From: Tommaso Merciai <tomm.merciai@gmail.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>,
U-Boot-Denx <u-boot@lists.denx.de>,
Peter Robinson <pbrobinson@gmail.com>
Subject: Re: [PATCH 2/2] udoo: neo: Do not print the Model information
Date: Sat, 8 Jan 2022 19:55:34 +0100 [thread overview]
Message-ID: <20220108185534.GA2633@tom-desktop> (raw)
In-Reply-To: <20220105211003.GB2177@tom-desktop>
On Wed, Jan 05, 2022 at 10:10:03PM +0100, Tommaso Merciai wrote:
> On Wed, Jan 05, 2022 at 05:52:23PM -0300, Fabio Estevam wrote:
> > Hi Tommaso,
> >
> > On Wed, Jan 5, 2022 at 5:47 PM Tommaso Merciai <tomm.merciai@gmail.com> wrote:
> >
> > > Hi Fabio,
> > > Thanks, I test your patch on basic and extended model. Below some logs
> > > seems all work properly. I hope I helped the cause :)
> >
> > Yes, thanks a lot!
It's a pleasure, nice team work :)
Tommaso
> >
> > > - BASIC log:
> > > -------------------------------------------------------------------------
> > > U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 21:38:32 +0100)
> > >
> > > CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> > > CPU: Extended Commercial temperature grade (-20C to 105C) at 32C
> > > Reset cause: POR
> > > Model: UDOO Neo Basic
> >
> > I assume you have only applied 1/2 and not 2/2.
> >
> > With 2/2 applied the Model line should not be printed.
> >
> > Thanks
>
> Yes, Fabio. Sorry, I forgot. Below test with 2/2.
>
> U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 22:07:22 +0100)
>
> CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> CPU: Extended Commercial temperature grade (-20C to 105C) at 45C
> Reset cause: POR
> Board: UDOO Neo BASIC
> I2C: ready
> DRAM: 512 MiB
> PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
> MMC: FSL_SDHC: 1, FSL_SDHC: 2
> Loading Environment from MMC... OK
> In: serial
> Out: serial
> Err: serial
> Net: eth0: ethernet@2188000
> Hit any key to stop autoboot: 0
>
>
> U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 22:07:22 +0100)
>
> CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> CPU: Extended Commercial temperature grade (-20C to 105C) at 35C
> Reset cause: POR
> Board: UDOO Neo EXTENDED
> I2C: ready
> DRAM: 1 GiB
> PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
> MMC: FSL_SDHC: 1, FSL_SDHC: 2
> Loading Environment from MMC... OK
> In: serial
> Out: serial
> Err: serial
> Net:
> Error: ethernet@2188000 address not set.
> No ethernet found.
>
> Hit any key to stop autoboot: 0
>
> Thanks,
> Tommaso
next prev parent reply other threads:[~2022-01-08 18:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-03 15:15 [PATCH 1/2] udoo: neo: Fix the board model printing Fabio Estevam
2022-01-03 15:15 ` [PATCH 2/2] udoo: neo: Do not print the Model information Fabio Estevam
2022-01-05 20:47 ` Tommaso Merciai
2022-01-05 20:52 ` Fabio Estevam
2022-01-05 21:10 ` Tommaso Merciai
2022-01-08 18:55 ` Tommaso Merciai [this message]
2022-01-07 17:03 ` Tom Rini
2022-01-07 17:03 ` [PATCH 1/2] udoo: neo: Fix the board model printing Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220108185534.GA2633@tom-desktop \
--to=tomm.merciai@gmail.com \
--cc=festevam@gmail.com \
--cc=pbrobinson@gmail.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox