Re: mkimage_fit_atf.sh: not found

[Tom Rini <trini@konsulko.com>]

[-- Attachment #1: Type: text/plain, Size: 1666 bytes --]

On Tue, Jan 04, 2022 at 07:54:38PM -0300, Fabio Estevam wrote:
> HI Tim,
> 
> On Tue, Jan 4, 2022 at 7:48 PM Tim Harvey <tharvey@gateworks.com> wrote:
> >
> > Stefano and Fabio,
> >
> > I'm seeing the imx8mm_venice_defconfig target failing to build on
> > master due to mkimage_fit_atf.sh not found:
> > ./"arch/arm/mach-imx/mkimage_fit_atf.sh" \
> > arch/arm/dts/imx8mm-venice-gw71xx-0x.dtb
> > arch/arm/dts/imx8mm-venice-gw72xx-0x.dtb
> > arch/arm/dts/imx8mm-venice-gw73xx-0x.dtb
> > arch/arm/dts/imx8mm-venice-gw7901.dtb
> > arch/arm/dts/imx8mm-venice-gw7902.dtb > u-boot.its
> > /bin/sh: 1: ./arch/arm/mach-imx/mkimage_fit_atf.sh: not found
> >
> > As far as I can tell the other boards that are still using
> > SPL_FIT_GENERATOR also fail due to this (ie imx8mm_beacon_defconfig,
> > imx8mq_evk_defconfig, imx8mm-icore-mx8mm-edimm2.2_defconfig, etc).
> >
> > What is the state of the binman conversion? I submitted a series to
> > convert my boards to binman and it has just been sitting without any
> > response for months now [1].
> >
> > I'm not sure when the above breakage occurred but the conversion to
> > binman resolves it and other things.
> >
> > Please let me know what you expect me to do to resolve this as there
> > is a release pending.
> >
> > Best regards,
> >
> > Tim
> > [1] https://patchwork.ozlabs.org/project/uboot/patch/20211006201700.3018-1-tharvey@gateworks.com/
> 
> Stefano is on vacation. Tom, would you mind picking Tim's series?

Looking at the thread, there's a few pre-requisite patches?  And is this
also one of the "switch to binman" patches that then fails in CI?
Thanks.

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]