From: Tommaso Merciai <tomm.merciai@gmail.com>
To: Adam Ford <aford173@gmail.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>,
Teresa Remmet <t.remmet@phytec.de>,
U-Boot Mailing List <u-boot@lists.denx.de>
Subject: Re: [RFC PATCH v3 4/5] beacon: imx8mn: override env_get_location in imx8mn_beacon.c
Date: Sun, 26 Dec 2021 12:46:03 +0100 [thread overview]
Message-ID: <20211226114603.GA90947@tom-desktop> (raw)
In-Reply-To: <CAHCN7x+oDyO5+1EL=bV+o9f3T9cLtQyajZTFjj+W1cf8z+1Xgw@mail.gmail.com>
On Sun, Dec 26, 2021 at 11:23:41AM +0000, Adam Ford wrote:
> On Sun, Dec 26, 2021 at 11:17 AM Tommaso Merciai <tomm.merciai@gmail.com>
> wrote:
>
> > On Sun, Dec 26, 2021 at 09:20:30AM +0000, Adam Ford wrote:
> > > On Sat, Dec 25, 2021 at 8:26 PM Tommaso Merciai <tomm.merciai@gmail.com>
> > > wrote:
> > >
> > > > Override env_get_location function at board level, previously dropped
> > > > down from arch/arm/mach-imx/imx8m/soc.c
> > > >
> > > > References:
> > > > - commit 37d3e3bb95d7532e2503f115dd6c6762fd3b0262
> > > >
> > > >
> > > I am traveling, so I can't test this. However, I question why not make
> > the
> > > function __weak and leave it where it was, so we don't have to copy this
> > > code from board to board. For those who need something that differs from
> > > this, they can write their own function which will replace the standard
> > > version.
> > >
> > > adam
> >
> > Hi Adam,
> > Thanks for your reply. env_get_location function is already declared
> > (__weak) in:
> >
> > - env/env.c
> >
> > Override 2 times the same function, is that correct?
> >
>
> I didn't know it was already _weak. I am not sure it can be done in two
> places. i'm traveling, so i dont have the source code to review it.
No problem. Take your time.
Thanks,
Tommaso
>
>
> >
> > I think can be a good solution too, declare it as __weak in soc.c and
> > override
> > it at board level.
> >
> > Some References:
> > -
> > https://developer.arm.com/documentation/dui0491/i/Compiler-specific-Features/--weak
> >
> > Let me know.
> >
> > Thanks,
> > Tommaso
> >
> > >
> > > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
> > > > ---
> > > > board/beacon/imx8mn/imx8mn_beacon.c | 35 ++++++++++++++++++++++++++++-
> > > > 1 file changed, 34 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/board/beacon/imx8mn/imx8mn_beacon.c
> > > > b/board/beacon/imx8mn/imx8mn_beacon.c
> > > > index 7fe252b262..05ab5613ee 100644
> > > > --- a/board/beacon/imx8mn/imx8mn_beacon.c
> > > > +++ b/board/beacon/imx8mn/imx8mn_beacon.c
> > > > @@ -6,14 +6,47 @@
> > > > #include <common.h>
> > > > #include <miiphy.h>
> > > > #include <netdev.h>
> > > > -
> > > > +#include <env_internal.h>
> > > > #include <asm/arch/clock.h>
> > > > #include <asm/arch/sys_proto.h>
> > > > +#include <asm/mach-imx/boot_mode.h>
> > > > #include <asm/global_data.h>
> > > > #include <asm/io.h>
> > > >
> > > > DECLARE_GLOBAL_DATA_PTR;
> > > >
> > > > +enum env_location env_get_location(enum env_operation op, int prio)
> > > > +{
> > > > + enum boot_device dev = get_boot_device();
> > > > + enum env_location env_loc = ENVL_UNKNOWN;
> > > > +
> > > > + if (prio)
> > > > + return env_loc;
> > > > +
> > > > + if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) && dev ==
> > QSPI_BOOT) {
> > > > + env_loc = ENVL_SPI_FLASH;
> > > > + } else if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND) && dev ==
> > NAND_BOOT) {
> > > > + env_loc = ENVL_NAND;
> > > > + } else if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC)) {
> > > > + switch (dev) {
> > > > + case SD1_BOOT:
> > > > + case SD2_BOOT:
> > > > + case SD3_BOOT:
> > > > + case MMC1_BOOT:
> > > > + case MMC2_BOOT:
> > > > + case MMC3_BOOT:
> > > > + env_loc = ENVL_MMC;
> > > > + break;
> > > > + default:
> > > > + break;
> > > > + }
> > > > + } else if (IS_ENABLED(CONFIG_ENV_IS_NOWHERE)) {
> > > > + env_loc = ENVL_MMC;
> > > > + }
> > > > +
> > > > + return env_loc;
> > > > +}
> > > > +
> > > > #if IS_ENABLED(CONFIG_FEC_MXC)
> > > > static int setup_fec(void)
> > > > {
> > > > --
> > > > 2.25.1
> > > >
> > > >
> >
next prev parent reply other threads:[~2021-12-26 11:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-25 20:25 [RFC PATCH v3 0/5] imx8m: move env_get_location for imx8mn and imx8mp at board level Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp Tommaso Merciai
2022-01-04 11:04 ` Teresa Remmet
2022-01-04 11:06 ` Michael Nazzareno Trimarchi
2022-01-04 11:48 ` Teresa Remmet
2022-01-08 19:08 ` Tommaso Merciai
2022-01-11 9:35 ` Teresa Remmet
2022-01-11 20:19 ` Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 2/5] imx: imx8mn_evk: override env_get_location Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 3/5] imx: imx8mp_evk: " Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 4/5] beacon: imx8mn: override env_get_location in imx8mn_beacon.c Tommaso Merciai
2021-12-26 9:20 ` Adam Ford
2021-12-26 11:17 ` Tommaso Merciai
2021-12-26 11:23 ` Adam Ford
2021-12-26 11:46 ` Tommaso Merciai [this message]
2022-01-26 18:05 ` Adam Ford
2022-01-26 20:58 ` Tommaso Merciai
2022-01-27 16:59 ` Adam Ford
2022-01-27 17:01 ` Michael Nazzareno Trimarchi
2022-01-27 22:39 ` Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 5/5] phytec: phycore_imx8mp: override env_get_location in phycore-imx8mp.c Tommaso Merciai
2022-01-04 10:56 ` Teresa Remmet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211226114603.GA90947@tom-desktop \
--to=tomm.merciai@gmail.com \
--cc=aford173@gmail.com \
--cc=michael@amarulasolutions.com \
--cc=t.remmet@phytec.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox