From: Jesse Taube <mr.bossman075@gmail.com>
To: u-boot@lists.denx.de
Cc: jagan@amarulasolutions.com, andre.przywara@arm.com,
hdegoede@redhat.com, sjg@chromium.org, icenowy@aosc.io,
marek.behun@nic.cz, festevam@denx.de, narmstrong@baylibre.com,
tharvey@gateworks.com, christianshewitt@gmail.com,
pbrobinson@gmail.com, lokeshvutla@ti.com,
jernej.skrabec@gmail.com, hs@denx.de, samuel@sholland.org,
arnaud.ferraris@gmail.com, giulio.benetti@benettiengineering.com,
Mr.Bossman075@gmail.com, thirtythreeforty@gmail.com
Subject: [PATCH 08/11] configs: sunxi: Add common SUNIV header
Date: Tue, 4 Jan 2022 19:35:05 -0500 [thread overview]
Message-ID: <20220105003508.1143140-9-Mr.Bossman075@gmail.com> (raw)
In-Reply-To: <20220105003508.1143140-1-Mr.Bossman075@gmail.com>
From: Icenowy Zheng <icenowy@aosc.io>
Adds support for SUNIV and the F1C100s.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
---
include/configs/suniv.h | 14 +++++++
include/configs/sunxi-common.h | 67 ++++++++++++++++++++++++----------
2 files changed, 62 insertions(+), 19 deletions(-)
create mode 100644 include/configs/suniv.h
diff --git a/include/configs/suniv.h b/include/configs/suniv.h
new file mode 100644
index 0000000000..6118cd5e1a
--- /dev/null
+++ b/include/configs/suniv.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for new Allwinner F-series (suniv) CPU
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 7260eb72a4..62004a09c1 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -22,7 +22,12 @@
/* Serial & console */
#define CONFIG_SYS_NS16550_SERIAL
/* ns16550 reg in the low bits of cpu reg */
+#ifndef CONFIG_MACH_SUNIV
#define CONFIG_SYS_NS16550_CLK 24000000
+#else
+/* suniv doesn't have apb2 and uart is connected to apb1 */
+#define CONFIG_SYS_NS16550_CLK 100000000
+#endif
#ifndef CONFIG_DM_SERIAL
# define CONFIG_SYS_NS16550_REG_SIZE -4
# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
@@ -49,6 +54,16 @@
* since it needs to fit in with the other values. By also #defining it
* we get warnings if the Kconfig value mismatches. */
#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000
+#elif defined(CONFIG_MACH_SUNIV)
+#define SDRAM_OFFSET(x) 0x8##x
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
+/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
+ * since it needs to fit in with the other values. By also #defining it
+ * we get warnings if the Kconfig value mismatches.
+ */
+#define CONFIG_SPL_STACK_R_ADDR 0x81e00000
+#define CONFIG_SPL_BSS_START_ADDR 0x81f80000
#else
#define SDRAM_OFFSET(x) 0x4##x
#define CONFIG_SYS_SDRAM_BASE 0x40000000
@@ -109,6 +124,8 @@
#endif
#define CONFIG_SYS_MMC_MAX_DEVICE 4
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_SECT_SIZE 0x1000
#endif
/*
@@ -187,32 +204,44 @@
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FF00000))
#else
-/*
- * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
- * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
- * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
- */
-#ifndef CONFIG_MACH_SUN8I_V3S
-#define BOOTM_SIZE __stringify(0xa000000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000))
-#else
+#if defined(CONFIG_MACH_SUN8I_V3S)
/*
* 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
* 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
* 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
*/
-#define BOOTM_SIZE __stringify(0x2e00000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
+#define BOOTM_SIZE __stringify(0x2e00000)
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000))
#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000))
+#elif defined(CONFIG_MACH_SUNIV)
+/*
+ * 32M RAM minus 1MB heap + 8MB for u-boot, stack, fb, etc.
+ * 8M uncompressed kernel, 4M compressed kernel, 512K fdt,
+ * 512K script, 512K pxe and the ramdisk at the end.
+ */
+#define BOOTM_SIZE __stringify(0x1700000)
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0500000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(0C00000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(0C50000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(0D00000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(0D50000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(0D60000))
+#else
+/*
+ * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
+ * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe and the ramdisk at the end.
+ */
+#define BOOTM_SIZE __stringify(0xa000000)
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000))
#endif
#endif
--
2.34.1
next prev parent reply other threads:[~2022-01-05 0:37 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-05 0:34 [PATCH 00/11] Add support for SUNIV and F1C100s Jesse Taube
2022-01-05 0:34 ` [PATCH 01/11] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code Jesse Taube
2022-01-21 1:57 ` Andre Przywara
2022-01-05 0:34 ` [PATCH 02/11] arm: arm926ej-s: add sunxi code Jesse Taube
2022-01-21 2:25 ` Andre Przywara
2022-01-21 3:16 ` Jesse Taube
2022-01-24 1:45 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 03/11] dt-bindings: clock: Add initial suniv headers Jesse Taube
2022-01-21 1:57 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 04/11] dt-bindings: reset: " Jesse Taube
2022-01-21 1:58 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 05/11] ARM: sunxi: Add support for F1C100s Jesse Taube
2022-01-26 2:05 ` Andre Przywara
2022-01-26 4:53 ` Jesse Taube
2022-01-26 10:08 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 06/11] sunxi: Add F1C100s DRAM initial support Jesse Taube
2022-01-05 0:35 ` [PATCH 07/11] sunxi: board: Add support for SUNIV Jesse Taube
2022-01-21 1:58 ` Andre Przywara
2022-01-05 0:35 ` Jesse Taube [this message]
2022-01-26 2:07 ` [PATCH 08/11] configs: sunxi: Add common SUNIV header Andre Przywara
2022-01-05 0:35 ` [PATCH 09/11] sunxi: Add support for SUNIV architecture Jesse Taube
2022-01-26 14:13 ` Andre Przywara
2022-01-26 14:38 ` Jesse Taube
2022-01-29 3:21 ` Jesse Taube
2022-01-29 11:51 ` Andre Przywara
2022-01-29 19:24 ` Jesse Taube
2022-01-29 20:44 ` Giulio Benetti
2022-01-29 20:59 ` Samuel Holland
2022-01-29 21:05 ` Jesse Taube
2022-01-29 21:18 ` Giulio Benetti
2022-01-29 21:19 ` Jesse Taube
2022-01-29 21:21 ` Giulio Benetti
2022-01-29 21:23 ` Jesse Taube
2022-01-05 0:35 ` [PATCH 10/11] ARM: dts: suniv: Add device tree files for F1C100s Jesse Taube
2022-01-21 1:59 ` Andre Przywara
2022-01-21 2:12 ` Jesse Taube
2022-01-05 0:35 ` [PATCH 11/11] configs: sunxi: Add support for Lichee Pi Nano Jesse Taube
2022-01-26 14:13 ` Andre Przywara
2022-01-26 14:48 ` Jesse Taube
2022-01-05 11:36 ` [PATCH 00/11] Add support for SUNIV and F1C100s Icenowy Zheng
2022-01-05 12:14 ` Andre Przywara
2022-01-05 12:54 ` Jesse Taube
2022-01-05 16:00 ` Giulio Benetti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220105003508.1143140-9-Mr.Bossman075@gmail.com \
--to=mr.bossman075@gmail.com \
--cc=andre.przywara@arm.com \
--cc=arnaud.ferraris@gmail.com \
--cc=christianshewitt@gmail.com \
--cc=festevam@denx.de \
--cc=giulio.benetti@benettiengineering.com \
--cc=hdegoede@redhat.com \
--cc=hs@denx.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=lokeshvutla@ti.com \
--cc=marek.behun@nic.cz \
--cc=narmstrong@baylibre.com \
--cc=pbrobinson@gmail.com \
--cc=samuel@sholland.org \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=thirtythreeforty@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox