public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Martin Schiller <ms@dev.tdt.de>
To: u-boot@lists.denx.de
Cc: Martin Schiller <ms@dev.tdt.de>, Priyanka Jain <priyanka.jain@nxp.com>
Subject: [PATCH] board: ls1046ardb: force PCI device enumeration
Date: Wed, 17 Nov 2021 12:59:20 +0100	[thread overview]
Message-ID: <20211117115920.27097-1-ms@dev.tdt.de> (raw)

Commit 045ecf899252 ("configs: enable DM_ETH support for LS1046ARDB")
resulted in the PCI bus no longer being implicitly enumerated.

However, this is necessary for the fdt pcie fixups to work.

Therefore, similar to commit 8b6558bd4187 ("board: ls1088ardb:
transition to DM_ETH"), pci_init() is now called in the board_init()
routine when CONFIG_DM_ETH is active.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
CC: Priyanka Jain <priyanka.jain@nxp.com>
---
 board/freescale/ls1046ardb/ls1046ardb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c
index 93ef903f29..d0abfe8869 100644
--- a/board/freescale/ls1046ardb/ls1046ardb.c
+++ b/board/freescale/ls1046ardb/ls1046ardb.c
@@ -93,6 +93,10 @@ int board_init(void)
 	ppa_init();
 #endif
 
+#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
+	pci_init();
+#endif
+
 	/* invert AQR105 IRQ pins polarity */
 	out_be32(&scfg->intpcr, AQR105_IRQ_MASK);
 
-- 
2.20.1


             reply	other threads:[~2021-11-17 13:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-17 11:59 Martin Schiller [this message]
2021-11-22 16:30 ` [PATCH] board: ls1046ardb: force PCI device enumeration Camelia Alexandra Groza (OSS)
2021-11-23  6:18   ` Martin Schiller
2021-12-06  8:23   ` Priyanka Jain (OSS)
  -- strict thread matches above, loose matches on Subject: below --
2021-11-17  7:02 Martin Schiller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211117115920.27097-1-ms@dev.tdt.de \
    --to=ms@dev.tdt.de \
    --cc=priyanka.jain@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox