2021-11-08 17:12 ` [PATCH u-boot-marvell 10/11] tools: kwbimage: Properly calculate and align kwbimage v0 header size Marek Behún
2021-11-10 8:30 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 11/11] tools: kwbimage: Properly set srcaddr in kwbimage v0 Marek Behún
2021-11-10 8:30 ` Stefan Roese
2021-11-10 5:41 ` [PATCH u-boot-marvell 00/11] Another kwbimage series Stefan Roese
2021-11-10 8:19 ` Pali Rohár
2021-11-10 13:52 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211108171251.25382-5-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox