From: Fabio Estevam <festevam@gmail.com>
To: sbabic@denx.de
Cc: pbrobinson@gmail.com, trini@konsulko.com, u-boot@lists.denx.de,
Fabio Estevam <festevam@gmail.com>
Subject: [PATCH 4/6] udoo: Adjust the SD card device numbering
Date: Sat, 18 Dec 2021 18:10:23 -0300 [thread overview]
Message-ID: <20211218211025.770362-4-festevam@gmail.com> (raw)
In-Reply-To: <20211218211025.770362-1-festevam@gmail.com>
After the conversion to DM the SD card shows up as 'mmc 2'
device.
Adjust the 'mmcdev' and the distro command 'func' accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
configs/udoo_defconfig | 1 +
include/configs/udoo.h | 4 ++--
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig
index 8e1bba112041..284ea0588465 100644
--- a/configs/udoo_defconfig
+++ b/configs/udoo_defconfig
@@ -35,6 +35,7 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=2
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_DM=y
CONFIG_BOUNCE_BUFFER=y
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index fe6ea68dd461..4bddc0eca30e 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -28,7 +28,7 @@
"fdt_addr=0x18000000\0" \
"fdt_addr_r=0x18000000\0" \
"ip_dyn=yes\0" \
- "mmcdev=0\0" \
+ "mmcdev=2\0" \
"mmcrootfstype=ext4\0" \
"findfdt="\
"if test ${board_rev} = MX6Q; then " \
@@ -44,7 +44,7 @@
BOOTENV
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
+ func(MMC, mmc, 2) \
func(SATA, sata, 0) \
func(DHCP, dhcp, na)
--
2.25.1
next prev parent reply other threads:[~2021-12-18 21:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-18 21:10 [PATCH 1/6] udoo_spl: Initialize the eSDHC controller in SPL Fabio Estevam
2021-12-18 21:10 ` [PATCH 2/6] ARM: dts: imx6qdl-udoo: Properly describe the SD card detect Fabio Estevam
2021-12-19 15:54 ` Peter Robinson
2021-12-19 22:43 ` Fabio Estevam
2022-01-09 1:27 ` Tom Rini
2021-12-18 21:10 ` [PATCH 3/6] udoo: Call gpio_request() Fabio Estevam
2021-12-20 16:10 ` Peter Robinson
2022-01-09 1:27 ` Tom Rini
2021-12-18 21:10 ` Fabio Estevam [this message]
2021-12-21 9:52 ` [PATCH 4/6] udoo: Adjust the SD card device numbering Peter Robinson
2022-01-09 1:27 ` Tom Rini
2021-12-18 21:10 ` [PATCH 5/6] udoo: Increase CONFIG_ENV_OFFSET Fabio Estevam
2021-12-21 9:52 ` Peter Robinson
2022-01-09 1:27 ` Tom Rini
2021-12-18 21:10 ` [PATCH 6/6] udoo: Select CMD_DM Fabio Estevam
2021-12-21 9:53 ` Peter Robinson
2022-01-09 1:27 ` Tom Rini
2021-12-20 16:09 ` [PATCH 1/6] udoo_spl: Initialize the eSDHC controller in SPL Peter Robinson
2021-12-23 15:03 ` Fabio Estevam
2022-01-07 20:17 ` Fabio Estevam
2022-01-09 1:27 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211218211025.770362-4-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=pbrobinson@gmail.com \
--cc=sbabic@denx.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox