[PATCH v8 08/15] arm: dts: rockchip: add rk3066a-mk808.dts

[Johan Jonker <jbx6244@gmail.com>]

MK808 is a RK3066-based board with 1 USB host and 1 USB OTG port,
HDMI and a micro-SD card slot. It also includes on-board NAND
and 1GB of SDRAM. Add rk3066a-mk808.dts. Move U-boot specific
things in a rk3066a-mk808-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V8:
  update dts
---
 arch/arm/dts/Makefile                  |   3 +
 arch/arm/dts/rk3066a-mk808-u-boot.dtsi |  42 +++++
 arch/arm/dts/rk3066a-mk808.dts         | 216 +++++++++++++++++++++++++
 3 files changed, 261 insertions(+)
 create mode 100644 arch/arm/dts/rk3066a-mk808-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3066a-mk808.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b3e2a9c9..189f61bd 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -89,6 +89,9 @@ dtb-$(CONFIG_ROCKCHIP_RK3036) += \
 dtb-$(CONFIG_ROCKCHIP_RK3128) += \
 	rk3128-evb.dtb
 
+dtb-$(CONFIG_ROCKCHIP_RK3066) += \
+	rk3066a-mk808.dtb
+
 dtb-$(CONFIG_ROCKCHIP_RK3188) += \
 	rk3188-radxarock.dtb
 
diff --git a/arch/arm/dts/rk3066a-mk808-u-boot.dtsi b/arch/arm/dts/rk3066a-mk808-u-boot.dtsi
new file mode 100644
index 00000000..6e5990f9
--- /dev/null
+++ b/arch/arm/dts/rk3066a-mk808-u-boot.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3066a-u-boot.dtsi"
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	compatible = "rockchip,rk3066-dmc", "syscon";
+	rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
+				0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
+				0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
+				0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
+				0x4 0x0>;
+	rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
+			       0x220 0x40 0x0 0x0>;
+	rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
+};
+
+&mmc0 {
+	fifo-mode;
+	max-frequency = <4000000>;
+	u-boot,dm-spl;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&noc {
+	compatible = "rockchip,rk3066-noc", "syscon";
+};
+
+&timer2 {
+	clock-frequency = <24000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts
new file mode 100644
index 00000000..667d57a4
--- /dev/null
+++ b/arch/arm/dts/rk3066a-mk808.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3066a.dtsi"
+
+/ {
+	model = "Rikomagic MK808";
+	compatible = "rikomagic,mk808", "rockchip,rk3066a";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		reg = <0x60000000 0x40000000>;
+		device_type = "memory";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <2500000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue_led: led-0 {
+			label = "mk808:blue:power";
+			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	hdmi_con {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vcc_2v5: vcc-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&host_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wifi: sdio-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wifi_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in_vop1 {
+	status = "disabled";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	non-removable;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb-host {
+		host_drv: host-drv {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	usb-otg {
+		otg_drv: otg-drv {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_2v5>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&vop0 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
-- 
2.20.1