From: Tommaso Merciai <tomm.merciai@gmail.com>
To: Teresa Remmet <T.Remmet@phytec.de>
Cc: "ye.li@nxp.com" <ye.li@nxp.com>,
"uboot-imx@nxp.com" <uboot-imx@nxp.com>,
"festevam@gmail.com" <festevam@gmail.com>,
"peng.fan@nxp.com" <peng.fan@nxp.com>,
"michael@amarulasolutions.com" <michael@amarulasolutions.com>,
"sbabic@denx.de" <sbabic@denx.de>, "hws@denx.de" <hws@denx.de>,
"marex@denx.de" <marex@denx.de>,
"sjg@chromium.org" <sjg@chromium.org>,
"frieder.schrempf@kontron.de" <frieder.schrempf@kontron.de>,
"u-boot@lists.denx.de" <u-boot@lists.denx.de>
Subject: Re: [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp
Date: Tue, 11 Jan 2022 21:19:21 +0100 [thread overview]
Message-ID: <20220111201921.GA4503@tom-desktop> (raw)
In-Reply-To: <f7480ac5bf7ae71058c1e0a0bf6093dcd1913ce5.camel@phytec.de>
On Tue, Jan 11, 2022 at 09:35:54AM +0000, Teresa Remmet wrote:
> Hello Tommaso,
>
> Am Samstag, dem 08.01.2022 um 20:08 +0100 schrieb Tommaso Merciai:
> > On Tue, Jan 04, 2022 at 11:04:10AM +0000, Teresa Remmet wrote:
> > > Hello Tommaso,
> > >
> > > Am Samstag, dem 25.12.2021 um 21:25 +0100 schrieb Tommaso Merciai:
> > > > This function defined for two architecture is not really generic
> > > > and can generate problem when people add a new board.
> > > >
> > > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
> > > > ---
> > > > arch/arm/mach-imx/imx8m/soc.c | 39 ---------------------------
> > > > ----
> > > > ----
> > > > 1 file changed, 39 deletions(-)
> > > >
> > > > diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-
> > > > imx/imx8m/soc.c
> > > > index 863508776d..f0030a557a 100644
> > > > --- a/arch/arm/mach-imx/imx8m/soc.c
> > > > +++ b/arch/arm/mach-imx/imx8m/soc.c
> > > > @@ -1313,45 +1313,6 @@ void do_error(struct pt_regs *pt_regs,
> > > > unsigned int esr)
> > > > #endif
> > > >
> > > > #if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
> > > > -enum env_location env_get_location(enum env_operation op, int
> > > > prio)
> > > > -{
> > > > - enum boot_device dev = get_boot_device();
> > > > - enum env_location env_loc = ENVL_UNKNOWN;
> > > > -
> > > > - if (prio)
> > > > - return env_loc;
> > > > -
> > > > - switch (dev) {
> > > > -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
> > > > - case QSPI_BOOT:
> > > > - env_loc = ENVL_SPI_FLASH;
> > > > - break;
> > > > -#endif
> > > > -#ifdef CONFIG_ENV_IS_IN_NAND
> > > > - case NAND_BOOT:
> > > > - env_loc = ENVL_NAND;
> > > > - break;
> > > > -#endif
> > > > -#ifdef CONFIG_ENV_IS_IN_MMC
> > > > - case SD1_BOOT:
> > > > - case SD2_BOOT:
> > > > - case SD3_BOOT:
> > > > - case MMC1_BOOT:
> > > > - case MMC2_BOOT:
> > > > - case MMC3_BOOT:
> > > > - env_loc = ENVL_MMC;
> > > > - break;
> > > > -#endif
> > > > - default:
> > > > -#if defined(CONFIG_ENV_IS_NOWHERE)
> > > > - env_loc = ENVL_NOWHERE;
> > > > -#endif
> > > > - break;
> > > > - }
> > > > -
> > > > - return env_loc;
> > > > -}
> > > > -
> > > > #ifndef ENV_IS_EMBEDDED
> > > > long long env_get_offset(long long defautl_offset)
> > >
> > > would it not make sense to move also env_get_offset() to board
> > > level?
> >
> > Hi Teresa,
> > I think is better to put this function at board level. In this way
> > others boards that use i.MX8MN/i.MX8MM SOC can customize
> > env_get_location
> > function. For example: maybe one user want store U-Boot env on a
> > device
> > other than the boot device.
>
> Michael send a patch to remove the function. Which I missed. See:
> https://lore.kernel.org/u-boot/20211117143456.34441-1-michael@amarulasolutions.com/
>
> So everything is fine then.
>
> Thanks,
> Teresa
Hi Teresa,
Perfect.
Thanks,
Tommaso
>
> >
> > Tommaso
> > > Regards,
> > > Teresa
> > >
> > >
> > > > {
> > > --
> > > PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz,
> > > Germany
> > >
> > > Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber
> > > |
> > > Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr.
> > > 266500608, DE
> > > 149059855
> --
> PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
>
> Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
> Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE
> 149059855
next prev parent reply other threads:[~2022-01-11 20:19 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-25 20:25 [RFC PATCH v3 0/5] imx8m: move env_get_location for imx8mn and imx8mp at board level Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp Tommaso Merciai
2022-01-04 11:04 ` Teresa Remmet
2022-01-04 11:06 ` Michael Nazzareno Trimarchi
2022-01-04 11:48 ` Teresa Remmet
2022-01-08 19:08 ` Tommaso Merciai
2022-01-11 9:35 ` Teresa Remmet
2022-01-11 20:19 ` Tommaso Merciai [this message]
2021-12-25 20:25 ` [RFC PATCH v3 2/5] imx: imx8mn_evk: override env_get_location Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 3/5] imx: imx8mp_evk: " Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 4/5] beacon: imx8mn: override env_get_location in imx8mn_beacon.c Tommaso Merciai
2021-12-26 9:20 ` Adam Ford
2021-12-26 11:17 ` Tommaso Merciai
2021-12-26 11:23 ` Adam Ford
2021-12-26 11:46 ` Tommaso Merciai
2022-01-26 18:05 ` Adam Ford
2022-01-26 20:58 ` Tommaso Merciai
2022-01-27 16:59 ` Adam Ford
2022-01-27 17:01 ` Michael Nazzareno Trimarchi
2022-01-27 22:39 ` Tommaso Merciai
2021-12-25 20:25 ` [RFC PATCH v3 5/5] phytec: phycore_imx8mp: override env_get_location in phycore-imx8mp.c Tommaso Merciai
2022-01-04 10:56 ` Teresa Remmet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220111201921.GA4503@tom-desktop \
--to=tomm.merciai@gmail.com \
--cc=T.Remmet@phytec.de \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=hws@denx.de \
--cc=marex@denx.de \
--cc=michael@amarulasolutions.com \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox