* [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig
@ 2022-01-12 8:57 Heiko Thiery
2022-01-12 8:57 ` [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi Heiko Thiery
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Heiko Thiery @ 2022-01-12 8:57 UTC (permalink / raw)
To: u-boot
Cc: Stefano Babic, Fabio Estevam, Adam Ford, Frieder Schrempf,
Heiko Thiery
CONFIG_SPL_MMC and CONFIG_SPL_SERIAL
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
---
configs/kontron-sl-mx8mm_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig
index 35d12fca32..940bf07a92 100644
--- a/configs/kontron-sl-mx8mm_defconfig
+++ b/configs/kontron-sl-mx8mm_defconfig
@@ -15,6 +15,8 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="imx8mm-kontron-n801x-s"
CONFIG_SPL_TEXT_BASE=0x7E1000
CONFIG_TARGET_KONTRON_MX8MM=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
--
2.30.2
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi 2022-01-12 8:57 [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig Heiko Thiery @ 2022-01-12 8:57 ` Heiko Thiery 2022-01-12 13:03 ` Frieder Schrempf 2022-02-05 16:42 ` sbabic 2022-01-12 13:02 ` [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig Frieder Schrempf 2022-02-05 16:41 ` sbabic 2 siblings, 2 replies; 6+ messages in thread From: Heiko Thiery @ 2022-01-12 8:57 UTC (permalink / raw) To: u-boot Cc: Stefano Babic, Fabio Estevam, Adam Ford, Frieder Schrempf, Heiko Thiery When using a board variant that selects the lvds specific dtb the *.u-boot.dtsi file will not be included. To have a lvds dtb specific u-boot.dtsi file move this part to a common board u-boot.dtsi file and include this in the board base u-boot.dtsi and create an additional one for the lvds variant. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> --- .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 + .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 124 +---------------- arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 128 ++++++++++++++++++ 3 files changed, 135 insertions(+), 123 deletions(-) create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi new file mode 100644 index 0000000000..4bf75722bf --- /dev/null +++ b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-kontron-n801x-u-boot.dtsi" diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi index 22d18e6f1c..4bf75722bf 100644 --- a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi @@ -3,126 +3,4 @@ * Copyright (C) 2019 Kontron Electronics GmbH */ -#include "imx8mm-u-boot.dtsi" - -/ { - aliases { - usb0 = &usbotg1; - usb1 = &usbotg2; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdog1>; - u-boot,dm-spl; - }; - - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - }; -}; - -&fec1 { - phy-mode = "rgmii-rxid"; -}; - -&i2c1 { - u-boot,dm-spl; - u-boot,dm-pre-reloc; -}; - -&i2c2 { - status = "okay"; - u-boot,dm-spl; - u-boot,dm-pre-reloc; -}; - -&pinctrl_ecspi1 { - u-boot,dm-spl; -}; - -&pinctrl_i2c1 { - u-boot,dm-spl; -}; - -&pinctrl_pmic { - u-boot,dm-spl; - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 - /* Disable Pullup for SD_VSEL */ - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 - >; -}; - -&pinctrl_uart3 { - u-boot,dm-spl; - u-boot,dm-pre-reloc; -}; - -&pinctrl_usdhc1 { - u-boot,dm-spl; -}; - -&pinctrl_usdhc1_100mhz { - u-boot,dm-spl; -}; - -&pinctrl_usdhc1_200mhz { - u-boot,dm-spl; -}; - -&pinctrl_usdhc2 { - u-boot,dm-spl; -}; - -&pca9450 { - u-boot,dm-spl; -}; - -&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { - u-boot,dm-spl; -}; - -&ecspi1 { - u-boot,dm-spl; -}; - -&gpio1 { - u-boot,dm-spl; -}; - -&gpio2 { - u-boot,dm-spl; -}; - -&gpio3 { - u-boot,dm-spl; -}; - -&gpio4 { - u-boot,dm-spl; -}; - -&gpio5 { - u-boot,dm-spl; -}; - -&uart3 { - u-boot,dm-spl; - u-boot,dm-pre-reloc; -}; - -&usdhc1 { - u-boot,dm-spl; -}; - -&usdhc2 { - u-boot,dm-spl; -}; - -&wdog1 { - u-boot,dm-spl; -}; +#include "imx8mm-kontron-n801x-u-boot.dtsi" diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi new file mode 100644 index 0000000000..22d18e6f1c --- /dev/null +++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm-u-boot.dtsi" + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&fec1 { + phy-mode = "rgmii-rxid"; +}; + +&i2c1 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&i2c2 { + status = "okay"; + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_ecspi1 { + u-boot,dm-spl; +}; + +&pinctrl_i2c1 { + u-boot,dm-spl; +}; + +&pinctrl_pmic { + u-boot,dm-spl; + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + /* Disable Pullup for SD_VSEL */ + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 + >; +}; + +&pinctrl_uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_100mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_200mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; + +&pca9450 { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { + u-boot,dm-spl; +}; + +&ecspi1 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&wdog1 { + u-boot,dm-spl; +}; -- 2.30.2 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi 2022-01-12 8:57 ` [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi Heiko Thiery @ 2022-01-12 13:03 ` Frieder Schrempf 2022-02-05 16:42 ` sbabic 1 sibling, 0 replies; 6+ messages in thread From: Frieder Schrempf @ 2022-01-12 13:03 UTC (permalink / raw) To: Heiko Thiery, u-boot; +Cc: Stefano Babic, Fabio Estevam, Adam Ford On 12.01.22 09:57, Heiko Thiery wrote: > When using a board variant that selects the lvds specific dtb the > *.u-boot.dtsi file will not be included. To have a lvds dtb specific > u-boot.dtsi file move this part to a common board u-boot.dtsi file and > include this in the board base u-boot.dtsi and create an additional one > for the lvds variant. > > Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> > --- > .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 + > .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 124 +---------------- > arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 128 ++++++++++++++++++ > 3 files changed, 135 insertions(+), 123 deletions(-) > create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi > create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi > > diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi > new file mode 100644 > index 0000000000..4bf75722bf > --- /dev/null > +++ b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi > @@ -0,0 +1,6 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2019 Kontron Electronics GmbH > + */ > + > +#include "imx8mm-kontron-n801x-u-boot.dtsi" > diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi > index 22d18e6f1c..4bf75722bf 100644 > --- a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi > +++ b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi > @@ -3,126 +3,4 @@ > * Copyright (C) 2019 Kontron Electronics GmbH > */ > > -#include "imx8mm-u-boot.dtsi" > - > -/ { > - aliases { > - usb0 = &usbotg1; > - usb1 = &usbotg2; > - }; > - > - wdt-reboot { > - compatible = "wdt-reboot"; > - wdt = <&wdog1>; > - u-boot,dm-spl; > - }; > - > - firmware { > - optee { > - compatible = "linaro,optee-tz"; > - method = "smc"; > - }; > - }; > -}; > - > -&fec1 { > - phy-mode = "rgmii-rxid"; > -}; > - > -&i2c1 { > - u-boot,dm-spl; > - u-boot,dm-pre-reloc; > -}; > - > -&i2c2 { > - status = "okay"; > - u-boot,dm-spl; > - u-boot,dm-pre-reloc; > -}; > - > -&pinctrl_ecspi1 { > - u-boot,dm-spl; > -}; > - > -&pinctrl_i2c1 { > - u-boot,dm-spl; > -}; > - > -&pinctrl_pmic { > - u-boot,dm-spl; > - fsl,pins = < > - MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 > - /* Disable Pullup for SD_VSEL */ > - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 > - >; > -}; > - > -&pinctrl_uart3 { > - u-boot,dm-spl; > - u-boot,dm-pre-reloc; > -}; > - > -&pinctrl_usdhc1 { > - u-boot,dm-spl; > -}; > - > -&pinctrl_usdhc1_100mhz { > - u-boot,dm-spl; > -}; > - > -&pinctrl_usdhc1_200mhz { > - u-boot,dm-spl; > -}; > - > -&pinctrl_usdhc2 { > - u-boot,dm-spl; > -}; > - > -&pca9450 { > - u-boot,dm-spl; > -}; > - > -&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { > - u-boot,dm-spl; > -}; > - > -&ecspi1 { > - u-boot,dm-spl; > -}; > - > -&gpio1 { > - u-boot,dm-spl; > -}; > - > -&gpio2 { > - u-boot,dm-spl; > -}; > - > -&gpio3 { > - u-boot,dm-spl; > -}; > - > -&gpio4 { > - u-boot,dm-spl; > -}; > - > -&gpio5 { > - u-boot,dm-spl; > -}; > - > -&uart3 { > - u-boot,dm-spl; > - u-boot,dm-pre-reloc; > -}; > - > -&usdhc1 { > - u-boot,dm-spl; > -}; > - > -&usdhc2 { > - u-boot,dm-spl; > -}; > - > -&wdog1 { > - u-boot,dm-spl; > -}; > +#include "imx8mm-kontron-n801x-u-boot.dtsi" > diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi > new file mode 100644 > index 0000000000..22d18e6f1c > --- /dev/null > +++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi > @@ -0,0 +1,128 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2019 Kontron Electronics GmbH > + */ > + > +#include "imx8mm-u-boot.dtsi" > + > +/ { > + aliases { > + usb0 = &usbotg1; > + usb1 = &usbotg2; > + }; > + > + wdt-reboot { > + compatible = "wdt-reboot"; > + wdt = <&wdog1>; > + u-boot,dm-spl; > + }; > + > + firmware { > + optee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + }; > +}; > + > +&fec1 { > + phy-mode = "rgmii-rxid"; > +}; > + > +&i2c1 { > + u-boot,dm-spl; > + u-boot,dm-pre-reloc; > +}; > + > +&i2c2 { > + status = "okay"; > + u-boot,dm-spl; > + u-boot,dm-pre-reloc; > +}; > + > +&pinctrl_ecspi1 { > + u-boot,dm-spl; > +}; > + > +&pinctrl_i2c1 { > + u-boot,dm-spl; > +}; > + > +&pinctrl_pmic { > + u-boot,dm-spl; > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 > + /* Disable Pullup for SD_VSEL */ > + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 > + >; > +}; > + > +&pinctrl_uart3 { > + u-boot,dm-spl; > + u-boot,dm-pre-reloc; > +}; > + > +&pinctrl_usdhc1 { > + u-boot,dm-spl; > +}; > + > +&pinctrl_usdhc1_100mhz { > + u-boot,dm-spl; > +}; > + > +&pinctrl_usdhc1_200mhz { > + u-boot,dm-spl; > +}; > + > +&pinctrl_usdhc2 { > + u-boot,dm-spl; > +}; > + > +&pca9450 { > + u-boot,dm-spl; > +}; > + > +&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { > + u-boot,dm-spl; > +}; > + > +&ecspi1 { > + u-boot,dm-spl; > +}; > + > +&gpio1 { > + u-boot,dm-spl; > +}; > + > +&gpio2 { > + u-boot,dm-spl; > +}; > + > +&gpio3 { > + u-boot,dm-spl; > +}; > + > +&gpio4 { > + u-boot,dm-spl; > +}; > + > +&gpio5 { > + u-boot,dm-spl; > +}; > + > +&uart3 { > + u-boot,dm-spl; > + u-boot,dm-pre-reloc; > +}; > + > +&usdhc1 { > + u-boot,dm-spl; > +}; > + > +&usdhc2 { > + u-boot,dm-spl; > +}; > + > +&wdog1 { > + u-boot,dm-spl; > +}; ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi 2022-01-12 8:57 ` [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi Heiko Thiery 2022-01-12 13:03 ` Frieder Schrempf @ 2022-02-05 16:42 ` sbabic 1 sibling, 0 replies; 6+ messages in thread From: sbabic @ 2022-02-05 16:42 UTC (permalink / raw) To: Heiko Thiery, u-boot > When using a board variant that selects the lvds specific dtb the > *.u-boot.dtsi file will not be included. To have a lvds dtb specific > u-boot.dtsi file move this part to a common board u-boot.dtsi file and > include this in the board base u-boot.dtsi and create an additional one > for the lvds variant. > Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> > Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de ===================================================================== ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig 2022-01-12 8:57 [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig Heiko Thiery 2022-01-12 8:57 ` [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi Heiko Thiery @ 2022-01-12 13:02 ` Frieder Schrempf 2022-02-05 16:41 ` sbabic 2 siblings, 0 replies; 6+ messages in thread From: Frieder Schrempf @ 2022-01-12 13:02 UTC (permalink / raw) To: Heiko Thiery, u-boot; +Cc: Stefano Babic, Fabio Estevam, Adam Ford On 12.01.22 09:57, Heiko Thiery wrote: > CONFIG_SPL_MMC and CONFIG_SPL_SERIAL > > Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> I suspect these got lost during a defconfig resync as the Kconfig options were introduced/renamed around the same time this was merged. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> > --- > configs/kontron-sl-mx8mm_defconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig > index 35d12fca32..940bf07a92 100644 > --- a/configs/kontron-sl-mx8mm_defconfig > +++ b/configs/kontron-sl-mx8mm_defconfig > @@ -15,6 +15,8 @@ CONFIG_SPL_DM_SPI=y > CONFIG_DEFAULT_DEVICE_TREE="imx8mm-kontron-n801x-s" > CONFIG_SPL_TEXT_BASE=0x7E1000 > CONFIG_TARGET_KONTRON_MX8MM=y > +CONFIG_SPL_MMC=y > +CONFIG_SPL_SERIAL=y > CONFIG_BOOTCOUNT_BOOTLIMIT=3 > CONFIG_SPL=y > CONFIG_DISTRO_DEFAULTS=y ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig 2022-01-12 8:57 [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig Heiko Thiery 2022-01-12 8:57 ` [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi Heiko Thiery 2022-01-12 13:02 ` [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig Frieder Schrempf @ 2022-02-05 16:41 ` sbabic 2 siblings, 0 replies; 6+ messages in thread From: sbabic @ 2022-02-05 16:41 UTC (permalink / raw) To: Heiko Thiery, u-boot > CONFIG_SPL_MMC and CONFIG_SPL_SERIAL > Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> > Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de ===================================================================== ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-02-05 16:49 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-01-12 8:57 [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig Heiko Thiery 2022-01-12 8:57 ` [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi Heiko Thiery 2022-01-12 13:03 ` Frieder Schrempf 2022-02-05 16:42 ` sbabic 2022-01-12 13:02 ` [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig Frieder Schrempf 2022-02-05 16:41 ` sbabic
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox