From: Tommaso Merciai <tomm.merciai@gmail.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>,
U-Boot-Denx <u-boot@lists.denx.de>,
Peter Robinson <pbrobinson@gmail.com>
Subject: Re: [PATCH 2/2] udoo: neo: Do not print the Model information
Date: Wed, 5 Jan 2022 22:10:03 +0100 [thread overview]
Message-ID: <20220105211003.GB2177@tom-desktop> (raw)
In-Reply-To: <CAOMZO5CfCxnhqnE++q_TkMaQaw7DDdLnz+M9Q0Wkyt4uSEQ9sQ@mail.gmail.com>
On Wed, Jan 05, 2022 at 05:52:23PM -0300, Fabio Estevam wrote:
> Hi Tommaso,
>
> On Wed, Jan 5, 2022 at 5:47 PM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
>
> > Hi Fabio,
> > Thanks, I test your patch on basic and extended model. Below some logs
> > seems all work properly. I hope I helped the cause :)
>
> Yes, thanks a lot!
>
> > - BASIC log:
> > -------------------------------------------------------------------------
> > U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 21:38:32 +0100)
> >
> > CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> > CPU: Extended Commercial temperature grade (-20C to 105C) at 32C
> > Reset cause: POR
> > Model: UDOO Neo Basic
>
> I assume you have only applied 1/2 and not 2/2.
>
> With 2/2 applied the Model line should not be printed.
>
> Thanks
Yes, Fabio. Sorry, I forgot. Below test with 2/2.
U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 22:07:22 +0100)
CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 45C
Reset cause: POR
Board: UDOO Neo BASIC
I2C: ready
DRAM: 512 MiB
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Net: eth0: ethernet@2188000
Hit any key to stop autoboot: 0
U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 22:07:22 +0100)
CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 35C
Reset cause: POR
Board: UDOO Neo EXTENDED
I2C: ready
DRAM: 1 GiB
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Net:
Error: ethernet@2188000 address not set.
No ethernet found.
Hit any key to stop autoboot: 0
Thanks,
Tommaso
next prev parent reply other threads:[~2022-01-05 21:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-03 15:15 [PATCH 1/2] udoo: neo: Fix the board model printing Fabio Estevam
2022-01-03 15:15 ` [PATCH 2/2] udoo: neo: Do not print the Model information Fabio Estevam
2022-01-05 20:47 ` Tommaso Merciai
2022-01-05 20:52 ` Fabio Estevam
2022-01-05 21:10 ` Tommaso Merciai [this message]
2022-01-08 18:55 ` Tommaso Merciai
2022-01-07 17:03 ` Tom Rini
2022-01-07 17:03 ` [PATCH 1/2] udoo: neo: Fix the board model printing Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220105211003.GB2177@tom-desktop \
--to=tomm.merciai@gmail.com \
--cc=festevam@gmail.com \
--cc=pbrobinson@gmail.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox