From: Tony Dinh <mibodhi@gmail.com>
To: U-Boot Mailing List <u-boot@lists.denx.de>, Stefan Roese <sr@denx.de>
Cc: "Marek Beh�n" <marek.behun@nic.cz>,
"Pali Roh�r" <pali@kernel.org>,
"David Purdy" <david.c.purdy@gmail.com>,
"Tom Rini" <trini@konsulko.com>, "Tony Dinh" <mibodhi@gmail.com>,
"Andre Przywara" <andre.przywara@arm.com>,
"Christian Hewitt" <christianshewitt@gmail.com>,
"Fabio Estevam" <festevam@denx.de>,
"Jagan Teki" <jagan@amarulasolutions.com>,
"Lokesh Vutla" <lokeshvutla@ti.com>,
"Neil Armstrong" <narmstrong@baylibre.com>,
"Peter Robinson" <pbrobinson@gmail.com>,
"Tim Harvey" <tharvey@gateworks.com>
Subject: [PATCH v2 0/8] arm: kirkwood: Add support for Pogoplug V4
Date: Wed, 22 Dec 2021 23:26:40 -0800 [thread overview]
Message-ID: <20211223072649.13237-1-mibodhi@gmail.com> (raw)
Pogoplug V4 specifications:
Kirkwood 88F6192 SoC
800 MHz CPU
1Gbs Ethernet
128 MB RAM
128 MB NAND
1x USB 2.0
2x USB 3.0 (on PCIe bus)
1 SDHC slot
1x External SATA port (USM enclosure form factor slot)
Thanks to all v1 reviewers, all their comments were incorporated in this v2 patch series.
Changes in v2:
- Use mainline Linux DTS version
- Use canonical format for defconfig file
- Merge all constants into the pogo_v4.c file, remove pogo_v4.h
Merge constants from header file.
Tony Dinh (8):
arm: kirkwood: Pogoplug-V4 : Add DTS files
arm: kirkwood: Pogoplug V4 : Add board defconfig file
arm: kirkwood: Pogoplug-V4 : Add Kconfig files
arm: kirkwood: Pogoplug-V4 : Add board include configs file
arm: kirkwood: Pogoplug-V4 : Add board kwbimage file
arm: kirkwood: Pogoplug-V4 : Add board Make file
arm: kirkwood: Pogoplug-V4 : Add board implementation
arm: kirkwood: Pogoplug-V4 : Add board maintainer
arch/arm/dts/Makefile | 1 +
arch/arm/dts/kirkwood-pogoplug-series-4.dts | 180 ++++++++++++++++
arch/arm/mach-kirkwood/Kconfig | 4 +
board/cloudengines/pogo_v4/Kconfig | 16 ++
board/cloudengines/pogo_v4/MAINTAINERS | 6 +
board/cloudengines/pogo_v4/Makefile | 10 +
board/cloudengines/pogo_v4/kwbimage.cfg | 148 +++++++++++++
board/cloudengines/pogo_v4/pogo_v4.c | 220 ++++++++++++++++++++
configs/pogo_v4_defconfig | 73 +++++++
include/configs/pogo_v4.h | 94 +++++++++
10 files changed, 752 insertions(+)
create mode 100644 arch/arm/dts/kirkwood-pogoplug-series-4.dts
create mode 100644 board/cloudengines/pogo_v4/Kconfig
create mode 100644 board/cloudengines/pogo_v4/MAINTAINERS
create mode 100644 board/cloudengines/pogo_v4/Makefile
create mode 100644 board/cloudengines/pogo_v4/kwbimage.cfg
create mode 100644 board/cloudengines/pogo_v4/pogo_v4.c
create mode 100644 configs/pogo_v4_defconfig
create mode 100644 include/configs/pogo_v4.h
--
2.20.1
next reply other threads:[~2021-12-23 7:27 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-23 7:26 Tony Dinh [this message]
2021-12-23 7:26 ` [PATCH v2 1/8] arm: kirkwood: Pogoplug-V4 : Add DTS files Tony Dinh
2022-01-13 13:32 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 2/8] arm: kirkwood: Pogoplug V4 : Add board defconfig file Tony Dinh
2022-01-13 13:33 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 3/8] arm: kirkwood: Pogoplug-V4 : Add Kconfig files Tony Dinh
2022-01-13 13:35 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 4/8] arm: kirkwood: Pogoplug-V4 : Add board include configs file Tony Dinh
2022-01-13 13:32 ` Stefan Roese
2022-01-13 13:36 ` Tom Rini
2022-01-14 0:50 ` Tony Dinh
2022-01-14 1:41 ` Tom Rini
2021-12-23 7:26 ` [PATCH v2 5/8] arm: kirkwood: Pogoplug-V4 : Add board kwbimage file Tony Dinh
2022-01-13 13:36 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 6/8] arm: kirkwood: Pogoplug-V4 : Add board Make file Tony Dinh
2022-01-13 13:37 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 7/8] arm: kirkwood: Pogoplug-V4 : Add board implementation Tony Dinh
2022-01-13 13:38 ` Stefan Roese
2021-12-23 7:26 ` [PATCH v2 8/8] arm: kirkwood: Pogoplug-V4 : Add board maintainer Tony Dinh
2022-01-13 13:40 ` Stefan Roese
2022-01-13 23:32 ` Tony Dinh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211223072649.13237-1-mibodhi@gmail.com \
--to=mibodhi@gmail.com \
--cc=andre.przywara@arm.com \
--cc=christianshewitt@gmail.com \
--cc=david.c.purdy@gmail.com \
--cc=festevam@denx.de \
--cc=jagan@amarulasolutions.com \
--cc=lokeshvutla@ti.com \
--cc=marek.behun@nic.cz \
--cc=narmstrong@baylibre.com \
--cc=pali@kernel.org \
--cc=pbrobinson@gmail.com \
--cc=sr@denx.de \
--cc=tharvey@gateworks.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox