From: Jesse Taube <mr.bossman075@gmail.com>
To: u-boot@lists.denx.de
Cc: jagan@amarulasolutions.com, andre.przywara@arm.com,
hdegoede@redhat.com, sjg@chromium.org, icenowy@aosc.io,
marek.behun@nic.cz, festevam@denx.de, narmstrong@baylibre.com,
tharvey@gateworks.com, christianshewitt@gmail.com,
pbrobinson@gmail.com, lokeshvutla@ti.com,
jernej.skrabec@gmail.com, hs@denx.de, samuel@sholland.org,
arnaud.ferraris@gmail.com, giulio.benetti@benettiengineering.com,
Mr.Bossman075@gmail.com, thirtythreeforty@gmail.com
Subject: [PATCH 11/11] configs: sunxi: Add support for Lichee Pi Nano
Date: Tue, 4 Jan 2022 19:35:08 -0500 [thread overview]
Message-ID: <20220105003508.1143140-12-Mr.Bossman075@gmail.com> (raw)
In-Reply-To: <20220105003508.1143140-1-Mr.Bossman075@gmail.com>
From: Icenowy Zheng <icenowy@aosc.io>
The Lichee Pi Nano is a board based on the F1C100s.
Add defconfigs for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
---
configs/licheepi_nano_defconfig | 13 ++++++++++++
configs/licheepi_nano_spiflash_defconfig | 25 ++++++++++++++++++++++++
2 files changed, 38 insertions(+)
create mode 100644 configs/licheepi_nano_defconfig
create mode 100644 configs/licheepi_nano_spiflash_defconfig
diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig
new file mode 100644
index 0000000000..3a24870aaf
--- /dev/null
+++ b/configs/licheepi_nano_defconfig
@@ -0,0 +1,13 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUNIV=y
+CONFIG_SYS_TEXT_BASE=0x81700000
+CONFIG_SYS_LOAD_ADDR=0x81000000
+CONFIG_SYS_MALLOC_LEN=0x120000
+CONFIG_DRAM_CLK=156
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_DRAM_ZQ=0
+# CONFIG_VIDEO_SUNXI is not set
+CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano"
+CONFIG_SPL=y
+# CONFIG_SPL_DM_SERIAL is not set
diff --git a/configs/licheepi_nano_spiflash_defconfig b/configs/licheepi_nano_spiflash_defconfig
new file mode 100644
index 0000000000..07b6a27dbe
--- /dev/null
+++ b/configs/licheepi_nano_spiflash_defconfig
@@ -0,0 +1,25 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ENV_SIZE=0x8000
+CONFIG_ENV_OFFSET=0xf8000
+CONFIG_MACH_SUNIV=y
+CONFIG_DRAM_CLK=156
+CONFIG_DRAM_ZQ=0
+# CONFIG_VIDEO_SUNXI is not set
+CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano"
+CONFIG_SPL=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPL_SPI_SUNXI=y
+# CONFIG_SPL_DM_SERIAL is not set
+CONFIG_DM_SPI=y
+CONFIG_SUN6I_SPI=y
--
2.34.1
next prev parent reply other threads:[~2022-01-05 0:37 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-05 0:34 [PATCH 00/11] Add support for SUNIV and F1C100s Jesse Taube
2022-01-05 0:34 ` [PATCH 01/11] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code Jesse Taube
2022-01-21 1:57 ` Andre Przywara
2022-01-05 0:34 ` [PATCH 02/11] arm: arm926ej-s: add sunxi code Jesse Taube
2022-01-21 2:25 ` Andre Przywara
2022-01-21 3:16 ` Jesse Taube
2022-01-24 1:45 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 03/11] dt-bindings: clock: Add initial suniv headers Jesse Taube
2022-01-21 1:57 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 04/11] dt-bindings: reset: " Jesse Taube
2022-01-21 1:58 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 05/11] ARM: sunxi: Add support for F1C100s Jesse Taube
2022-01-26 2:05 ` Andre Przywara
2022-01-26 4:53 ` Jesse Taube
2022-01-26 10:08 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 06/11] sunxi: Add F1C100s DRAM initial support Jesse Taube
2022-01-05 0:35 ` [PATCH 07/11] sunxi: board: Add support for SUNIV Jesse Taube
2022-01-21 1:58 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 08/11] configs: sunxi: Add common SUNIV header Jesse Taube
2022-01-26 2:07 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 09/11] sunxi: Add support for SUNIV architecture Jesse Taube
2022-01-26 14:13 ` Andre Przywara
2022-01-26 14:38 ` Jesse Taube
2022-01-29 3:21 ` Jesse Taube
2022-01-29 11:51 ` Andre Przywara
2022-01-29 19:24 ` Jesse Taube
2022-01-29 20:44 ` Giulio Benetti
2022-01-29 20:59 ` Samuel Holland
2022-01-29 21:05 ` Jesse Taube
2022-01-29 21:18 ` Giulio Benetti
2022-01-29 21:19 ` Jesse Taube
2022-01-29 21:21 ` Giulio Benetti
2022-01-29 21:23 ` Jesse Taube
2022-01-05 0:35 ` [PATCH 10/11] ARM: dts: suniv: Add device tree files for F1C100s Jesse Taube
2022-01-21 1:59 ` Andre Przywara
2022-01-21 2:12 ` Jesse Taube
2022-01-05 0:35 ` Jesse Taube [this message]
2022-01-26 14:13 ` [PATCH 11/11] configs: sunxi: Add support for Lichee Pi Nano Andre Przywara
2022-01-26 14:48 ` Jesse Taube
2022-01-05 11:36 ` [PATCH 00/11] Add support for SUNIV and F1C100s Icenowy Zheng
2022-01-05 12:14 ` Andre Przywara
2022-01-05 12:54 ` Jesse Taube
2022-01-05 16:00 ` Giulio Benetti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220105003508.1143140-12-Mr.Bossman075@gmail.com \
--to=mr.bossman075@gmail.com \
--cc=andre.przywara@arm.com \
--cc=arnaud.ferraris@gmail.com \
--cc=christianshewitt@gmail.com \
--cc=festevam@denx.de \
--cc=giulio.benetti@benettiengineering.com \
--cc=hdegoede@redhat.com \
--cc=hs@denx.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=lokeshvutla@ti.com \
--cc=marek.behun@nic.cz \
--cc=narmstrong@baylibre.com \
--cc=pbrobinson@gmail.com \
--cc=samuel@sholland.org \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=thirtythreeforty@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox